suzuki PMS and repair cost

**radz15** · October 7th, 2015 10:42 AM

Thanks sir! Sang dealer ka pala madalas magpa PMS? Ok naman ba yung Service?

**jodski** · October 7th, 2015 10:49 AM

Sa Lipa City or sa Manila bay...
Ok naman service ko dito sa dalawang ito.
It wouldn't matter kung saang dealership as long as I can see in plain sight yung ginagawa sa unit :-)

Kung mahirap kausap service advisor I just move on...

**radz15** · October 7th, 2015 11:11 AM

Good thing ok ang experience mo sa manila bay. Sa celerio group kasi madaming may bad experience sa manila bay.

**jodski** · October 7th, 2015 11:21 AM

Mabilis kasi ako manita pag nakita ko na medyo sablay ang diskarte.

But between the two dealerships mas ok for me ang Lipa.

**waver** · October 7th, 2015 11:25 AM

Ok naman sa Manila Bay, if you're referring to 'Wheels'. Yun lang halo halo kasi sineservice nila..suzuki, kia, and hyundia tapos they share the same service center. So minsan medyo matagal.

**radz15** · October 19th, 2015 04:36 PM

Pag 1k PMS ba pinapalitan talaga yung oil filter saka nilalagyan agad ng flushing?

**lsalapare** · October 19th, 2015 05:21 PM

In my case, only the oil and filters were changed in my initial PMS.

**radz15** · October 19th, 2015 05:37 PM

Originally Posted by lsalapare

In my case, only the oil and filters were changed in my initial PMS.

Ang alam ko kasi good for 5k ang oil filter. Nagtataka ako bat need agad palitan un sa 1k pms

**jvnj** · October 19th, 2015 05:43 PM

Originally Posted by radz15

Ang alam ko kasi good for 5k ang oil filter. Nagtataka ako bat need agad palitan un sa 1k pms

Brand new kasi Sir, Break-in period pa. Most of the engine internal component have yet to settle to the required clearances, thus the possible oil contamination.

**jvnj** · October 19th, 2015 05:43 PM

Originally Posted by radz15

Ang alam ko kasi good for 5k ang oil filter. Nagtataka ako bat need agad palitan un sa 1k pms

Brand new kasi Sir, Break-in period pa. Most of the engine internal component have yet to settle to the required clearances, thus the possible oil contamination.