New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 1 of 2 12 LastLast
Results 1 to 20 of 24
  1. Join Date
    May 2012
    Posts
    44
    #1
    Good day sirs/maams

    I just bought this car brand new just last Thursday from Kalookan Branch, when I popped the hood at home, I saw these.. Im a newbie with cars, so can anyone please tell me if this is normal or should I get my unit replaced.

    Here is the link to the pics
    rust | Facebook

  2. Join Date
    Jul 2004
    Posts
    59
    #2
    Bro better bring back the car and ask for replacement on the rust part. You bought a brand new unit and not a second hand. Claim the warranty

  3. Join Date
    Jan 2007
    Posts
    1,036
    #3
    hmm. normally na rurust naman talaga yan exhaust manifold kasi iron ata yan pero bakit parang it looks like it came from a ten year old car

  4. Join Date
    Oct 2002
    Posts
    29,354
    #4
    Quote Originally Posted by Rev01veR View Post
    Good day sirs/maams

    I just bought this car brand new just last Thursday from Kalookan Branch, when I popped the hood at home, I saw these.. Im a newbie with cars, so can anyone please tell me if this is normal or should I get my unit replaced.

    Here is the link to the pics
    rust | Facebook
    Although you can try claiming warranty as mentioned by "Revo", I doubt if they would replace it since rust of this particular part (exhaust manifold) is expected.

  5. Join Date
    Oct 2002
    Posts
    29,354
    #5
    Quote Originally Posted by jaymd View Post
    hmm. normally na rurust naman talaga yan exhaust manifold kasi iron ata yan pero bakit parang it looks like it came from a ten year old car
    It's just surface rust.

    My main guess, the car was in storage for a while so it was dirty. Before it was delivered, the dealer had it cleaned including the engine bay. They used a pressure washer but did not dry the engine that well, leaving some water on the exhaust manifold which resulted in the rust stains when it later dried.

  6. Join Date
    Sep 2003
    Posts
    21,384
    #6
    masyado ka atang na-excite sa swift mo.

    TS...di mo ba tiningnan kabuuan ng unit mo bago mo in-accept at iniuwi ang car mo?
    sana dun pa lang, nakita na yang kalawang.

  7. Join Date
    Jan 2007
    Posts
    1,036
    #7
    kahit may rust the best pa rin yan swift. pa-detail mo na lang tapos post mo pics dito haha. sorry OT ano color swift mo?

  8. Join Date
    Sep 2003
    Posts
    21,384
    #8
    Quote Originally Posted by jaymd View Post
    kahit may rust the best pa rin yan swift. pa-detail mo na lang tapos post mo pics dito haha. sorry OT ano color swift mo?
    yung sa FB nya....red.
    ganda......



  9. Join Date
    Jul 2003
    Posts
    2,267
    #9
    that is normal.

    some parts of vehicles are normally not painted or rust-proof for practical reasons. Exhaust manifold is most probably one of those. And when these are exposed to moisture, rust can form on the surface. but just to give you some peace of mind, exhaust manifolds are made of thick metals and such rust won't affect their long-term durability.

    now if you find rust on the body work, that is a different story.

  10. Join Date
    Oct 2002
    Posts
    40,599
    #10
    It's normal but still not in a brand new car... Ako dapat magpakalawang hinde sila...have them replace or fix it...or Basta ask for something in return a free full detailing or something

  11. Join Date
    Aug 2004
    Posts
    22,702
    #11
    How did I know this thread would either be about exhaust parts or brakes?

    It's normal on any car... even new ones. It's very difficult to rust-proof an exhaust manifold. It's a cast-iron part that gets glowing red hot during the normal course of operation. Any coating you put on will eventually flake away, so they don't even bother.

    Exhaust manifolds are thick, cast iron parts. We will all be long dead and gone before it rusts all the way through.

    Ang pagbalik ng comeback...

  12. Join Date
    Aug 2004
    Posts
    22,702
    #12
    How did I know this thread would either be about exhaust parts or brakes?

    It's normal on any car... even new ones. It's very difficult to rust-proof an exhaust manifold. It's a cast-iron part that gets glowing red hot during the normal course of operation. Any coating you put on will eventually flake away, so they don't even bother.

    Exhaust manifolds are thick, cast iron parts. We will all be long dead and gone before it rusts all the way through.

    Ang pagbalik ng comeback...

  13. Join Date
    Jul 2003
    Posts
    2,267
    #13
    Quote Originally Posted by shadow View Post
    It's normal but still not in a brand new car... Ako dapat magpakalawang hinde sila...have them replace or fix it...or Basta ask for something in return a free full detailing or something
    it could have rusted overnight once the car have been out of the dealership.

  14. Join Date
    Oct 2002
    Posts
    40,599
    #14
    Quote Originally Posted by fourtheboys96

    it could have rusted overnight once the car have been out of the dealership.
    Probably but If im in his shoes i still want to squeeze something out from the dealership...

  15. Join Date
    Oct 2002
    Posts
    22,658
    #15
    Yep it's normal. Don't waste your time going back to the dealership. Lugi ka pa sa time at effort.

    Tama si niky, that part will outlast us (and even our kids).

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  16. Join Date
    May 2012
    Posts
    44
    #16
    thank you sirs sa mga swift replies nyo. hehe. i must admit na naexcite ako masyado at di ko nacheck maigi. i reported it na sa dealer and sent the pics, said theyll update tomorrow since its a holiday. but i have a new problem, hehe, sumayad ako kanina while parking, nagasgas lower lip sa bumper both sides. di sya visible. will that affect me in any way if i asked for a change unit? im a real newb and this is my 1st car, so salamat po sa lahat ng tulong mga ser.

  17. Join Date
    Oct 2002
    Posts
    29,354
    #17
    Quote Originally Posted by Rev01veR View Post
    thank you sirs sa mga swift replies nyo. hehe. i must admit na naexcite ako masyado at di ko nacheck maigi. i reported it na sa dealer and sent the pics, said theyll update tomorrow since its a holiday. but i have a new problem, hehe, sumayad ako kanina while parking, nagasgas lower lip sa bumper both sides. di sya visible. will that affect me in any way if i asked for a change unit? im a real newb and this is my 1st car, so salamat po sa lahat ng tulong mga ser.
    It is unlikely they will change your unit just for the rust "problem" on the exhaust manifold.

  18. Join Date
    May 2012
    Posts
    44
    #18
    the dealer told me that it is somehow possible to replace it since wala pa halos a week, but they will check first. My officemates said i have the power to insist since a brand new car shouldnt have that "problem" early on. so yun lang iniisip ko if the scratch i made a while ago be of hindrance in any way should I insist that they replace it.

  19. Join Date
    Oct 2002
    Posts
    29,354
    #19
    Quote Originally Posted by Rev01veR View Post
    the dealer told me that it is somehow possible to replace it since wala pa halos a week, but they will check first. My officemates said i have the power to insist since a brand new car shouldnt have that "problem" early on. so yun lang iniisip ko if the scratch i made a while ago be of hindrance in any way should I insist that they replace it.
    There might be a case if the rust is on the body panels or if you are experiencing mechanical problems of some sort. But the rust is on the exhaust manifold. It is exposed metal. It will rust whatever you do.

    Personally, its not an issue. Just enjoy the new car.

    OR...

    Its a nice excuse to upgrade your car's performance using SPEEDLAB's power package.

  20. Join Date
    May 2012
    Posts
    44
    #20
    that performance package sounds nice! pero tyaka na since im still a learning driver. Additional infos lang sir, im not sure if its visible in the pics, but there seems to be some metal that chipped off along with the rust. huge chunks. personally i dont want a new unit, maybe just let them clean it or replace the rusty part with one without chipped off parts. thanks sir.

Page 1 of 2 12 LastLast

Tags for this Thread

Is this normal on a brand new Swift? (rust)