Suzuki Ertiga - 7 seater MPV

[b_9904]

sa mga may prob sa first gear, share ko lang...mahirap ipasok sa 1st gear pag more than 10kph ang takbo pero pag 10kph and below ok naman pasok sa first gear...need po maipasok sa firat gear kahit di nakafull stop kasi bagiuo area ako and akyatan po lahat dito...may prob po sa gear pag di ka maka1st gear ng di nagfufulstop...wag po mun kayo akyat baguio ng di naayos ito hehe..di aya ng 2nd gear ang akyatan dito

Something to challenge your driving then??

Darn it.

[b_9904]

usually 2nd gear kaya naman, but have yet to try it sa baguio trip un ertiga... 1st gear is really for dead stop purposes so if ver u have a problem with "hanging"... think twice before going uphill at full load

Ngayon ko lang po narinig ito.

[butchoi_oOo_]

Ngayon ko lang po narinig ito.

which part, sorry if im generalizing too much
but sa baguio there are some instances wherein bitin ang buelo and i come to almost complete stop, first gear nako (diff auto (MB100 Van)

but if ok un takbo, 2nd gear is ok, i usally do a little zigzag para di ako mabitin

only time i go first gear kse is when the car is almost at a stop (ie mga 5kph below cguro)

- - - - - - - - - - - - - - - - - - - - - -

Ngayon ko lang po narinig ito.

which part, sorry if im generalizing too much
but sa baguio there are some instances wherein bitin ang buelo and i come to almost complete stop, first gear nako (diff auto (MB100 Van)

but if ok un takbo, 2nd gear is ok, i usally do a little zigzag para di ako mabitin

only time i go first gear kse is when the car is almost at a stop (ie mga 5kph below cguro)

[iceburn467]

^ glx lang yata ang may keyless entry..



Halimbawa pa-aurora hill, di kaya 2nd gear pag 4 passengers?

May nag send na ba ng feedback about this sa suzuki phils?

intersection bago akyat ng aurora hill so malamang mag full stop ka dun at mag 1st gear ka paakyat...kaya pwede mo ng maibwelo ito sa first gear then to 2nd para makaakyat....kayang kaya yun

[King_Louis]

sayang bro wala ka? 2nd thoughts sa membership? hehe
pics are at the members page kse... make a ertiga FB account nalang so you can join dun!

Off course not! Love to be there talaga. Kaso meron tayo work during that day. Nag-iimplement kasi kami ng new system (Information Technology work ko).

[bruce almighty]

saan makakabili ng dust trap na per yard, yung mura lang sana? galing na kami ace hardware moa at sucat puro 3M meron sila which is 1k+ per feet.

[ninjababez]

saan makakabili ng dust trap na per yard, yung mura lang sana? galing na kami ace hardware moa at sucat puro 3M meron sila which is 1k+ per feet.

kung ayaw mo dumayo sa banawe, meron sa ibang ace hardware yan or mchome depots
btw yun nakita ko sa mchome depot mas maganda quality dun sa murang version sa ace.

[Alen94Raj]

I agree with you on this post. Sorry if I made a mistake on emphasizing much on full stop. Actually I was coming from fast speed when I was approaching humps. Now I realized, shifting on 5km/h is so easy.

sa mga may prob sa first gear, share ko lang...mahirap ipasok sa 1st gear pag more than 10kph ang takbo pero pag 10kph and below ok naman pasok sa first gear...need po maipasok sa firat gear kahit di nakafull stop kasi bagiuo area ako and akyatan po lahat dito...may prob po sa gear pag di ka maka1st gear ng di nagfufulstop...wag po mun kayo akyat baguio ng di naayos ito hehe..di aya ng 2nd gear ang akyatan dito

[b_9904]

which part, sorry if im generalizing too much
but sa baguio there are some instances wherein bitin ang buelo and i come to almost complete stop, first gear nako (diff auto (MB100 Van)

but if ok un takbo, 2nd gear is ok, i usally do a little zigzag para di ako mabitin

only time i go first gear kse is when the car is almost at a stop (ie mga 5kph below cguro)

- - - - - - - - - - - - - - - - - - - - - -



which part, sorry if im generalizing too much
but sa baguio there are some instances wherein bitin ang buelo and i come to almost complete stop, first gear nako (diff auto (MB100 Van)

but if ok un takbo, 2nd gear is ok, i usally do a little zigzag para di ako mabitin

only time i go first gear kse is when the car is almost at a stop (ie mga 5kph below cguro)

Yung first gear ay pang full stop part. Clear na naman ngayon

Buti pwede i shift yung first gear pag below 10kph. Nightmare masyado yun if kelangan full stop talaga.

[maruti]

s del monte. 800 per yard. sulet. man 1.8k front nd rear. un 3rd row. bihira man use kyat un free mat lang cxa saken.

saan makakabili ng dust trap na per yard, yung mura lang sana? galing na kami ace hardware moa at sucat puro 3M meron sila which is 1k+ per feet.

- - - - - - - - - - - - - - - - - - - - - -

s del monte. 800 per yard. sulet. man 1.8k front nd rear. un 3rd row. bihira man use kyat un free mat lang cxa saken.

saan makakabili ng dust trap na per yard, yung mura lang sana? galing na kami ace hardware moa at sucat puro 3M meron sila which is 1k+ per feet.

[sp00nman]

kung ayaw mo dumayo sa banawe, meron sa ibang ace hardware yan or mchome depots
btw yun nakita ko sa mchome depot mas maganda quality dun sa murang version sa ace.

saan makakabili ng dust trap na per yard, yung mura lang sana? galing na kami ace hardware moa at sucat puro 3M meron sila which is 1k+ per feet.

sa Rob Handyman, P1199/yard, kakabili ko lang last Sunday at nakabit ko na din. 2 yards saktong-sakto lang pero would suggest na 3 yards mo na para me leeway ka. Sa trunk eh yung free na matting/rug na lang hindi naman sya inaapakan. me mas makapal for P1699 naman. Pre measured na kaya hindi pwede bumili ng medya yarda

[brandobandit]

bro, yung sa 1st gear malamang design talaga yun ng ertiga manual transmission. preventive mechanism ang pag full stop before shifting to 1st gear to avoid accidental use while in fast speed.

Ahh.. that makes sense. Di ko naisip yan... hehe

[Yehan_Yohan]

Mga bossing, tanong lang, keyless entry ba ang fresh from the factory na GL MT? Meaning walang add ons.
Thanks!

Capt, Keyless entry is default from GLX variant. you need to have adds on GL variant

[Yehan_Yohan]

bro, ang experience ko, fortunately hindi na ganun kahirap ang shifting pag paahon coming from 2nd gear. sa humps ko lang na- experience yung need pa mag full stop para lang maka shift sa 1st gear.[/QUOTE]

I agree on this. pg paahon madali lang mg shift from 2nd gear to 1st gear. I experience it nung umakyat me tagaytay coming from talisay, but I experience having a hard time pumasok pg 1st gear when Im above 10 km/h. sa 5 km/h ok naman like to others.

[roycearellano]

Sir napansin ko sa pic niyo na meron kayong cellphone holder na de--clip. saan banda niyo ito kinabit? thanks

Below the left aircon vent then passed thru behind the steering wheel.

[Yehan_Yohan]

salamat mga bro sa pag punta! congrats to all of us!

To all Ertiga owner, join Ertiga Club Phils

[captneo]

Capt, Keyless entry is default from GLX variant. you need to have adds on GL variant

Thanks, Yehan!
So far, Suzuki Dasma ang best deal. Baka sa kanila ko narin iclose. May under nego pa kami na freebies.
Magaling ang ahente at alam ang pasikot sikoy ng ssakyan.

May nakasabayan akong ertiga brown sa shell salawag kahapon na nagpahangin.

[sp00nman]

Q lang sa mga plastic parts ng Ertiga natin, para kasing nag stain na yung sa me harap na windshield sa lower driver's side pati yung sa bottom front grille ko. Yung parang nataliskan ng thinner or chlorine. Any suggestion to restore yung color black? Ni try ko yung pang interior na Microtex wa-epek eh.. TIA

[ninjababez]

Q lang sa mga plastic parts ng Ertiga natin, para kasing nag stain na yung sa me harap na windshield sa lower driver's side pati yung sa bottom front grille ko. Yung parang nataliskan ng thinner or chlorine. Any suggestion to restore yung color black? Ni try ko yung pang interior na Microtex wa-epek eh.. TIA

microtex tire black ginamit ko sa grill ko and plastic trims ko, ok naman at maganda kinalabasan. di sya wet look, pero di rin naman matt kumbaga na "restore" lang sya.

yung sa roof na rubber "divider" di ko mapaitim pero other rubber and platic trims naayos naman sa microtex tire black. wag mo gamitin yung silicone based na tire black (common transparent liquid) dahil masama daw sa rubber and paint yun

hth

[sp00nman]

microtex tire black ginamit ko sa grill ko and plastic trims ko, ok naman at maganda kinalabasan. di sya wet look, pero di rin naman matt kumbaga na "restore" lang sya.

yung sa roof na rubber "divider" di ko mapaitim pero other rubber and platic trims naayos naman sa microtex tire black. wag mo gamitin yung silicone based na tire black (common transparent liquid) dahil masama daw sa rubber and paint yun

hth

ok- thanks bossing