vulcanize 20 inch tires?

**bad driver** · January 19th, 2006 10:23 PM

hello,

ok lang ba ipavulcanize and 20 inch tires sa servitek or sa tabe-tabe? baka magasgas pag alis at kabet?

concern ko lang po eh ung special machine that is required to re-attach it?
or cguro dapat ung de-tusok lang no?

I also ran it flat for a short distance kaya gusto ko sana makita ang condition ng loob. thanks

**flakez** · January 19th, 2006 10:33 PM

alam ko mas safe ung automatic na pang tanggal at kabit. kasi pag ung manual(di-tusok), tusok lang sila ng tusok. hindi nila masigurado kung san tatama ung bakal nila. may nakasabay ako dati naka rechrome na mags. nagtatalsikan ung chrome kasi phro sablay ung nag tatanggal. hehehe

**bad driver** · January 19th, 2006 11:08 PM

thats my problem, baka ang servitek hindi equiped with a machine for a 20 incher... unlike wheels gallery. wala namang vulcanising ang wheels gallery

I'll have to settle for the "plug in" type of vulcanizing... whatever it's called.

M · January 20th, 2006 11:56 PM

Originally Posted by bad driver

thats my problem, baka ang servitek hindi equiped with a machine for a 20 incher... unlike wheels gallery. wala namang vulcanising ang wheels gallery

I'll have to settle for the "plug in" type of vulcanizing... whatever it's called.

i'd settle for the plug in type (yung may pinapasok na parang knife sa butas yan diba?) unless major yung repair na kailangan mo. bihira ang mga nakikita ko na equipped for 20+ inch rims. if you really want to remove the tires, better go to a reputable shop that can handle 20+ sizes.

mahal ng rims, sayang kung ma-damage lang.

**ssaloon** · January 20th, 2006 01:10 AM

ouch.... sayang naman yung gulong

**nugundam93** · January 20th, 2006 03:38 AM

i believe kaya naman ng machine nila ang 20" rims. or maybe put a rag in between para sure? :D

definitely wag sa mano-mano method. yari yang blings. :D

**IIE** · January 20th, 2006 10:37 AM

sir, kung gagawin sa servitek yan or kung san man, bantayan mo lang po or abisuhan mo na ingatan, sayang naman.

**ILuvDetailing** · January 21st, 2006 12:11 AM

kung pwede i-pa vulcanize mo sa servitek then pakabit mo wheel gallery...

**KCboy** · January 21st, 2006 12:13 AM

dnt go to cheap shops because ur tires n rims arent cheap. it's not worth it.

**seonadancing** · January 21st, 2006 01:49 AM

Sa Tyre Rack sa Santo Domingo gumagawa yata.

**aceshark** · January 21st, 2006 02:02 AM

Originally Posted by seonadancing

Sa Tyre Rack sa Santo Domingo gumagawa yata.

tyre rack ba yun or tireboy? correct me if i'm wrong...

**seonadancing** · January 21st, 2006 03:10 AM

tireboy nga yata.

**bad driver** · January 21st, 2006 03:54 AM

thanks guys... baka plug-in nalang ako kung walang machine

mahirap na. hehehe... sayang gulong ko. concrete nail

**scarab** · January 21st, 2006 04:41 AM

....ok na yang plug in type since pako lang naman nakadali eh (if its a fat bolt then id proly settle dun sa pinapatch from the inside), i dont think they'll plug in the tool deep enough para tamaan yung rim mo (unless super low profile goma mo).

**OTEP** · January 21st, 2006 06:24 PM

Ok naman plug in. Yung iba kong gulong na pinalgyan ng plug-in nung college, buhay pa din hanggang ngayon.

**bad driver** · January 22nd, 2006 11:33 PM

ahh thanks guys!

**youngbeezy** · January 24th, 2006 03:12 PM

Bro,

Just used plug in its better.... I used plug in on my 26"s

**flakez** · January 25th, 2006 02:19 AM

ngayon ko lang napansin... ung sinasabi palang di-tusok ni bad driver e ung plug-in type na vulcanize. ung sinasalpakan ng goma. kala ko ung di-tusok na pangtanggal ng gulong sa rims. bwahahahaha.

dapat nga ung plug-in na lang para sure.

The Largest Car Forum in the Philippines

vulcanize 20 inch tires?

Thread Tools

Search Thread

Display

Hybrid View