Synthetic Brake Gease. Saan meron?

**xtian119** · August 3rd, 2011 01:50 PM

In concorde megamall they sell Cyclo Silicon Grease for brake components. I a bit expensive I think but its much better than ordinary grease.

**crazy_boy** · August 3rd, 2011 02:33 PM

TS, nakahanap na ako ng synthetic lithium grease.

Top1 brand. meron nito sa DIY store. try to check at ace or handyman nalang.

**miked** · August 4th, 2011 12:37 PM

meself uses white lithium grease (sprayable)....3-in-1 brand.

**Ry_Tower** · August 4th, 2011 06:55 PM

Originally Posted by crazy_boy

TS, nakahanap na ako ng synthetic lithium grease.

Top1 brand. meron nito sa DIY store. try to check at ace or handyman nalang.

AFAIK available nga yansa mga autoshops. Maganda yan, I've been using that ever since I had a car.

**jmpet626** · August 5th, 2011 12:37 AM

Saw that grease sa mga autosupply. Read some article sa net hindi din advisable yung lithium grease dun sa rubber parts dapat talaga silicone based like yung permatex sa previous post.

**12vdc** · August 5th, 2011 01:14 AM

Ordinary grease lumalambot yung rubber or nag eexpand.. mahirap pumasok yung caliper slider pin kung nag expand na ang rubber..

I dont know if this would work pero im using this to repair motors and CV joints and bearings.. Pang heavy load and high temp din. Available sa bearing dealers.

Eto yung nakita ko sa Ace for grease gun. Usually ang available sa autosupply high temp grease like Whiz Loadmaster but designed for wheel hubs and bearings without the rubber parts.

**babkalakal** · August 5th, 2011 01:54 AM

share ko nadin. sa auto supply at servitek meron mobil grease. 200-220 per tube. synthetic na lithium din.

**Ry_Tower** · August 5th, 2011 10:06 AM

Originally Posted by babkalakal

share ko nadin. sa auto supply at servitek meron mobil grease. 200-220 per tube. synthetic na lithium din.

Mura yan, mahal yung sa wheel bearings ko eh, Wurth synthetic II grease, P480 per tube. http://www.wurth.co.uk/catalogue/pdfs/UK-CD_07_0245.pdf

Yung sa strada ko dati, after 4 years nabuksan uli yung front wheel bearings for re-tight ang ganda pa ng grease, parang dati pa rin. Ang layo sa mga nabibili lang sa gas stations na parang tunaw na isang taon pa lang.

**jmpet626** · August 7th, 2011 11:07 PM

Nagpa overhaul ako ng front calipers since namaga din yung piston rubber seal sa loob ng caliper. and yung OEM Caliper kit meron ng kasamang naka sachet na grease na kasama kaso konti lang.. Eto nga dapat yung grease na gamitin since bawal petroleum or lithium based grease dun sa . Pero oorder na din ako nung permatex online para in the future may stock ako gamitin.

**babkalakal** · August 8th, 2011 10:04 AM

Originally Posted by Ry_Tower

Mura yan, mahal yung sa wheel bearings ko eh, Wurth synthetic II grease, P480 per tube. http://www.wurth.co.uk/catalogue/pdfs/UK-CD_07_0245.pdf

Yung sa strada ko dati, after 4 years nabuksan uli yung front wheel bearings for re-tight ang ganda pa ng grease, parang dati pa rin. Ang layo sa mga nabibili lang sa gas stations na parang tunaw na isang taon pa lang.

ako nag palit din ng wheel bearing grease kasi sa civic approx. 2yrs old pa lang. pag nilagay sa drive may soft na "tok" sound pag may load na yun auto. May sugat pala yung axle boot pag tanggal ang sama na ng original na grease na nakalagay. malabnaw tulo nga agad tapos may pagka kulay yellow brown.