Results 11 to 20 of 23
-
-
Verified Tsikot Member
- Join Date
- Apr 2011
- Posts
- 13
July 9th, 2011 04:03 PM #12baka matawa ka sa name ng shop sir... PAYLESS Parts and Car Care Center sa Libis.
http://www.ppcbizgroup.com/payless.html
In fairness to them, mababait naman sila kausap.
Ang ayoko lang eh grabe ang tagal ng trabaho, pinasok ko ng wednesday kotse ko... wednesday next week ko rin nakuha. Tapos after ko makuha drive ako papuntang LTO dahil ipaparehistro ko then uwi ng bahay... kinagabihan... may tulo na naman! ayun back job! shocks! gumastos ako ng 15k tapos may tulo pa rin! binalik ko nanaman sa kanila (ang nakakainis pa eh yung abala ng pabalik-balik ka, pati tuloy sa work napapaabsent ako)
Observe ko ulit yung tsikot ko later kung tumutulo pa, i hope wala na. sakit sa bulsa at sa ulo eh.
-
Verified Tsikot Member
- Join Date
- Apr 2011
- Posts
- 13
July 12th, 2011 08:33 AM #13Update ko lang: waaaah! for the 2nd time, ibabalik ko nanaman sa kanila, "backjob" ulit. Mas grumabe pa yung tulo kesa nung hindi ko pa pinapayos sa kanila. Nung bago ko pinaayos, moist lang and pasulpot-sulpot na tulo, ngayon tumutulo na talaga. Hays...
Matapos akong mataga sa chroming may tulo pa rin, sakit naman sa ulo & bulsa nitong shop na ito.
-
July 15th, 2011 03:37 PM #14
anak ng baog.. grabe naman yang shop na yan! lakas ng loob man-taga, palpak naman trabaho! tsk tsk..
-
-
September 11th, 2011 11:28 AM #16
-
Verified Tsikot Member
- Join Date
- May 2016
- Posts
- 80
October 9th, 2016 08:40 PM #17
-
Tsikoteer
- Join Date
- Mar 2008
- Posts
- 52,701
October 9th, 2016 09:05 PM #18rechroming does not remove the "tamas", as far as i know.
re-machining may. but as this part is a precision part, i do not know if ordinary machining as we know it, is good enough.
probably not.
replacement is, in the long run, the more prudent choice, in my opinion.Last edited by dr. d; October 9th, 2016 at 09:15 PM.
-
Verified Tsikot Member
- Join Date
- May 2016
- Posts
- 80
October 9th, 2016 09:29 PM #19
-
Tsikoteer
- Join Date
- Mar 2008
- Posts
- 52,701
October 9th, 2016 09:36 PM #20
3M Color Stable series are all above 50% TSER. RFID readable through the tint, stays good for...
What's the best car tint brand and color?