Installing steering wheel cover

**bilog** · July 5th, 2006 10:24 PM

ang pagkakaalam ko may mga size din ang steering wheel cover...

**OTEP** · July 5th, 2006 11:41 PM

Tama ba ang size?

Masikip talaga yan. Otherwise it will not grip the wheel well (dangerous).

It helps kung dalawa kayo magkakabit. So one can hold down the parts you have installed already while you finish the rest of the job.

Tip lang, find the seam where the vinyl meets. Kadalasan yung edging lang naman ang may seam. Position the seam where you rarely put your hand. Yung sa Sentra inulit ko pa kasi yung seam nasa 3 'o clock position ko na ilagay, tama ng tama sa daliri ko. hehehe.

**1D4LV** · July 6th, 2006 12:12 PM

ang style dyan, isubo mo muna yung top part. tapos force ng bottom part.
tama si otep. talagang masikip yan for it to grip the steering wheel, otherwise, pag maluwag yan you will lose control while steering, specially on bends....

**puroy** · July 9th, 2006 06:46 PM

OT: may streering wheel cover ba for momo wheels? tia

**1D4LV** · July 10th, 2006 01:56 PM

Originally Posted by puroy

OT: may streering wheel cover ba for momo wheels? tia

afaik, yung mga usual na covers pwede yan sa momo wheels. standard din naman ang size ng most of them eh.

kaya lang, bakit mo naman kailangang i cover ang momo? kung medyo kupas na, ipa leather wrap mo na lang...

**yebo** · July 10th, 2006 02:32 PM

Originally Posted by happy_gilmore

ang style dyan, isubo mo muna yung
....

yan din gawa sa sauna, di mo alam may cover ka na pala ehehehehe!

**1D4LV** · July 10th, 2006 02:41 PM

Originally Posted by yebo

yan din gawa sa sauna, di mo alam may cover ka na pala ehehehehe!

ok ah...kabisadong-kabisado ah. bwehehehehe.

**BlueBimmer** · July 10th, 2006 02:42 PM

mas madali suotin ang medyas sa sauna

**Gumusut_Amige** · July 10th, 2006 02:57 PM

Originally Posted by happy_gilmore

tama si otep. talagang masikip yan for it to grip the steering wheel, otherwise, pag maluwag yan you will lose control while steering, specially on bends....

Agreed ako dito kasi pag mabigat manibela mo ay iikot sya.
Sa akin ginawa ko ay parang style O-ring installation ang procedure, paikot sya tapos force fit sa huli pero dapat may tanda kasi yung iba may pangalan sa sentro ng steering cover dahil mahirap ng ikutin pag nainstall na sya.

**puroy** · July 10th, 2006 06:34 PM

Originally Posted by happy_gilmore

afaik, yung mga usual na covers pwede yan sa momo wheels. standard din naman ang size ng most of them eh.

kaya lang, bakit mo naman kailangang i cover ang momo? kung medyo kupas na, ipa leather wrap mo na lang...

mahal sir ang pa-leather wrap eh. 1500 ata pinaka mura. parang isang wheel na rin yun sa mga ace hardware. tipid mode ako ngayon