Uneven wear on my rear tires.

[jon_espiritu]

Hello, hingi lang po ako ng advise and help. I noticed that my rear wheel wears uneven mas nauunang nauubos yung loob na part ng gulong kesa sa kabila. Kia Rio po yung oto ko at 2 years na sya 29000 na po yung mileage ng kotse. Anyone has the same experience? Please share naman po kung pano na ayos. Thanks.

[brainmafia_310]

Hello, hingi lang po ako ng advise and help. I noticed that my rear wheel wears uneven mas nauunang nauubos yung loob na part ng gulong kesa sa kabila. Kia Rio po yung oto ko at 2 years na sya 29000 na po yung mileage ng kotse. Anyone has the same experience? Please share naman po kung pano na ayos. Thanks.

back to CASA for free alignment or camber if it is still under warranty. if not, go to the nearest servitek they will be happy to assists you.

[falken]

back to CASA for free alignment or camber if it is still under warranty. if not, go to the nearest servitek they will be happy to assists you.

Rotate your tires after wheel alignment.

[Retz]

check also tyre pressure.

[wezz_zzew]

Stop patronizing Hella Flush.

Check your wheel alignments and always the tire pressure. First time having a car? Be OC, treat it like your mistress (if already have a wife) or a GF. Rotate your tires every now and then.

[oj88]

Most likely a toe misalignment. If the wear is on the inner tread, naka toe-out masyado (negative toe).

In the off chance that there's no adjustment for toe in the rear axles, check suspension bushings and hub bearing for play.

[foresterx]

Stop patronizing Hella Flush.

seriously? di pa din ba nawawala ang fad na yon? i just don't get why people deliberately destroy their perfectly good car.

[deafault]

Pa-align mo lang yan tsaka pa-rotate mo na rin tires. Wag sa zafra lol


o.t.

Usong-uso pa rin to



https://www.facebook.com/StanceNation

[radz15]

Same case sa ngayri sakin pero sa front tires. Nagtataka lang ako alaga naman sa alignment ever 10k km and laging 35psi kahit 26 lang ang required.

[yapoy86]

Same case sa ngayri sakin pero sa front tires. Nagtataka lang ako alaga naman sa alignment ever 10k km and laging 35psi kahit 26 lang ang required.

Try mo kaya nag 26psi kasi yun naman pala required eh. Pag nag pa align make sure na 3d alignment machine ang gamit at hindi yung laser type na wonder

- - - - - - - - - - - - - - - - - - - - - -

Same case sa ngayri sakin pero sa front tires. Nagtataka lang ako alaga naman sa alignment ever 10k km and laging 35psi kahit 26 lang ang required.

Try mo kaya nag 26psi kasi yun naman pala required eh. Pag nag pa align make sure na 3d alignment machine ang gamit at hindi yung laser type na wonder

[radz15]

Try mo kaya nag 26psi kasi yun naman pala required eh. Pag nag pa align make sure na 3d alignment machine ang gamit at hindi yung laser type na wonder

- - - - - - - - - - - - - - - - - - - - - -



Try mo kaya nag 26psi kasi yun naman pala required eh. Pag nag pa align make sure na 3d alignment machine ang gamit at hindi yung laser type na wonder

Nag aalangan ako kasi parang flat sya tignan. Pero ayon kay servitek based na pudpod na nakita nya under flated daw yung gulong. San ba may 3d alignment sir? Karamihan kasi laser type