Results 1 to 10 of 12
-
Verified Tsikot Member
- Join Date
- Jul 2006
- Posts
- 5
November 24th, 2006 05:46 PM #1hello po.. question lang po.. this happened kanina lang po..
I started my FD.. do a reverse but to my amazement.. nung mag-te-turn right ako... di ko sya maturn.. as in naka lock yung manobela.. nagtrapik tuloy... so tinulak yung FD sa side.. Pinatay ko then hugot yung key..start ulit.. nag ok na! ano yun?? any idea po? TIA.
-
November 24th, 2006 06:02 PM #2
Mechanical yan. have it checked asap! Baka mamaya habang nagddrive ka mangyari yan.
-
-
November 24th, 2006 08:01 PM #4
Mik: The new Civic.
Makul: You were able to START the vehicle and then the wheel still didn't turn?
At first I was thinking about the wheel lock, but since you were able to start the car, the wheel lock will be disengaged.
-
-
November 25th, 2006 11:57 AM #6
must be the EPS... bka nagka glitch lng..
pero d pa nanyari sa EPS ko yan
-
November 25th, 2006 01:19 PM #7
If it's a glitch, that could be a fatal one at that especially at high speeds. Have the ECU scanned or firmware upgraded (if ever may fix update na sila).
-
November 25th, 2006 01:25 PM #8
EPS shouldn't lock up like that.
probably the mechanical lock.
whatever it is it's a SERIOUS issue, potentially fatal...
you don't want driving around paranoid that it'll lock up anytime...
-
-
November 25th, 2006 07:30 PM #10
pretty serious problem. tama sila, have it checked immediately bro!
Where in throttle body is the adjustment the bizscew or on fix SAS
high idle RPM at engine start