TIRE NOISE DURING ACCELERATION - Chug, Chug, Chug

[wezz_zzew]

Anyone familiar with this noise on tire during acceleration? Chug,chug,chug,chug. Habang bumibilis, bumibilis din yung tunog tapos lalong lumalakas. Parang tunog ng dribol ng bola.
Ano kaya posibleng problema pag ganun. New suspension, new stabilizer, tire rotated. TIA.


Sent from my iPad using Tsikot Forums

[testament11]

^
Baka maluwag ang mga gulong mo? Ganyan din yun nangyari sa i10 ng workmate ko nung ni-test drive ko.

[jresperanza]

oblong or unbalanced na... have it check sa tire shop para sa balance check

[jodski]

idol daw ang bossing sa shoot chug chug chug dribble dribble hehehe :naughty2: j/k

BTT

second emotion to check wheel balance

[dr. d]

Anyone familiar with this noise on tire during acceleration? Chug,chug,chug,chug. Habang bumibilis, bumibilis din yung tunog tapos lalong lumalakas. Parang tunog ng dribol ng bola.
Ano kaya posibleng problema pag ganun. New suspension, new stabilizer, tire rotated. TIA.


Sent from my iPad using Tsikot Forums

malamang ay oblong na or "out of round". ideally, dapat palitan na. but kung kuripot ka tulad ko, ipagpalit mo ang rear tires with the front tires. or 'di kaya, gawin mong spare tire si oblong.

[greenlyt]

pag oblong ang gulong ramdam no na uneven yun ikot niya lalo na pag mabagal ang takbo

[lowslowbenz]

tire rotated.

Kung pina rotate mo yung mga gulong, chances are dapat nakita ng mechanic yan na oblong yung gulong mo.

Kung hindi nya nakita, aba ...... nakakaduda ang mechaniko na yan.

[greenlyt]

^
+ 1 on this
sinabihan ako dati ng mekaniko ko na oblong yun gulong ko... hindi ako naniwala kasi base on my visual inspection hindi naman
until lumala na yun pagka oblong and have to go back sa talyer and have him replace the oblong tire

[dr. d]

i was told, if you can't make the tire roll straight with your hand, that tire is out of round.

[K.I.L.L.]

I had a similar experience before. I checked my tyres and suspension and everything was ok. I decided to get a second opinion from another garage and it turns out that the culprit was the wheel bearing. I had it changed and the noise disappeared.

[wezz_zzew]

Nung pinacheck ko sa mekaniko ang sabi nya may problema daw yung gulong kaya ni rotate namin lahat pa X. Nung tinest drive, andun pa din yung tunog. Pag wheel bearing ba chug,chug ang tunog? Hindi ba parang whirring sound? Kakapalit lang ng suspension at stabilizer.



Sent from my iPad using Tsikot Forums

[Manilablock]

Ano manufacturing date ng gulong mo? Kahit makapal pa yan pero more than 3 years maingay na yan pag umiikot sa daan.

[wezz_zzew]

I'm not sure kung sa gulong ko ang may problema dahil narotate ko na pero nandun pa din yung noise. My two front tires are both Westlake (bought it 6 mos. ago) while Bridgestone naman sa likod. I'll have it checked na lang on saturday. Sabi din nga pala ng mekaniko, damaged na bushing ng rack and pinion ko. If ever, baka pa check ko na lang yun pati wheel bearings. I'll update everyone na lang pag naayos na. Thanks!


Sent from my iPad using Tsikot Forums

[dr. d]

I'm not sure kung sa gulong ko ang may problema dahil narotate ko na pero nandun pa din yung noise. My two front tires are both Westlake (bought it 6 mos. ago) while Bridgestone naman sa likod. I'll have it checked na lang on saturday. Sabi din nga pala ng mekaniko, damaged na bushing ng rack and pinion ko. If ever, baka pa check ko na lang yun pati wheel bearings. I'll update everyone na lang pag naayos na. Thanks!


Sent from my iPad using Tsikot Forums

is it possible, all your tires are out of round?
over-inflation is a popular way of getting premature tire failure (out of round).

[wezz_zzew]

Inform ko lang po everybody na ok na ung issue. The culprit, wheel bearing on the right side.

Damages:
Wheel bearing - 1k
Pressing - 250
Labor - 250
Tip - 50
Happiness - Priceless


Sent from my iPad using Tsikot Forums

[K.I.L.L.]

Inform ko lang po everybody na ok na ung issue. The culprit, wheel bearing on the right side.

Damages:
Wheel bearing - 1k
Pressing - 250
Labor - 250
Tip - 50
Happiness - Priceless


Sent from my iPad using Tsikot Forums

I knew it. I'm glad you got it fixed man.

[jocampo10]

mga sir, same problem encountered but mine is nag chug chug or parang dumadaan ka sa lubak pero naeencounter ko sya pag umaabot ng 2000 rpm pataas tas pag nag shift ako nawawala then babalik pag asa 2000 rpm na naman.. nagpalita na ako ng engine support pero meron pa din.. me nagsabi sa akin na wheel bearing yung iba naman camber allignment naman.. ano kaya problema??

[K.I.L.L.]

mga sir, same problem encountered but mine is nag chug chug or parang dumadaan ka sa lubak pero naeencounter ko sya pag umaabot ng 2000 rpm pataas tas pag nag shift ako nawawala then babalik pag asa 2000 rpm na naman.. nagpalita na ako ng engine support pero meron pa din.. me nagsabi sa akin na wheel bearing yung iba naman camber allignment naman.. ano kaya problema??

Mine was usually associated with speed and the noise would occur when I hit 40kph or when I was turning. As I would speed up, the noise would also go faster until I reached 8kph from where the noise would be fast enough to be just a big droning hum.

[s10pao]

Inform ko lang po everybody na ok na ung issue. The culprit, wheel bearing on the right side.

Damages:
Wheel bearing - 1k
Pressing - 250
Labor - 250
Tip - 50
Happiness - Priceless


Sent from my iPad using Tsikot Forums

san shop mo pinaayos?

[jocampo10]

Mine was usually associated with speed and the noise would occur when I hit 40kph or when I was turning. As I would speed up, the noise would also go faster until I reached 8kph from where the noise would be fast enough to be just a big droning hum.

ahh.. wala po bang vibration? yung parang nalulubak ka?