Brake Discs for reface?

[city]

Guys,

I had my exalta STA inspected by carguard in Alabang westgate due to vibration or scraping noise happening everytime i make a right turn. the owner suggested refacing the brake discs because it's already worn and uneven. Do you guyz recommend these?

Need you expert opinion...thanks in advance!


regards,

city

[ineedmorehp]

Ok lang basta nde pa manipis.

[SunTzu]

yep ok lang yan..

[v22]

yes ok lang yun.. as long as di masyado ninipis

[umzzzzz]

oks lang! first time refacing is good...
tapos replace shoes and pads para hindi masayang ang refacing. magiging ganun din kasi ang kayod sa refaced surface kung hindi mo papalitan. mas madaling magwe-wear.

[city]

thanks guyz!...is this a simple job ...i mean most shops do this?...medyo concern lang kasi ako baka hindi maayos ang pag-reface e....gusto ko yung pulido ang gawa...first time ko kasi sa carguard alabang...anyway, how about casa? nagrereface din sila?


regards,

city

[SunTzu]

thanks guyz!...is this a simple job ...i mean most shops do this?...medyo concern lang kasi ako baka hindi maayos ang pag-reface e....gusto ko yung pulido ang gawa...first time ko kasi sa carguard alabang...anyway, how about casa? nagrereface din sila?


regards,

city

tamang tama you're from the south...sa servitek ako nag papa reface. meron talaga silang machine for rotor refacing. kalimutan ko lang kung mag kano inabot.

[city]

thanks sun!


city

[umzzzzz]

600+each ata sa likod at 700+each sa harap...

[nugundam93]

reface na po yan.

and on the rotor itself, usually near the center, nakalagay dun the minimum safe thickness ng rotor. as long as it still goes above or equal that thickness after refacing, it's still okay. but personally, i'd rather have it above the min. thickness than exact min. thickness just for peace of mind.