TSCP Strada Mods [ARCHIVED]

[nanofossil]

share ko lang tong mods nitong gls sport na bago, ayaw mag pakilala eh! hehehe..[IMG][/IMG]

kilala ko yan, taga east yan. hehehehe. ganda.

[ThePatriarch]

share ko lang tong mods nitong gls sport na bago, ayaw mag pakilala eh! hehehe..[IMG][/IMG]

sabihin mo kay pauland, style nya bulok! wahahaha

[bluemica]

Ang pangit naman niyan! mukhang pang mahirap! hahahah

[bigtrak]

sabihin mo kay pauland, style nya bulok! wahahaha

sir how much yung ganyang bumper? thanks

[locoroco777]

Ang pangit naman niyan! mukhang pang mahirap! hahahah

sabihin mo kay pauland, style nya bulok! wahahaha

hahaha! nag papa blind item pa sya! haha!!

sir how much yung ganyang bumper? thanks

PM mo nalang si Bigblock sir...=D

[lord_cykb24]

nice one, wala ako masabi, mas sigurado kase kung kaw mismo ang gagawa sa ride mo, di pwede di sure yun gawa dahil kaw mismo ang gagamit....sa casa? haaaaaaay naku kakatakot papacheck mo pa ulit dapat para sure na binalik lahat yun tinanggal nila at mahigpit lahat yun bolt and nut na ginalaw nila......haaaaayyyyyy

manong wala akong talent sa mga ganyan I really relying sa mga taga-casa na yan so far ok pah, hehehehe.....

[GAIDEN]

hindi ko pa ata napopost yung mods ko since i joined the club, so here they are:


Roller Lid, Rollbar, Bedliner, Rear Bumper all by Carryboy (laki ng kinita nila sa akin ), and of course TSCP sticker



future mods:
Car alarm, Spare tire lock, Bagong shoes (haven't decided yet what to buy), Chrome door handles, Chrome side mirror covers w/ signal lights, and Front fog lamps

Same tayo ng mods sir! in terms of the lid, rollbar, at siyempre sticker. hehe. Just noticed one problem. Para sa akin big na ito. The roller lid assembly, which they put on top of the bedliner has caused scratches on the body. Not just scratches but deep ones, at tanggal talaga whole paint, exposing the metal.:shocked:




Thinking of bringing my ride back to carryboy. Tingin nyo mga sirs, maayos kaya nila to na maibabalik sa dati like nothing happened? Or mas okay na ipa-ayos or repaint na lang sa casa? Advise nyo naman ako sirs. hehe. Nakaka-stress!!!:mad2:

[pransis]

Same tayo ng mods sir! in terms of the lid, rollbar, at siyempre sticker. hehe. Just noticed one problem. Para sa akin big na ito. The roller lid assembly, which they put on top of the bedliner has caused scratches on the body. Not just scratches but deep ones, at tanggal talaga whole paint, exposing the metal.:shocked:




Thinking of bringing my ride back to carryboy. Tingin nyo mga sirs, maayos kaya nila to na maibabalik sa dati like nothing happened? Or mas okay na ipa-ayos or repaint na lang sa casa? Advise nyo naman ako sirs. hehe. Nakaka-stress!!!:mad2:

sir, san banda nagcause ng scratch yung carryboy roller lid mo? maybe you can post a picture kung san banda. based kasi dun sa current picture, di ko masabi kung saan yan banda e.

anyway, so far wala naman ako problema sa roller lid ko. well, except dun sa minor leak dun sa drain, which is i think e mareremedyohan naman. so far di pa naman nagcause ng gasgas sa body yung roller lid ng truck ko.

[GAIDEN]

sir, san banda nagcause ng scratch yung carryboy roller lid mo? maybe you can post a picture kung san banda. based kasi dun sa current picture, di ko masabi kung saan yan banda e.

anyway, so far wala naman ako problema sa roller lid ko. well, except dun sa minor leak dun sa drain, which is i think e mareremedyohan naman. so far di pa naman nagcause ng gasgas sa body yung roller lid ng truck ko.

Bale yan yung portion between the bed at yung area ng rear window. yung black ay yung pinakaharap ng top most part ng bed liner. Heto yung portion na yun:

[pransis]

Bale yan yung portion between the bed at yung area ng rear window. yung black ay yung pinakaharap ng top most part ng bed liner. Heto yung portion na yun:

ayun, kita ko na sir. hmmm. tingin ko dapat hindi didikit yung kahit anung part nung roller lid dun sa body ng truck mo sir. yung sa akin meron pang malaking space between the body and the part where the roller lid assembly was mounted. will post pictures later pag-uwi, wala sa akin ang sasakyan, nasa ate ko pa e

[ianmitsulancer]

sir, san banda nagcause ng scratch yung carryboy roller lid mo? maybe you can post a picture kung san banda. based kasi dun sa current picture, di ko masabi kung saan yan banda e.

anyway, so far wala naman ako problema sa roller lid ko. well, except dun sa minor leak dun sa drain, which is i think e mareremedyohan naman. so far di pa naman nagcause ng gasgas sa body yung roller lid ng truck ko.

this is my first time to hear about this issue. supposedly, the bedliner should be a perfect fit and is a standard equipment for the strada... if im not mistaken, this is installed either at the Batangas port or at the MMPC plant upon arrival from the Thailand.

---IMO---

here is my theory. the bedliner may have been pressed down further touching the base of the pickup bed due to the weight of the roller bar. this prompted the bedliner's edge to touch the double cab body with its rough edge- thus the scratch. IMO, this may have something to do with the pickup bed's alignment with the body. and example is Fellow Baguio BOSB Kraig_Ethan's 2007 GLX 4x4 bed was aligned towards the right or the the left making it look "tabinge" on closeup. my fingers cannot go in-between the bed and the double-cab unlike on the other side where it can fit in.

[blckrvntr]

Suddenly, now parang ayaw ko na ng roller lid. Haha...

[pransis]

Suddenly, now parang ayaw ko na ng roller lid. Haha...

chief, kung di ka na kampante sa roller lid, ok din ang top-up from miggyboy.

[GAIDEN]

this is my first time to hear about this issue. supposedly, the bedliner should be a perfect fit and is a standard equipment for the strada... if im not mistaken, this is installed either at the Batangas port or at the MMPC plant upon arrival from the Thailand.

---IMO---

here is my theory. the bedliner may have been pressed down further touching the base of the pickup bed due to the weight of the roller bar. this prompted the bedliner's edge to touch the double cab body with its rough edge- thus the scratch. IMO, this may have something to do with the pickup bed's alignment with the body. and example is Fellow Baguio BOSB Kraig_Ethan's 2007 GLX 4x4 bed was aligned towards the right or the the left making it look "tabinge" on closeup. my fingers cannot go in-between the bed and the double-cab unlike on the other side where it can fit in.

Sir Ian, pinatungan kasi yung top edge ng original bed liner ng additional layer na kung saan attached ung side railings ng lid. At yun yung tumatama. naaasar nga ako eh. 50k na accessory tapos ganun ang magiging effect sa major investment na pinakaingat-ingatan? Sana nga maayos ito na parang walang nangyari.

[GAIDEN]

ayun, kita ko na sir. hmmm. tingin ko dapat hindi didikit yung kahit anung part nung roller lid dun sa body ng truck mo sir. yung sa akin meron pang malaking space between the body and the part where the roller lid assembly was mounted. will post pictures later pag-uwi, wala sa akin ang sasakyan, nasa ate ko pa e

Nagtaka nga rin ako sir eh. kasi on a closer look, di naman siya naka-dikit. Though very obvious yung evidence na malalim na gasgas. kung ii-inspect din yung bed liner, mukhang rigid naman at fixed dahil nga din dun sa nakapatong na rollbar at yung lid mismo as additional weight. Yung body ba ng truck natin ay composed of 2 major parts na parang coupled together? i.e. 1st part is from the front to the back of the cab and the other one is from the front of the bed to the rear bumper? Just my thoughts..

[pransis]

Nagtaka nga rin ako sir eh. kasi on a closer look, di naman siya naka-dikit. Though very obvious yung evidence na malalim na gasgas. kung ii-inspect din yung bed liner, mukhang rigid naman at fixed dahil nga din dun sa nakapatong na rollbar at yung lid mismo as additional weight. Yung body ba ng truck natin ay composed of 2 major parts na parang coupled together? i.e. 1st part is from the front to the back of the cab and the other one is from the front of the bed to the rear bumper? Just my thoughts..

kita ko yung sa akin, nakadikit din yng assembly ng roller lid dun sa same spot ng sayo. di ko pa nakita kung may malalim na gasgas kasi madilim na saka black pa yung truck ko

ang nakakapagtaka e hindi naman sya nakadikit dun sa passenger side. hmmm. does that mean na hindi pantay yung kabit ng truck bed ng strada?:shocked:

[GAIDEN]

kita ko yung sa akin, nakadikit din yng assembly ng roller lid dun sa same spot ng sayo. di ko pa nakita kung may malalim na gasgas kasi madilim na saka black pa yung truck ko

ang nakakapagtaka e hindi naman sya nakadikit dun sa passenger side. hmmm. does that mean na hindi pantay yung kabit ng truck bed ng strada?:shocked:

Tingin ko yung tabas ng bed liner ang hindi pantay. on my case, di siya nakadikit on both sides but still may gasgas on both sides.

[martin2ez13]

actually if you guys havn't removed your bed liners you will notice that im sure almost all of us have body damages under the liners i had my car for almost a year now i decided to clean the body under the liner then found out that there are alot of scratches under it not light but deep that it already shows bare metal on it the liner came with the car so i never had the chance to have a look at it now i did alot of modifications on the car im not sure if it is still covered by the warranty so i decided to put closed cell foam between the body and the liner hope it wont do anymore damage to my truck just wanted to inform you guys

[lord_cykb24]

ayun, kita ko na sir. hmmm. tingin ko dapat hindi didikit yung kahit anung part nung roller lid dun sa body ng truck mo sir. yung sa akin meron pang malaking space between the body and the part where the roller lid assembly was mounted. will post pictures later pag-uwi, wala sa akin ang sasakyan, nasa ate ko pa e

sir pransis pogi yung rear bumper nyo pa fabricated din ho ba yan ng mga fabricators natin??

[av8or5]

actually if you guys havn't removed your bed liners you will notice that im sure almost all of us have body damages under the liners i had my car for almost a year now i decided to clean the body under the liner then found out that there are alot of scratches under it not light but deep that it already shows bare metal on it the liner came with the car so i never had the chance to have a look at it now i did alot of modifications on the car im not sure if it is still covered by the warranty so i decided to put closed cell foam between the body and the liner hope it wont do anymore damage to my truck just wanted to inform you guys

thanks for the input, good observation, we or at least I haven't seen the underside of the bed.

sir pransis pogi yung rear bumper nyo pa fabricated din ho ba yan ng mga fabricators natin??

i think his bumpers are from carryboy..its a carryboy design