TSCP Strada Mods [ARCHIVED]

[nanofossil]

Manolo and Manong, kaya ba itong design kong ito? May mga naghahanap ng ganitong klaseng bumper kaya i thought of designing one. Just modified the existing bumpers installed in stradas of some of our BOSBs.

[av8or5]

nano: wow..galing naman ...concept pa lang..ganda na

[kimospeed]

Manolo and Manong, kaya ba itong design kong ito? May mga naghahanap ng ganitong klaseng bumper kaya i thought of designing one. Just modified the existing bumpers installed in stradas of some of our BOSBs.

BANGIS! Hingi ka porsyento pag nagawa nila, i-patent mo yung design mo..... hihihi

[ianmitsulancer]

very nice, sir, this design uses the pre-existing licence plate slot from the cargo bed. you might want to consider a slot for the rear foglamps too... may i know what gauge of steel will be used? i hope it won't be too heavy so it wont eat up the payload... hehehe...

[tibod]

nano: nice one! galing! design mo nga rin ako 2 bedroom condo unit he he.

[nanofossil]

very nice, sir, this design uses the pre-existing licence plate slot from the cargo bed. you might want to consider a slot for the rear foglamps too... may i know what gauge of steel will be used? i hope it won't be too heavy so it wont eat up the payload... hehehe...

that is precisely why i designed it like that, several bosbs would like their steel bumpers with a step plate too. i have a design which has foglamps, di ko lang na post. i hope i hear from my idol go1 regarding this rear steel bumper of mine.

[G01]

that is precisely why i designed it like that, several bosbs would like their steel bumpers with a step plate too. i have a design which has foglamps, di ko lang na post. i hope i hear from my idol go1 regarding this rear steel bumper of mine.

Your design looks very nice, sir. Very similar to what I am planning to do. The difference is mine won't have the tubes on the sides as I think the tubes will make it look cheap. And instead of the hitch receiver my design will have the tow hook like the one installed on the Pajero.

[nanofossil]

nano: nice one! galing! design mo nga rin ako 2 bedroom condo unit he he.

kimo and av80r: thanks, di na kailangang i patent yan, discount na lang hehehe.

tibod: mukhang may malaki kang project ah. magpa bashplate ka na.

[nanofossil]

Your design looks very nice, sir. Very similar to what I am planning to do. The difference is mine won't have the tubes on the sides as I think the tubes will make it look cheap. And instead of the hitch receiver my design will have the tow hook like the one installed on the Pajero.

thank you sir go1. actually i was thinking of not using tubes on the side kaya lang tinamad na akong mag 3d ng side nya. i will take into consideration and will revise my design pag sinipag ako. ok din ang tow hook pero kung may step plate ako problema ang paglalagyan nito. i would like to see your design of your rear steel bumper. thanks again.

[nanofossil]

Your design looks very nice, sir. Very similar to what I am planning to do. The difference is mine won't have the tubes on the sides as I think the tubes will make it look cheap. And instead of the hitch receiver my design will have the tow hook like the one installed on the Pajero.

thank you sir go1. actually i was thinking of not using tubes on the side kaya lang tinamad na akong mag 3d ng side nya. i will take into consideration and will revise my design pag sinipag ako. ok din ang tow hook pero kung may step plate ako problema ang paglalagyan nito. i would like to see your design of your rear steel bumper. thanks again.

[G01]

thank you sir go1. actually i was thinking of not using tubes on the side kaya lang tinamad na akong mag 3d ng side nya. i will take into consideration and will revise my design pag sinipag ako. ok din ang tow hook pero kung may step plate ako problema ang paglalagyan nito. i would like to see your design of your rear steel bumper. thanks again.

OK naman, sir, yung tubes considering that it will make the bumper more sturdy. Kaya lang it will make your design similar to what everybody has already hehe. Yung step plate and yung location ng plate number din ang problema ko sa pag-install ng tow hook and I also don't want to sacrifice the departure angle by positioning it too low. Will try to figure out the best position pag hindi na ako busy with my work. Looking forward din to see the revised design ng steel bumper mo, sir.

[5dreamers]

Manolo and Manong, kaya ba itong design kong ito? May mga naghahanap ng ganitong klaseng bumper kaya i thought of designing one. Just modified the existing bumpers installed in stradas of some of our BOSBs.

i like!!!

[nanofossil]

OK naman, sir, yung tubes considering that it will make the bumper more sturdy. Kaya lang it will make your design similar to what everybody has already hehe. Yung step plate and yung location ng plate number din ang problema ko sa pag-install ng tow hook and I also don't want to sacrifice the departure angle by positioning it too low. Will try to figure out the best position pag hindi na ako busy with my work. Looking forward din to see the revised design ng steel bumper mo, sir.

tama ka sir go1, para maiba naman. over na ba, if you both have a tow hitch and a tow hook? i was thinking kasi of putting a tow hook on the location of the plate number and the tow hitch can also serve as the one holding the plate number. nakausli nga lang. hehehehe. parang baduy yata. basta will try to work on the revised design this holy week.

5dreamers, pa fabricate ka na. just expect a hefty price tag on it cause i think it is more difficult to make considering its design.

[5dreamers]

tama ka sir go1, para maiba naman. over na ba, if you both have a tow hitch and a tow hook? i was thinking kasi of putting a tow hook on the location of the plate number and the tow hitch can also serve as the one holding the plate number. nakausli nga lang. hehehehe. parang baduy yata. basta will try to work on the revised design this holy week.

5dreamers, pa fabricate ka na. just expect a hefty price tag on it cause i think it is more difficult to make considering its design.

sir nano, plywood na lang papagamit ko para makamura...

[nanofossil]

sir nano, plywood na lang papagamit ko para makamura...

ok yan, makakamura ka. eksakto at walang ginagawa ang karpintero ko ngayon.

[mdksael]

hahahahha sa sash factory yun ginagawa...wahahahahha pero mas makinis gumawa yun gumagawa ng ataul wahahahahha

[mdksael]

hehehehe ginawa ko ng bagong underwear si "azul" mukhang sawa na sya sa dati nya...





hehehehe di pa jan nai kabit ang sensor para jan sa two holes, hehehe di ko alam na ginawang parang star yun lalagyan ng sensor, pag balik ko tapos na..hahaha kaya di ko na pina ulit pwede na din yan. at least sa pasko me daladala na ako christmas lantern...yahoooo....

[nanofossil]

Revised rear steel bumper design.

[mr_incredible]

Revised rear steel bumper design.

Para sa ilaw ba yung nasa mga kanto or para sa reflectors? Kung para sa ilaw, parang masyadong sagad sa gilid, madaling matamaan ng kung ano o sino. Baka pag nasagi ng sidecar or ibang sasakyan, mabasag agad. Kung para sa reflector pwede na siguro although personally I would like it a little bit more towards the middle.

[bluemica]

Para sa ilaw ba yung nasa mga kanto or para sa reflectors? Kung para sa ilaw, parang masyadong sagad sa gilid, madaling matamaan ng kung ano o sino. Baka pag nasagi ng sidecar or ibang sasakyan, mabasag agad. Kung para sa reflector pwede na siguro although personally I would like it a little bit more towards the middle.

mali ka mr incredible, yung dalawang bilog ang back up censor! yan na ang uso ngayon gaplato na ang laki para mas safe at accurate