Results 971 to 980 of 5910
-
Verified Tsikot Member
- Join Date
- Jun 2005
- Posts
- 247
August 11th, 2005 12:25 PM #971uy! eh di ok pala tong SCLW kung ganon para sa puting ride ko! halatang halata at kapit na kapit kasi ang dumi at putik sa puti eh, lalo na sa lower portion ng doors. may standard side skirts kasi, dito nagiipon yang mga lint_k na duming yan! grrrrrr! washing may then be easier! sige, will try this sa next detailing ko, pero sabi nga ni ILD, thin coats lang. noted po mga gurus! TY!
-
-
Verified Tsikot Member
- Join Date
- Jun 2005
- Posts
- 247
August 11th, 2005 12:26 PM #973dehadista and vice, salamat po sa tip re rainhop! ok din pala price non. will check it out
-
August 11th, 2005 12:36 PM #974
stubby, don't apply it too thick, your wipers will skip if its applied to thick
-
Verified Tsikot Member
- Join Date
- Jun 2005
- Posts
- 247
August 11th, 2005 01:14 PM #975ILD, noted po, thanks for this pertinent tip on this wax. but how do you mean the wipers will skip? i dont apply any wax sa front windshield naman, kaya the wipers shouldnt be affected in any way.
-
August 12th, 2005 02:22 AM #976
alam ko po natanong na to dito pwede po makahingi ule ng advise di ko makita sa thread eh. ano po pantanggal ng stain at aspalto at iba pang tiny rough sand like material sa kotse lalo na sa lower portion ng body. grabe kahit kutkutin ng kuko hirap tanggalin, aspalto yata to kapag hinawakan mo kotse ko ang gaspang ng gilid grabeh. ano po maganda pantanggal how much chaka sa bumubili!!!! thanks!!!!
-
August 12th, 2005 02:28 AM #977
likot: subukan mo i-clay. Available ata sa Bigberts yung Mothers Clay Bar system, 750 ata.
-
August 12th, 2005 02:34 AM #978
sir nabasa ko na po pala sa mga thread nag search ako hehe!!! baka may latest kayo na pantanggal ng tar!!! 100% good ba ang wd40??? ang paint mo di ba kukupas???
-
August 12th, 2005 02:36 AM #979
Originally Posted by ILuvDetailing
-
Verified Tsikot Member
- Join Date
- Jun 2005
- Posts
- 247
August 12th, 2005 10:00 AM #980likot, madaming panggagamitan ang clay. if your main purpose is just to remove tar, i suggest bili ka na lang ng 3M bug and tar remover. around p260 yata sa mga ace or true value. wag na wag mo kutkutin bro, magagasgas pintura.
ILD sir, if you were referring to the clay bar system as the clay bar kit, p1200 yun. yung p750 is just the clay bar.
A 70/30 water to coolant mix may improve cooling efficiency but that's at the cost of less...
Coolant...