logitech g27

[170kphlang]

anyone owns one? i'm making a project driving simulator for gran turismo 6 complete with seats and was wondering if anyone can confirm if m/t yung logitech g27. the website says it is semi-automatic with paddle shifts and the people on datablitz couldn't give me a clear answer. sa pictures kasi it has a clutch and a 6 gear shifter. thanks.

Sent using Pera Padala

[CLAVEL3699]

Me too..gusto ko nga din for my kid.

Lagi kami sa mall for that only.

[CLAVEL3699]

-----double post-----

[Aljas]

I don't have one pero may demo unit sa silicon valley-sm north annex na napapaglaruan ko. May manual gear shift nga sya (5 forward and reverse, iirc. Sarap laruin at mukha namang matibay), at may paddle shifter din.

[jut703]

Yup meron. You can use it either as a sequential shifter (forward and backward lang yung motion tapos magrerebound to neutral) or as a 6-speed manual shifter.

On top of that pwede ring gamitin paddle shifters.

G27 nasa 11,500 nalang ngayon sa Gilmore.


Sent from my iPad using Tsikot Car Forums

[testament11]

I have one at gamit ko ngayon sa GT6. Well yes, full manual siya at pwede semi matic ala Maximum Tune style. Bought that noong 2010 nung kakalabas palang ng GT5 at 13k.

Jut, yun sinasabi mo sequential, G25 yun may ganung function. Sa G27, wala na yun sequential function which was hindi nagustuhan ng iba kasi rally style yun sequential function

Sent from my GT-N7100 using Tapatalk

[170kphlang]

I have one at gamit ko ngayon sa GT6. Well yes, full manual siya at pwede semi matic ala Maximum Tune style. Bought that noong 2010 nung kakalabas palang ng GT5 at 13k.

Jut, yun sinasabi mo sequential, G25 yun may ganung function. Sa G27, wala na yun sequential function which was hindi nagustuhan ng iba kasi rally style yun sequential function

Sent from my GT-N7100 using Tapatalk

salamat. so m/t nga siya. naghahanap nalang ako ng driver side bucket seat then ipapaweld ko yung lalagyanan ng manibela, foot pedals and the shifter on the lower right side.

[testament11]

This is my very, very crude setup. Pagpasensyahan na due to lack of budget :hihihi:

[170kphlang]

that's nice actually.mcgyver style :D sir sa tingin niyo mas sulit na kunin yung 19k racing seat sa datablitz or mas makakamura ako kung yung original plan ko gagawin ko?

Sent using Pera Padala

[170kphlang]

add ko lang. ano sir yung naghohold sa manibela at shifter? clamps ba yung nakikita ko?

Sent using Pera Padala

[testament11]

add ko lang. ano sir yung naghohold sa manibela at shifter? clamps ba yung nakikita ko?

Sent using Pera Padala

Oo clamps yun ng G27. Pero pwede mo siya i-bolt kasi may mounting holes siya. Kung sakali i-bolt mo, pwede naman alisin yun clamping

that's nice actually.mcgyver style :D sir sa tingin niyo mas sulit na kunin yung 19k racing seat sa datablitz or mas makakamura ako kung yung original plan ko gagawin ko?

Sent using Pera Padala

Kung bucket seats ang gagamitin mo, kahit reps lang, yun sa Datablitz nalang bibilhin ko para less sakit sa ulo. Kung ordinary seats lang o 2nd hand na bucket seats tapos ikaw magfafabricate, pwede na rin siguro. Kelangan lang naman kasi dyan eh mailagay yun railings nang maayos at pulido ang gawa.

Yan kasi sa akin, bumili lang ako ng computer table na tig 2k. Kung tutuusin, kahit yun pinaka-simple na computer table lang pwede na sa akin basta may mapapatungan lang yun G27

[renzo_d10]

that's nice actually.mcgyver style :D sir sa tingin niyo mas sulit na kunin yung 19k racing seat sa datablitz or mas makakamura ako kung yung original plan ko gagawin ko?

Sent using Pera Padala

Mahal naman 19k isang upuan? Reps nga na bride nasa 20k lang, pair na. Hehe.

Ano pa kaya 2nd hand na reps.

Sent from my GT-P7310 using Tapatalk 2

[170kphlang]

yun nga din iniisip ko sir renzo, namamahalan ako dun sa racing seat sa datablitz tapos wala pa sa lower right side yung lalagyanan ng shifter. kung magpapafabricate ako baka more or less 15k lang gastusin medyo matatagalan nga lang

Sent using Pera Padala

[jut703]

I have one at gamit ko ngayon sa GT6. Well yes, full manual siya at pwede semi matic ala Maximum Tune style. Bought that noong 2010 nung kakalabas palang ng GT5 at 13k.

Jut, yun sinasabi mo sequential, G25 yun may ganung function. Sa G27, wala na yun sequential function which was hindi nagustuhan ng iba kasi rally style yun sequential function

Sent from my GT-N7100 using Tapatalk

Ah wala na pala sa G27 yun. Thanks for the correction bro. Ako kasi naka-Logitech Momo lang. Pag may budget at oras saka na ko maguupgrade sa G27 hehe.

I tried it before though dun sa kakilala kong taga-TRS. Mas matibay ang pedals and yung machine na pang-FFB ng G-series kaysa lower end Logitechs like the Momo and Driving Force GT. Yung shifter though could be sturdier, para kasing bibigay pag maligalig ka magshift.


Sent from my iPad using Tsikot Car Forums

[testament11]

I tried it before though dun sa kakilala kong taga-TRS. Mas matibay ang pedals and yung machine na pang-FFB ng G-series kaysa lower end Logitechs like the Momo and Driving Force GT. Yung shifter though could be sturdier, para kasing bibigay pag maligalig ka magshift.


Sent from my iPad using Tsikot Car Forums

No worries.

Sa shifter niya, agree ako sa sinabi mo. Sana i-improve nila yun shifter kung maglalabas pa sila ng bagong steering controller

[SiRbossR]

Uyy okay na christmas gastos to ah

Sent from my GT-N8000 using Tsikot Forums Mobile App mobile app

[CLAVEL3699]

San pwede magpagawa nito? Tagal ko na gusto eto.

Mga magkano kaya magagastos lahat lahat

[170kphlang]

sir clavel sa may marcos highway at imelda ave. madami nagbebenta ng mga 2nd hand bucket seats(dunno if per piece or by pair) some in still good condition wash lang kailangan and some needs upholstery na. yung frame naman (was thinking like a ladder frame) pwede pasadya sa mga metal fabricating shops.

Sent using Pera Padala

[CLAVEL3699]

sir clavel sa may marcos highway at imelda ave. madami nagbebenta ng mga 2nd hand bucket seats(dunno if per piece or by pair) some in still good condition wash lang kailangan and some needs upholstery na. yung frame naman (was thinking like a ladder frame) pwede pasadya sa mga metal fabricating shops.

Sent using Pera Padala

Yep alam ko yan.

[testament11]

May mga nakita akong pegs kung paano i-fabricate online. Alam ko meron sa pinoyps niyan at may gumagawa niyan