New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 28
  1. Join Date
    Feb 2004
    Posts
    1,704
    #11
    as for the washer mod, i think the maximum that someone mentioned was 4 gi washers. i don't know how many psi that is. i i will start with 2 then test it then go to three then test for a day and then go to four siguro. i will borrow a boost guage to make sure i don't blow up my engine.

    andy

  2. Join Date
    Oct 2002
    Posts
    170
    #12
    The stock boost of the 4D56 Tdi engine is 10 psi, 2 washers would give around +1 psi or so, I have 4 washers installed. I think Pajerokid also has 4 washers so it would be around 12 psi more or less, I have boost guage and it reads 12psi at fullboost.

  3. Join Date
    Nov 2002
    Posts
    208
    #13
    just found out that my turbo is broken for my gen 2 pajero. Had it replaced surplus.

    Saan ba nabibili ito? Because I have to buy 2 kasi one for our gen 2 and gen 2.5.

    I hope it is not that expensive.

  4. Join Date
    Oct 2002
    Posts
    22,658
    #14
    A turbo is sevicable.

    Ano ang nasira? Bearings? Turbine? Housing?

    http://docotep.multiply.com/
    Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.

  5. Join Date
    Nov 2002
    Posts
    208
    #15
    tumagas yun langis and kumalat sa engine.

    According to the shop mas better daw surplus

  6. Join Date
    Feb 2004
    Posts
    1,704
    #16
    thanks yellow, i will be putting 4 washers soon and a boost guage as well. i hope to get 12 psi of boost as well.

    could you guys describe the replacement bolts that i have to buy?

    andy

  7. Join Date
    Feb 2004
    Posts
    136
    #17
    pwede rin ba sa 4m40 ang washer mod? 10psi din ba ang stock boost niya?

  8. Join Date
    Oct 2002
    Posts
    10,603
    #18
    Hindi pwede kasi walang wastegate actuator ang 4M40. (At least I cant find one )

    Noticeable na merong plugged up hole sa exhaust manifold ang 4M40. I dont know kung may kinalalaman ito....

  9. Join Date
    Feb 2004
    Posts
    1,704
    #19
    guys, any feedback on the size and length of the bolts I need to buy if i go to 4 washers?

    andy

  10. Join Date
    Oct 2002
    Posts
    1,977
    #20
    anong washers yan?? yung bakal po na may butas sa gitna? how will that be done? hehe... who has done it na po? howmuch po boost gauge? hehe... kung ganun.. sound like a very cheap mod ah.. hehe

Page 2 of 3 FirstFirst 123 LastLast
turbo timers and overboost??