Word has it that a pickup is one of the new vehicles Hyundai is going to launch this year. And I think Honda would never launch a pickup here since they wouldn't want to be associated with "utility".
As for the Colorado, I think chances of it getting here are slim since it is actually a rebadged D-Max. There is a Colorado clone by JAC though, but with the 4JB1 engine.
meron na bang pics?
ic, why not make another model for asia or phil market? chevy has a good reputation as far as truck is concern.As for the Colorado, I think chances of it getting here are slim since it is actually a rebadged D-Max. There is a Colorado clone by JAC though, but with the 4JB1 engine.
suzuki equator IS a nissan navara. rebadged, front clip redesigned, as well as different tailgate (wala yun plastic sa handle area). inside the interior is the same as any navara, in gray color nga lang.
...says a lot about suzuki's trust in the navara, don't you think?
Badge engineering on pickups
Isuzu DMAX = Chevy Colorado
Mazda BT50 = Ford Ranger
Nissan Navara = Suzuki Equator
Nissan Urvan e25 = Isuzu Como
Hi guys, Pick-up owner since 2002. Had a 2002 Ford Ranger Trekker that I recently replaced with a 2011 Ford Ranger Trekker.
Current pick-up
2011 Ford Ranger Trekker
Mods:
Carry boy aluminium step tube
Carry boy soft lid
AVT GPS (portable with car kit)
Custom fabricated light bar
Bosch all weather H4 bulbs
Bosch Europa horn
Bosch (pair) 8" Navigator lights converted to HID
Future mods:
replace rims with Rota Grid (white) same 16"
replace Bosch all weather to Philips x-treme power H4
upgrade speakers only
Picture during the 1st day I got it, behind is the 2002 Ranger it replaced:
Current look:
![]()
Pasali po mga pickup lovers! I own a FOTON Blizzard, base model lang po (4X2 NA).
Hirap sa pickup ko lahat ng puntahan ko walang kasukat na Aftermarket parts (rain Visor, Bed cover, bed liner, etc).
Kaya I need to be resourceful...
It's just a month old kaya wala pa ako kalikot na ginagawa, so far what I did is just put a leatherette seat cover (Chris J) and a customized two fold bed cover (Made of fiberglass). Ginagawa pa lang yung bed cover, I made the design (para mag fit sa needs ko).
Sana maganda kalabasan ng pagkakagawa ng fiberglass, Yung bandang gate nabubuksan ng 45 degrees supported ng hydraulic tube (tama ba), tapos pag kelangan na full open, tatanggalin lang yung hydraulic then lock sya sa half side ng cover. Will post a picture once it's done, baka may mga interested magpagawa.![]()