kamusta na kayo ? wla pa bang gathering ?
Every Truck owner should see this.
Has anyone read the new Ford book - Ford and the American Dream by Clifton Lambreth - www.thefordbook.com. This is a great story of what happened to the american auto industry.![]()
kamusta na ??? lets have an EB for pick up lovers na matutuloy !!! para maging buo na tong club natin
WOW!!!!
gaganda ng mga pickup nyo sirs!!!
kakaingit!!
Yun una ko pickup is a 1994 4X2 Mitsu L200. Naka turbo, stainless steel straight pipe, 15" mags at naka 235X75 na Bridgestone tyres.
Binenta ko yun para ipagdown sa 2001 Isuzu Fuego 4X3 A/T. Naka AMS 8.5in lapad na mags sya at naka 30X9.50X15 na Bridstone tyres. Naka Fine Filter foam air cleaner at naka 2 3/8 exhaust pipe with free flow muffler.Rancho 5000 shocks and body lifted 3inches. Simple lang interior mods nya, ala pa mp3 but with 12disc changer and active 100 watts subwoofer.
Heto pickup ko, kaya lang ayaw mag upload yata!!!
hi junvc! 4X3 ba talaga fuego mo? pareho tayong fuego ang pickup, 4X2 nga lang yung sa akin.![]()
hi there pick-up lovers. it's been a while since i last posted here. i have a problem with my mazda b2500...
i went to have my underchassis check coz there seems to be a noise coming from the wheel. the machanic found out that it was the wheel bearings which causes the noise when i speed up or slow down or making immediate turns.
lastly, i would appreciate if the quotation is reasonable...
1. labor
----- replace wheel bearing fittings: 660
----- camber align: 900 ( pag wheel align: 250 lang raw)
2. parts
----- 2 sets wheel bearing: 1,900
total: 3,460 if camber is included
regards,
carbuncle
Last edited by carbuncle; September 16th, 2007 at 11:39 PM. Reason: accidentally pressed back
hi there pick-up lovers. it's been a while since i last posted here. i have a problem with my mazda b2500...
i went to have my underchassis check coz there seems to be a noise coming from the wheel. the machanic found out that it was the wheel bearings which causes the noise when i speed up or slow down or making immediate turns.
now, i would appreciate if the quotation is reasonable...
1. labor:
carbuncle,
Mukang OK na yun presyo kasi meron ibang shop naman P850.00 ang camber correction so P50.00 lang diperensia. Puede ka rin mag canvass pa ng kalapit na mga shop kung within range yun kanyang singil. Pero pag malayo na at makarga ka pa ng P50.00 worth na diesel, jan ka na lang kasi patas na presyo nun.
What's important is reliable ba siyang repair shop? Kasi yun pickup natin mas mahal pa natin sa mga biyenan natin kaya TLC tayo sa kanila!! he he he....
sorry kung OT.
Question lang po sa mga pickup lovers & experts:
How easy is it to change the differential of a 4x2 pickup to an LSD? Where to you buy it kung available locally?
I'm planning to buy a pickup (maybe 2nd hand) and use it sometimes on dirt roads that get muddy during rains. This is not so frequent though and I don't think I need a 4x4. TIA.
Newbie here.
can some one pls tell me where I can have my pickup body lifted? store, location, and tel nos would be a big help po.
Godspeed!
di ko matangal black smoke sa pick up ko , kahit linisin ko na do i need a calibration na ba ? san ba ok ? tulong naman mga sir :D
Dalhin mo sa Betan Calibration ... sa may makati area near Bosch near the corner of Buendia and Ayala (malapit yun sa post office).
96 Strada ang akin, ang galing. Orig mitsubishi parts ba ang nabibili sa Atco, Taft.
buti pa kayo mga igan,at may pick up na kyo,ako dream pick up pa lang...... ISUZU D-MAX 4X4 hehehhe![]()