Pagero Gen 1 ..pano pwede set up sa body

**El Loco** · January 22nd, 2003 01:29 PM

we have recently purchase second hand Gen 1..
mar running board na kaya lang parang may kulang sa may 4 fenders..
anong tawag dun para mag mukhang malapad ang body? How much to purchase.?
what about bull bar? anong klase? and how much?
any other suggestions would be appreciated...
thsnks

**OTEP** · January 22nd, 2003 01:37 PM

Fender flares yung nasa fender. May available niyan sa mga Hyundai parts dealer. Yung pang-Galloper. Mapapamahal ka pa kung hahanap ka ng ng pang-Mitsu kasi sa end na ng product cycle niya lumabas ang flares and never offered sa Pilipinas ito).

Tanggalin mo yung running board at rear step, mas popogi iyan. Para maiba naman sa mga AUV.

A simple stainless steel A-Bar in front would look nice but it would hurt the excellent apporach angle (45 degrees is rare for a stock vehicle). My suggestion, lagyan mo na lang ng foglamps yung dalawang pre-drilled holes sa bumper. They're currently covered with round-head bolts.

**kimpOy** · January 22nd, 2003 01:45 PM

El Loco, keep it clean simple na lang, wag ka na mag bullbar, fender flare, chuchu blah blah, instead improve suspension na lang, new tires, chrome mags,

_________________
imho pa rin

**OTEP** · January 22nd, 2003 01:56 PM

Tama si kimpOy. Check out afrasay's GEN I in our respective photo albums (check the signatures).

31X10.5R15 A/T tires on 1996 OEM rims, at side door mouldings (yung generic sa Banawe) lang ang inilagay namin dati, eh. World of difference agad.

**Ungas** · January 22nd, 2003 02:07 PM

1st step: Check all the basic parts of the vehicle is running smoothly. Change any parts that you feel uneasy or that has limited running ability that will incapacitate your new ride.

2nd step: Assess your budget, if you want to have it interior detailed for better smell inside the vehicle.

3rd step: Ask yourself what you want to do with it. Is it for a sunday drive? Offroad vehicle? Everyday use as in pang-harabas?

4th step: For a sunday drive vehicle keep it simple and clean. Kung pang-harabas, keep the basic running parts in tip-top condition para di ka papalya sa gitna ng daan. For offroad use, aba marami kang kelangan gawin to have your ride suit your needs.

5th step: Keep your mind off from those unwanted car accessories that will just make your vehicle look like a ride from carnival or circus arena. :mrgreen:

IMO, kung pang occassional offroad din lang naman ang gamit mo nyan, don't bother to put those fender flares and step boards. Kung mapapansin mo sina OTEP, KCboy, pajerokid, afrasay, otomatic, & happiman. Nagtatanggalan sila ng parts instead of putting on. If your OEM bumper is damaged, better get the winch mounted bumpers with existing bullbars. Para may nakaabang ka na incase you want to add winch and auxiliary lights infront. From my experience, you may want to spend for your suspension set-up to achieve the attained vehicle height you want, then tires and/or mags. Tsaka na yung exterior accessories. :D

**OTEP** · January 22nd, 2003 02:16 PM

Ungas,

Sino ba naman ang hindi magtatanggal ng piyesa, eh mukhang kotse na yung Pajero kung hindi mo pa 'babawasan.' Kung daragdagan mo naman, baka pampasadang-FX ang lumabas.

Aaarrrghhh, hindi ko pa natatanggal rear stabilizer bar ko!

Yung tire cover removal hindi makalusot kay erpats. Gusto ko pa naman magsabit ng 'recovery gear' sa spare tire ko (shovel, hi-lift, etc.).

**Ungas** · January 22nd, 2003 02:30 PM

OTEP::: Nyahaha.. baka bigla kang parahin ng pasahero. :mrgreen:

Pwede naman siguro tanggalin yung cover pag offroad trip then kabit mo recovery gears. Then ibalik mo na lang after the trip. :D

IMO, pag tinaggal mo yung stabilizer bar, maninibago ka sa lakas ng wave when making turns. Better get a pin wherein it will be easier to pull it out during offroads then put it back on when your onroad again. :D

**bogart** · January 22nd, 2003 05:33 PM

Welcome!

The very first step is to put the very famous

[size=18]DieselClub.Org[/size] sticker :D

yun lang, dagdag 300 pogi points kaagad!

Tapos:
2 pcs Hella driving lights in front (yung bilog ha!)
Patatat na busina (Fiamm or Bosch)
Don't bother with the bullbar, pampa- bigat lang yon. (wala sanag mag-react :lol: )
dual a/c (i'm sure single a/c lang yan)
Gripo sa exhaust manifold (to lessen the usok)

isip pa ko ha? :wink:

**jay crew** · January 22nd, 2003 11:57 PM

ao eto yung gsto kong gawin dati sa gen 1 namin,
1. fender flares,yung di masyadong malapad
2.yung hood na may scoop
3. snorkel
4. mags
5. yung nilalagay sa gilid ng tail lights na color black
6.grille na mmc
7.orange na corner lamps

yan ang gsto kong idagdag dati pero la man lang akong nabili kahit isa,hehehe