yum yum!! 3.8litre V6!! woohoo! kso its kinda pricey... pwede pa yun sa escape and outlander... sana babaan nila yun pajero to around 1.8m pwede pa!3.8 l v6 5 spd a/t 2.350m
outlander
2.4l a/t 1.270m
escape
3l v6 a/t leather w moonroof 1.345m
yum yum!! 3.8litre V6!! woohoo! kso its kinda pricey... pwede pa yun sa escape and outlander... sana babaan nila yun pajero to around 1.8m pwede pa!3.8 l v6 5 spd a/t 2.350m
outlander
2.4l a/t 1.270m
escape
3l v6 a/t leather w moonroof 1.345m
http://www.motioncars.com/carchart/h...shi_pajero.htm
ayus hehe
benta ko na sarili ko para may pambili ahihihi :D :D :D
With those prices, our dreams of owning a brand new GEN III are finished. Oh well, time to put our attention back on our '46 Ford project. Hehehehe.
PK,
I don't think there is a PAMCOR anymore. Isn't it Mitsubishi Motors Philippines who assembles the vehicles nowadays?
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
Agreed OTEP.
Sa 2nd hand market nalang ito may chance maabot....
Say..... In about 2-3 years.....?
Oo nga no.Pero theyre basically the same company... i guess hehe.
BTW, bakit kaya sa motioncars.com 165hp lang yung 4M41? It should be 185hp.
http://www.motioncars.com/carchart/h...shi_pajero.htm
Guys, take a very very good look at the torque figure. You get 378NM * 2000 rpm! gademit! i want this engine in my rig!
So much for the "cheapened" Paje we were hoping for. The local release has all the bells and whistles! TRACTION CONTROL AND STABILITY CONTROL!!!
Haayy. benta ko na kaya kaluluwa ko?
Last edited by pajerokid; October 17th, 2003 at 12:11 AM.
If i had the cash, id get this over the expedition anytime! But then again thats just me.
besides, the erpats likes the new Prado over the V60/70 Paje. masyado raw "makorte" yung Pajero. hehehe. Okay na rin sakin yung LC120 Prado hehehe.
haaaay. nagdedeliryo na naman ako.
sa australia 172 hp yung 4m41 hehe... la lang :D
traction control is the only saving grace of the gen3 paj off-road, according to the Aussie off-road press
masyadong mahal na talaga pajero. cbu kaya mga unit kaya mas mahal? kasi kung dito assemble yan baka maka 20 units lang sila per month after a few months.
sabi sa motioncars di pa naman sure yung prices balita palang daw. bro ko galing mitsu otis wala pa daw pajero. sana mga 1.7 lang.
yes. for people who dont know, its basically integrated to the ABS and brakes a wheel that does not have traction. if i had one, i wont take the darn thing offroad! And why?
I can think of 2.45 million reasons.
Sana bumaba pa ang presyo... 2M+ from 1.5M+ is a big increase... Sayang ang mga plano... Hehe... :D
I feel you krscla....
Ako din dati gusto ko ng maganda na SUV, pero now it seems na sedan or pick-up ang mabibili ko.
pajerokid,
ahahaha... kengkoy ka talaga ser hehe :D
your mind says "NO!!!", but your heart says "4 LOW GO GO GO!!!" :D
okay na ko sa escape..badtrip lang bumaba presyo..nanghihinayang lang ako para sa 3.0 V6..huhuhu..35k lang diperensya.
hmm... from the mitsu thai site, the 3.2TDi 4m41 produces a max. of 121 Kw/4000 rpm which is equivalent to abt 162 hp... some mitsu sites even quote its power lower at about 158hp... the model we have here should probably produce power at this same hp range (158-162 hp)... the torque though is impressive at 372...
Gen3 Pajero - P2.45M
Let's compute:
P100/day - if I give up my smoking(P30) & drinking (3 bottles)
That's P3000/month, P36,000/year.
So if I would give up my vices, it would take me 70 & 1/2 years or on March 2074 to be exact, to finally own the Gen3.
Nahhh.
I'd be long dead before that....
Sige, maka-bili nga muna ng yosi. :D
mbt, pare when i marry a Zobel de Ayala, i'll get an LC100, then i'd have 5.3Million reasons not to go offroad hehehe![]()