HELP: I need a piece of scrap metal

**Sheep** · July 25th, 2003 11:30 PM

bali 18" lang po ha 1x1 angle bar? confirm ko lang

**Sheep** · July 25th, 2003 11:32 PM

ay bakit nabura post ko natira pwede pala yun aheheheh
ulitin ko po meron po ako dito bigay ko na lang po

dyan pa po kayo? yooohooo

**OTEP** · July 25th, 2003 11:41 PM

09167441180 po sir. Pwede po bang patingin sir? Hehehe. Kung hindi naman sana nakakahiya sa inyo ni Mrs. Sheep.

Kagagaling ko lang po sa kalye. 26" pala yung kailangan niya and mukhang 1.5" dapat. Meron po ba kayo nun sir? How much would it cost kaya?

**Sheep** · July 25th, 2003 11:42 PM

btw paano ilalagay yun sa bumper i didrill lang directly sa ibabaw? or iipitin sa loob?

**ARB** · July 25th, 2003 11:42 PM

hindi kaya ng 1x1" you need 1.5" na heavy duty or 2x2". will try to get a picture and send it to you na lang.

**Sheep** · July 25th, 2003 11:44 PM

no problem po sir otep meron ako dito dapat kasi gagamitin ko e di ko malaman kung paano mahaba naman po ito :P

**OTEP** · July 25th, 2003 11:52 PM

Yung isang side naka-rest sa face ng bumper held by the plate bolts. so bale yung isang side magiging perpendicular sa bumper. Yun po ang bubutasin for the foglamps.

Paint black ko na lang po siya or chrome.

Hella Comets lang naman po ang ilalagay. Hindi naman siya sobrang laki.

**ARB** · July 25th, 2003 11:57 PM

comet 500's. you make na lang a fiberglass na side bumper ala PIAA. may mga fiberglass versions and the they use hella comet 500's

**OTEP** · July 26th, 2003 12:01 AM

ARB,

Hindi po pwede sakin yung fiberglass side pods. I need the flex that the OEM plastic gives me kasi I usually hit the ground with them (lack of clearance).

Lalong papangit ang apporach angle ko if may lamp. Maganda kasi ang shape nila ngayon because they allow me to slide over stuff.

Yung ganyan ni kcboy basag agad kasisimula pa lang ng off-roading namin dito sa village. Lack of flex and lack of clearance kasi.

**ARB** · July 26th, 2003 12:05 AM

ah ok, better use na lang the angle bar. if you can fine 2x3" better you will have enough space for the back of the lights. will try to let wiretap_md get pictures of my lamp stay.