conduction sticker

**Ibaloi** · June 25th, 2003 06:33 AM

what's the purpose of that red sticker on new vehicles?

**20vanda01** · June 25th, 2003 08:21 AM

Kapag bagong labas ang car mo sa casa at wala pang plate, 'yong conduction sticker serves as the car identifier. I think the conduction sticker is good only for one week. 'Yung sa akin, when I got my plate number, I already removed by conduction sticker.

**RedHorse** · June 25th, 2003 10:33 AM

Bago na ang kulay and forma ng CS..

Its white, letters in black, with the manu's name printed too (i.e ford)

**HBOY** · June 25th, 2003 10:44 AM

hehehe. when my City was new... i had the CS on for over a year.... kahit na dumating na plaka ko pag coding nde ko kinakabit.. lusot!.. until nilabas nila yung Type Z... after that.. tinanggal ko na.. eheheh tapos ngayon.. wala na.. nabenta na last year.. ehehe:mrgreen:

**OTEP** · June 27th, 2003 12:16 PM

Tatlong buwan mahigit ata akong running around the Metro with only my conduction sticker sa Kia Besta. Tagal kasi ng plaka, eh.

Tapos ang hirap pa alisin nung CS, nagasgas ko ng konti windshield ko. Alam naman nilang temporary lang iyon, pagkadikit dikit na sticker pa talaga ginamit. Bwiset.

**happiman** · June 27th, 2003 01:01 PM

Originally posted by RedHorse
Bago na ang kulay and forma ng CS..

Its white, letters in black, with the manu's name printed too (i.e ford)

puti na nga yung CS ng bagong Pajero na kapalit ng xtc111.
medyo matagal ko na naman pakikinabangan ang sticker na yan laban sa color coding. pag labas ng bago kong car plate
na EUR 111 eh problema nanaman ang pag tangal ng CS :mad:

**Ungas** · June 27th, 2003 02:28 PM

Alam ko pwede ilipat ang Conduction Sticker sa may plate number area, para maiwasan ang gasgas sa windshield. Dahan dahan lang tatanggalin para di mabatak ang sticker. Or pwede isabay palipat sa casa bago bayaran ang bibilhing sasakyan.

**wildthing** · June 28th, 2003 06:59 AM

I just warmed up the sticker para magloosen ang glue nito when I removed it (naalis ka nga ng buo e). Used a trapo na soaked in very hot (near boiling) water and then covered the CS with the very warm and dripping trapo for abour 2-3 mins. Matapos mag loosen ang glue nito madali ng bakbakin.

**boybi** · June 28th, 2003 09:35 AM

meron ako na arbor na panglinis/pantanggal ng dumi sa windshield from one of the windshield crack repair shops. parang blade ito. ito yung ginagamit nila pangkuskos sa windshield bago nila i-treat. yan yung ginamit kong pangtanggal ng CS. unfortunately, nung huli kong ginamit pangtanggal ng registration sticker, nawala ko.