Capacity of trucks

[boybi]

Thanks sa pag sagot sa mga questions ko.

May additional question pa ako regarding sa wheels and tires naman.

Pag galing kasi ng Subic/Japan ang trucks, usually ang nakakabit na gulong is tubeless and either 17.5" or 22.5" diameter ang rims. Mas ok ba kung gawin kong 20" rims na lock type or mag tubeless na rin ako?

[jay2]

Thanks sa pag sagot sa mga questions ko.

May additional question pa ako regarding sa wheels and tires naman.

Pag galing kasi ng Subic/Japan ang trucks, usually ang nakakabit na gulong is tubeless and either 17.5" or 22.5" diameter ang rims. Mas ok ba kung gawin kong 20" rims na lock type or mag tubeless na rin ako?

For me mas gusto ko gamitin yung tubeless kasi hindi sya basta basta naflaflat kaya hindi ka madedengoy ng driver. Medyo mas matibay sya sa init ng gulong since mas malayo ang gap nya sa brake drum.
bad side is mas mahal ang tubeless at kung mabigat ang karga hindi din pwede ang tubeless sumasabog sa rim.

But if you decide na palitan mo give me a PM kunin ko sayo yung stock na tubeless rim and tires.

Jay
09176201887

[boybi]

Thanks for the offer. Pero Tarlac pa ako, baka malayo masyado from your place. Anyway, pwede naman swap yung rims to lock type, and yung mga goma, hindi na rin safe gamitin, kalbo na lahat.

Speaking of goma, which brand is the most bang for the buck? May natanungan ako, Goodyear, nasa less than 11K each for size 10.00x20. Ok na ba ito or mas ok kung mag 11.00x20?

[boybi]

Thanks for the offer. Pero Tarlac pa ako, baka malayo masyado from your place. Anyway, pwede naman swap yung rims to lock type, and yung mga goma, hindi na rin safe gamitin, kalbo na lahat.

Speaking of goma, which brand is the most bang for the buck? May natanungan ako, Goodyear, nasa less than 11K each for size 10.00x20. Ok na ba ito or mas ok kung mag 11.00x20?

[mitchy]

anung site pde mkakuha ng closed aluminum van 6 wheeler??? help me pls...hmmmm.. ung mejo bgo pa..

[napadpad_lang]

[SIZE=3]My mom bought a 10 wheeler truck for 450K, 2nd hand.. ngayon nasa talyer, sa tingin nio po reasonable yung price o naloko nanay ko? [/SIZE]

[boybi]

It depends on the model and the condition of the truck.

If you'll buy direct from Subic, a 10-wheeler dropside truck would cost around 1M up.

[napadpad_lang]

[SIZE=3]* boybi – yang sa subic po ba eh 2nd hand din , brand new or surplus? If not mistaken isuzu ata ung brand but I don’t know the rest of the details. Year 2000 pa ata yung truck, then my mom bought it this year..[/SIZE]

[debemus]

up ko lang, how about yung retooling? dadagan ng axle, meron ba nakakaalam kung san maganda magpagawa nito? bale yung 10 wheeler dumptruck eh magiging 14 wheeler, i read somewhere it cost 200k-300k.

[silicasandph]

this thread maybe old but i have question para sa mga truckers po sana, ano po ba meaning ng no truck ban?