New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 1 of 3 123 LastLast
Results 1 to 20 of 44
  1. Join Date
    Aug 2003
    Posts
    9,720
    #1
    what car would be ideal, if you're only after learning/teaching the basics of automotive repair/maintenance -- e.g. EFI troubleshooting, shocks replacement, etc? not necessarily for modding/racing purposes, just for DIY/learning.

    so far theff comes to mind:

    1. kia pride -- good and cheap, so are the parts
    2. nissan sentra B13 series -- parts should be no problem, but the car itself could be a bit pricey(considering that you're gonna tear it apart, put it back in, tear it apart again...)

  2. #2
    charade, wira, box sentra, singkit lancer?

  3. Join Date
    Oct 2002
    Posts
    29,354
    #3
    I think a Kia Pride is the best option. Very cheap to buy a used unit and parts are cheap and easy to find.

  4. #4
    nga pala, mazda 323/astina

  5. Join Date
    Jun 2004
    Posts
    103
    #5
    Quote Originally Posted by ghosthunter View Post
    I think a Kia Pride is the best option. Very cheap to buy a used unit and parts are cheap and easy to find.
    Yes, I second that. Very cheap parts you'd be pleasantly surprised. And lots of surplus parts out there. Also the engine is interchangeable with Mazda's 323.

  6. Join Date
    Oct 2002
    Posts
    796
    #6
    Quote Originally Posted by calcite View Post
    Yes, I second that. Very cheap parts you'd be pleasantly surprised. And lots of surplus parts out there. Also the engine is interchangeable with Mazda's 323.
    Mazda 323? Which one, the DOHC? That thing will fly!

  7. Join Date
    Oct 2002
    Posts
    2,286
    #7
    Quote Originally Posted by kupaloids View Post
    Mazda 323? Which one, the DOHC? That thing will fly!

    hehehe so you need to install some wings in it.....

  8. Join Date
    Oct 2002
    Posts
    29,354
    #8
    Quote Originally Posted by kupaloids View Post
    Mazda 323? Which one, the DOHC? That thing will fly!
    1600cc engine from the mazda 323. Can you say "pocket rocket"?

  9. Join Date
    Aug 2004
    Posts
    22,702
    #9
    The Pride is about as quick as an SiR with the right wheels and a 1.6.

    If you can find one of the rare 1.6 turbos, it would be downright dangerous.

    But it's a good project car if you want to teach/learn auto repair, and it's light enough so that such repairs would be easy to do in the backyard.

    Ang pagbalik ng comeback...

  10. Join Date
    Oct 2002
    Posts
    11,352
    #10
    how about a honda city with a B16?

  11. Join Date
    Oct 2002
    Posts
    29,354
    #11
    Quote Originally Posted by ssaloon View Post
    how about a honda city with a B16?
    it's been done with the 1st Gen Honda City and they also dropped the K20 engine into the current Honda Jazz.

  12. Join Date
    Mar 2006
    Posts
    19,003
    #12
    are the "newer" kia pride models equipped w/ efi already?

  13. Join Date
    Oct 2002
    Posts
    796
    #13
    Katakot yung City na may DOHC. As in Bolt on lang yung makina? No need for mounting fabrication? Hmmm... Interesting yun a! Dapat dun lagyan na ng parachute sa likot para huminto. :D

  14. Join Date
    Oct 2002
    Posts
    11,352
    #14
    Quote Originally Posted by ghosthunter View Post
    it's been done with the 1st Gen Honda City and they also dropped the K20 engine into the current Honda Jazz.
    yup, in thailand, they even dropped in a freakin 4G63T in a 1st gen city!

  15. Join Date
    Aug 2005
    Posts
    2,063
    #15
    kia vote ko

    OT:4age black top

  16. Join Date
    Nov 2005
    Posts
    827
    #16
    Quote Originally Posted by badkuk View Post
    2. nissan sentra B13 series -- parts should be no problem, but the car itself could be a bit pricey(considering that you're gonna tear it apart, put it back in, tear it apart again...)
    Our B13 Sentra became our project car within the first 6months, whether we wanted it to b or not. We replaced pretty much everything in the engine bay, alternator, the a/c parts, iac? (that air controller thing)..our battery, the fuel pump, starter, fuel lines, the wiring for our headlights, we still have an alternator whine when we turn on the radio, now the front right suspension is bad n its affecting our headlights which sometimes turn off n on at night..the connection keeps coming loose..ppl think im doing it on purpose. We also replaced our exhaust pipe n muffler, before our car used to sound like an airplane..ppl knew we were near their house because they can hear my car..now its quieter. There's other things..but i cant remember it all.

    So now if our car breaks down, we know what part is NOT at fault..because we're running out of things to replace n fix.

    i'd also say a b13 sentra..because it's not ugly..but its also not a Nice looking car that's appealing to the eye, but, it has potential. If we decide to sell our Sentra when we get our Isuzu... i'll let u guys know..n u can have my car from hell haha.

  17. Join Date
    Jun 2004
    Posts
    103
    #17
    Quote Originally Posted by kupaloids View Post
    Mazda 323? Which one, the DOHC? That thing will fly!

    Yes, I read that some Kia owners convert to the Mazda B6 (1600DOHC) engines. They claim their cars literally fly.

  18. #18
    hay, pangulat, charade na may 4age blacktop/ 4agze...kung kasya

    kung pwede pa lagyan ng turbo yun 4agze, masmasaya!

  19. Join Date
    Nov 2005
    Posts
    331
    #19
    Here is Mr Jr's project KIA Car.
    http://www.cardomain.com/id/KIADOHC

    KIA w/ Mazda Engines - Mga BPT, BP, etc.

  20. Join Date
    Mar 2006
    Posts
    1,339
    #20
    Meron dati sa libis kulay white na charade wid no fenders sumisibak ng sir! nung tinanong namin kung ano engine sabi nung may ari samin sr20 turbo daw !

Page 1 of 3 123 LastLast
good project cars(not for racing)