Car won't let me in...

**finchy18** · January 11th, 2006 01:02 PM

spray WD40 or just lubricate it with grease... minsan kasi pag tumotunog nayun door pag open or minsan pinabaya.an nlang.. =] gaya ng sabi nila eh lubricate pra pumasok.

hi umzzz.. hehehe! problem na nman?

**XTO** · January 11th, 2006 01:16 PM

Originally Posted by umzzzzz

yesterday the door of my ride is stuck...but today, it worked. after inspection (by removing the upholstery)...it seems na matigas yung rod na connected sa lock tab at locking assembly. i suspect that it's the locking assembly since hindi naman nabangga ang door na yun para ma-misalign yung rod. it happens intermittently.
(hay gastos nanaman...tsk!)

kwistyun:

is the locking assembly repairable? where can i find a locking assembly besides casa (mahal dun e)...if ever sira na nga...

tingkyu por da riplay.

spray wd40 to loosen up. me nanigas lang dyan prob. kalawang.

**dynamo1131** · January 11th, 2006 03:58 PM

Originally Posted by afrasay

...won't let me in, lubricate, himas. hmmmm...looks like we're going somewhere here ;)

ha ha ha ayos!!!

**jayelgee** · January 12th, 2006 12:20 PM

Originally Posted by afrasay

...won't let me in, lubricate, himas. hmmmm...looks like we're going somewhere here ;)

kasi dapat in order....himas muna, tapos lubricate, tapos pasok...sigurado labas-pasok ka na niyan pagkatapos! heheh

**jayelgee** · January 12th, 2006 12:24 PM

Originally Posted by xto

spray wd40 to loosen up. me nanigas lang dyan prob. kalawang.

tama rin naman yung order...naningas, hinimas, nilubricate, nakapasok...labas-pasok na ulit....sa kotse ha!

**box_type** · January 12th, 2006 03:00 PM

hahaha...ang kulit ng thread na to!

**afrasay** · January 13th, 2006 01:56 PM

ok guys, let's put order in this thread baka magalit ang mods natin (kimpoy)..hehehe

pag grease ang lalagay ninyo don't spray WD40. it will negate whatever properties the grease have. IMO, grease will last longer though really messy when doing repairs. apply grease then apply a little up and down motion until locks operates smoothly.

**afrasay** · January 13th, 2006 02:05 PM

ok guys, let's put order in this thread baka magalit ang mods natin (kimpoy)..hehehe

pag grease ang lalagay ninyo don't spray WD40. it will negate whatever properties the grease have. IMO, grease will last longer though really messy when doing repairs. apply grease then apply a little up and down motion until locks operates smoothly.