some waxes add more protective layers, as they are applied.
some car shine products (some "simoniz" products, rubbing compound, and other similar abrasive products) sand away the dulled, less shine-y superficial layer of your car's finish, to bring out the mas matingkad na paint underneath it. after so many applications thru the years, unti-unti nang lumalabas ang grey factory rustproofing paint underneath.
No one answered and I'm interested to know exactly what is the difference. This is what I found:
How Coating Your Car Makes A Difference In The Long Run
What's the difference between the two?
According to this car-detailer, the difference lies in the process of putting on the coat. A ceramic coating process requires heating, while glass coating bonds to the car's paint immediately upon application.
Dina uso Yan mas macho sasakyan Kung puro putik [emoji6]
Sent from my POCOPHONE F1 using Tapatalk
Had mine ceramic coated usung Gtechniq also and after a month dami na agad swirlmarks and tiny hair lines although its not scratch proof pero I’m quite disappointed lang kahit after ma coat eh hindi naman nawala ang swirlmarks. Madali lang linisin ang kotse due to added coating. But I will see after my reboost after 6 months kung ano gagawin nila.
Sent from my iPhone using Tapatalk
The ceramic coating isn't scratch proof talaga, kaya need parin ng proper car wash. Proper meaning 2 bucket method, using microfibers, etc. If sinabi sa inyo ng nag coat na di na need hugasan, then I think they are not a good shop kasi parang false advertising eh. Mas madali linisin ang car kasi hydrophobic but that doesnt mean di na lilinisn ng maayos.
kung after ma-coat ay may swirlmarks? ibig sabihin hindi maganda pagka-polish o prepped ng paint surface ng sasakyan mo bago inapplayan ng coating. ignore mo na lang mga deep scratches pero swirlmarks hindi man lang natanggal?[emoji849][emoji107] wala ako bilib sa detailing shop na ganyan, they offer coating kuno pero yung pinaka-basic na requirement prior to application ng coating eh hindi nga magawa ng maayos. tapos tatapalan ng coating yung scratches[emoji24] mag wax at sealant na lang ako[emoji2960]
Sent from my SM-G960F using Tapatalk
I think what he menat was nagpa ceramic coating siya tapos nagka swirl marks ma after a month, not necessarily hindi na detail ng maayos. hehe.
Pero to carwhacko, were there swirlmarks already right after the ceramic coating? Kasi if meron, then blacklist that shop, tamad yung ganung gawa.
*ironman ans *monty gtv,
Yes mga brothers right after the ceramic coating procedure napaka visible parin ng swirlmarks. I advised them sa observation ko bakit ganun. Sabi nila eh baka daw matanggal ang clear coat. Pero nung sinukat ng isang shop dito mataas pa daw % ng clear coat ko. And so yes hindi maganda ang preparation nila. Lagi parin sinasabi na hindi nga daw scratchproof etc. Sabi ko alam ko naman yon, and alam ko kung paano maglinis ng kotse. Hindi ko na nga ito pinapacarwash sa labas after the coating eh. Ibabalik ko nalang after 6 months sa free reboost ko. I guess puro ganun na lang gagawin yung reboost. Yun rin advise sakin na we will see on my 6th month. Haay! By the way the name of the shop is Primo Autoshine here in Molino, Bacoor.
Sent from my iPhone using Tapatalk
mine was also Gtechniq (by optimum impressions) pero walang free reboost every 6 months
yearly check-up lang meron, nag email din Gtechniq website na schedule na ng check-up.
ako na lang nag aapply ng c2v3 every 3-4months.
Buti nalang nabasa ko tong thread na to. Out na yang mga coating chenes na yan.
Car wash, at turtle wax lang ako. tapos armour all sa loob.
obvious na hindi marunong ng paint correction yung pinagpagawan mo sir. ang babaw lang ng swirlmarks to worry about the clear coat. saka why worry eh papalitan mo nga rin ng ceramic coating[emoji23] then yung reboost nila, kahit ilang reboost pa yan eh papatungan din naman yung dating paint defect[emoji1787] i'm not convince sa pinagpagawan mo sir, seems like hindi professional detailer.
i have no experience sa kanila but looking at sa mga gawa nila, they know what they are doing.
maganda rin naman magpa-coating sir, may advantage din sa old fashion wash and wax. depende lang kung marunong yung shop na gagawa. key talaga is yung prepping o paint defect removal bago i-apply yung coating. check out yung mga gawa ng optimum impressions at technical details, baka magbago isip mo[emoji2960]
Sent from my SM-G960F using Tapatalk