Rims & tires for Strada?

[tekgik]

Originally posted by kimpOy
torsion bar is at the front so no problem whem loading.

what noteworthy is saying is, is you strada the 4x2 endeavor or the 4x4 strada.

my strada is a 99 model generation 1 "Boxed type"

check out my shackles here
http://www.pbase.com/kimpoy316/my_ride


"compromise is the real issue here
if you opted for 33 or 32 swampers get ready for a harse ride
and a dirty ride as well, unless you have those fender extensions."

yikes... bumpy ride! I think il do the torsion mod, its cheap and can revert from the orig specs.

My strada is like the current stradas right now 2nd gen.

Nice ride u got there kimpoy! AR ba yung rims mo? ganda ah! naka 32" kaba?

thanks

[OTEP]

I don't think durability will be compromised in any way if the lift is moderate (1"-1.5"). Usually kapag sumobra ng crank may tendency mag-wear out ang front CV joints and CV joint boots.

I recommend hacking the upper bumpstop to soften the ride.

[kimpOy]

yup naka AR ako dati, but sold them so nikko
my mags now is like the 2ng gen strada yung 5 spoke.

[ekc542000]

sir tekgik,sa nasipit kami,cembrano parang narinig ko na yun,....

[jay crew]

tekgik awc lang mags ko balak ko gawing flat black pero di ko alam kung bagay,behela na,yung gulong stock lang yun la pa pera,hehehe

[Supierreman]

tekgik,
my bro has the same ride as yours. sagwa nung stock na mags no? yung parang may plato na center cap.

My bro got the 2k3 Mags yung 16" 6spoke ata. he was supposed to get the Pajero 16" Ralliart mags pero nagbago isip nya. Mas maganda nga yung 2k3 mags mas rugged dating. He now has 275/70-16 tires stock height.