I bought my ride at Autotechnica along commonwealth avenue in fairview qc last weekend to avail some of their promo, free alignment, brake and suspension check. Kinunsulta ko na rin yung problema ko sa steering. Medyo out-of-control kasi ang steering when I'm running above 80kph, nakatakot, there is too much play on steering wheel and you can feel this even when engine is shut-off, Ok naman ang preload ng gear box at walang naman problema sa mga bushing, tie rods and pitman arm etc. They traced my problem on loose/play of the "joint assembly" this is the link between the steering column and gearbox. It looks like a tube with axle on both ends at medyo malaki nga ang play ng tube from the axle when you rotate the tube with your hand.
Kailangan daw ibaba ang buong steering assembly to diagnose kung may ibang problema. The joint assembly cost 10.3K sa eldorado.
Is somebody experience replacing this part?
Ok lang kaya na bumiling ng surplus joint assembly sa banawe o sa pampanga. Advise naman po.




Reply With Quote
