pajero parts supply

**dabar** · August 17th, 2005 09:13 AM

pajero bros.,
can anyone give me name and telephone numbers of auto supply with complete underchassis parts to give me an idea for my budget especially in banawe and rotonda. I was planning for complete repair pero mas mahal tiyak kung sa underchassis specialist and piyesa. May servitek din ba sa banawe? thanks for posting.

**KCboy** · August 17th, 2005 10:02 AM

try mo eldorado o motorix for orig under chasis parts, am sure prople will post here latyer. with regards to replacement, 555 is ok, sa banawe dami din, if u want u can go n see motorcraft for a free estimate. ayaw ko a pagawa sa servitec, puro alok ng sideline n mahal sila.

**dabar** · August 17th, 2005 05:02 PM

Hi KC Boy, thanks for quick replay. I hope that we can have a directory for auto supply especially for replacement parts para isang tawag ka lang at alam mo na. magkano kaya complete underchassi replacement sa motorcraft pangharap.Layu naman kasi sa sanpedro tapos ayaw magestimate sa telepono, nakaksama lang ng loob pag dating mo kulang pala pera mo.

**v22** · August 17th, 2005 06:15 PM

try mo din pa-estimate kay ZEE kung repair lang.. then compare with the cost of having replacements...

had zee do my pajero's underchassis, its still rock solid.

**OTEP** · August 17th, 2005 10:42 PM

Check out the workshop. Daming recommended na shops dun. If you want to save, try ZEE because they can refurbish suspensions using their proprietary polymer injection process. If you really want to put in new parts, you can go to Class-A Mastercraft or Wheelers in Banawe. Parts are available in Banawe. Mit Parts near Gloria Maris is usually my parts source.

Hindi ako satisfied sa mga Serviteks. Most are just riding on the name recall of their franchise but the work is so-so.

**KCboy** · August 18th, 2005 07:26 AM

had all my front suspension replace sa motorcraft inabot ng mga 8k, d kasama shocks ha. thatw as after an offroad race sa porac pampanga.

**dabar** · August 18th, 2005 02:25 PM

Salamat mga peeps sa input nyo, what i did is bumili ako Atco dalawang upper ball joint P550ea., dalawang lower ball joint P850ea., dalawang outer tie rod P450ea. inner tie rod end P550 ea. saka ko pinapalitan sa tie rod man cost 2k kasama alignment lang. para sa lahat ng naka box type yan po presyo ng 555 then idler arm is P1,300 and pitman arm is around P950, fromt suspension bushing is around P220 each.For other parts call ATCO tel.831-4177/8316365/8317321/8330859. I hope this could help you all also.Many thanks to all.