Pajero GenII: DIY change of Fuel Filters

[AC]

sir/ ma`am when po magpapalit ng fuel filter? san ba mura bumili ng ganito... i want to buy vic brand sana... model FC-123.. hehe.. for 4d56 engine... kaya ko po ba i-DIY change ng fuel filter? pano po ito? tangal kabit lang o... lagyan ko pa ng konting fuel sa labi tulad ng sa oil filter... san po ba ito nakakabit sa pajero gen2? ndi ko masyado alam eh.. tnx po

[afrasay]

Sa gen1 ko, pull out (loosen screw first) in and out hose. disconnect the water indicator wire. remove the filter and the pump (primer), unscrew the filter and the separator (sa ilalim ng filter ito). replace with a new one. after assembly (water separator, mounting, water indicator, hose and all) it is important the you pump fuel by pressing on the top of the filter. may bleed screw to let the air out. loosen this while keeping your hand press against the primer (parang sa brakes). pag matigas na ang pag bomba and wala ng hangin ok na yan . good luck.

[AC]

ok tnx... try ko yun.. but.. mukhang ndi ko magegets.. hehe.. ndi ko kasi alm kung nasan po yun.. hehe.. mahina po ako sa technical stuff sa makina eh.. heheh tnx po anyways.. tingnan ko makina and...try ko sundan instructions

[Ungas]

Mas makakasiguro ka pa kung pagawa mo sa mga service stations, tignan mo muna at pag aralan kung paano. Tsaka ka na mag experiment if you know the names of the parts involved.

But before you head to your service station, you can buy the fuel filter first at your suking sari-sari store... auto supply pala. 4D56 parts are so abundant, who knows? Baka nga meron?

[AC]

onga... mukhang may pagka complicated nga.. hehe.. i guess.. pa service ko nalang muna hehe.. tnx po uli sir afrasay and sir ungas

[pajerokid]

Actually its quite easy. The hard part lang is to loosen the filter itself from where it attaches. You need a vise or an oil filter wrench. i did this myself last year. but kung ngayon, pagagawa ko na lang.

[OTEP]

Ipagawa mo muna. Kapag napanood mo, then you try it the next time around.

Sinubukan namin ni AVP Kram iyan dati. Ang higpit ng fuel filter ko. Ayaw matanggal. Hindi ko pa maipasok yung wrench kasi nakabara yung intercooler at kung ano ano pa. Nakuryenta pa si Kram dahil may natamaan ata siyang wire with his metal wrench in hand.

Dinala ko na lang sa shop ni GlennSter. Stuck nga yung filter. Pati intercooler kinailangang alisin...

[AC]

tnx po sir pk and sir oteps... hehe...i guess pagawa ko nalang muna...

[OTEP]

Php 80.00 ata ang labor charge sa akin for that.

[AC]

ahh.. ganun lang po? san ka po ba nagpapagawa.. pashare naman.. wala din kasi akong suking mekaniko eh... tnx po

[OTEP]

Pinagawa ko lang sa shop ni GlennSter sa Kamias. Php 80.00 is the labor cost alone. Siyempre iba ang cost nung part (can't remember na).

Binaba kasi yung intercooler ko kaya siguro naging Php 80.00. hehehehe. Baka mas mura yun kung madudukot na agad.

[AC]

tnx po sir otep.. lapit lang pala samin kela sir glenster.. hehe.. kamyas lang pala

[pajerokid]

yup. kelangan baklasin intercooler assembly.

[the_possessed]

i tried replacing fuel filter kahapon sa 4D56.. grabe ang tigas! nagkasugat sugat nako.. di ko padin natanggal.. i removed the interncooler din to give space.. i realize na kelangan kong bumili ng oil filter remover ba yun? kasi ung tali na gamit ko kahapon.. suko nadin sakin..

anyways, tama ba ang gagawin kong step?

a. remove the hose
b. remove fuel filter
c. remove sensor

and kapag naibalik ko na.. anong proper way para i-bleed un?

thanks!

[Engr]

yung sa L300 namin, after ko ma-assemble at ma-loosen yung bleed screw at filter plug sa ilalim, bakit nung pina-pump ko ng maraming beses na, wala pa ring lumalabas na fuel doon?

kaya ginawa ko, hinigpitan ko na yung bleed screw at filter plug sa ilalim at inistart ko na lang, umaandar naman, tapos mga ilang minutes, parang nanginig then um-ok na ulit. ok na kaya yon?

[Ry_Tower]

It's best to 1.) remove first the fuel lines then 2.) remove the whole mounting then 3.) remove the sending unit tapos 4.) oil filter wrench na bahala sa pagtanggal ng fuel filter sa mounting.

[the_possessed]

sa wakas, napalitan ko nadin fuel filter.. medyo madugo din pala ito.. but i've learned my lesson well..

i have to remove the entire hand pump sa sobrang tigas ng fuel filter.. with the right tools hindi siguro mahihirapan..