After Market Bumpers for Gen1 Paj?

[frt]

Anong ok na brand ? TJM? ARB? Other Brands? Price Range? Also if there are websites to view photos? Thanks in advance sa mga reply.

[bogart]

Try mo sa Armark.

Kits Aragon
Tel. (02) 727-7201 to 04
Fax (02) 727-7207
Email armark4wd*usa.com

172 Mabini St. San Juan, Metro Manila
1503 Philippines

Mabait yan!

[Ungas]

There are a lot of after market bumpers, you may have to choose from alloy or steel, then winch bars or bullbars only.

Too bad Kits only carries TJM brand. While RATS distributes ARB. I've seen ECB, Barjo, Kaymar, Gitsham and other brands which I forgot. But these brands will have to be ordered them from Australia. Though, I think you can pre-order Kaybar bars with Kits.

Most of the prices have gone up already, probably ranging from 35K-50K a piece.

[OTEP]

You can have one fabricated (like they do in the U.S.). The ones they are building weigh just about the same but are more heavy duty than the Oz bars. Ewan ko lang sa Pilipnas if quality will stay the same. But they are building theirs out of their own backyards using readily avialable materials.

I like TJM brand better esp. the T15 series because they look cleaner than the ARB ones which look similar to the T13 TJM's.

[frt]

hmmm..medyo matagal palang ipunan to...meron bang mga pics? sorry di ako maka search eh :D

[Ungas]

Eto po yung site ng TJM >> http://www.tjmproducts.com.au/master_frameset.asp

Eto naman sa ARB >> http://www.arb.com.au/

You have to navigate thru their site, di ko ma cut yung links.

[Ungas]

Eto pala yung Pajero applications: http://www.tjmproducts.com.au/brochures/pajero.pdf


PDF file, Adobe reader required. 2.5MB 7 pages

[tebs]

frt,
may suggestion ako, why not go to surplus shops? malamang may mga bullbars sila for gen1.
for sure, mas mura yun kesa brand new. and i think, a second hand bullbar will not affect its use. hindi naman sya nalalaspag tulad ng winch.
tapos yung na-save mo, ipangdagdag mo na lang sa ibang accessory

[frt]

TEBS,

Yung front bumper ko medyo kinalawang yung frame sa likod. Sa harap maganda pa (Chrome-Nice). So gusto ko lang bumili nang bumper, eh naisip ko yung medyo sporty looking na. Ayaw ko nga nung may bullbar eh.

May bullbar nga ako sa bahay na stainless nakatanga lang. kung may gusto bumili name your price :D

[tebs]

what i meant about the bullbars is yung mga pinagtanggalan ng mga surplusan. yung mga branded rin na TJM, ARBs. hindi yung mga stainless na di mo maintindihan ang design.
kita mo si kimpoy, galing sa surplus yung bumper nya for his strading.gwapo di ba?

[frt]

Ganito sana eh...ok ba to?

[OTEP]

Kung ganyan lang, kaya i-fabricate yan. Ask mo na lang mga Pampanga off-roaders. Halos wala namang tube work involved.

Pero tama si Tebs, may mga surplust TJM, ARB, etc. lalo na sa Pampanga. Galing sa mga ex-JDM na 4x4's.

[boybi]

Originally posted by frt


Ganito sana eh...ok ba to?

simpleng simple lang yan, kahit siguro welder namin kayang gawin yan, pero syempre hindi kasing pulido ng orig. pero makukuha naman sa masilya and pintura.

pwedeng gamitan yan ng channel bar, tiyak mas matibay pa kesa sa mga TJM or ARB

[fidelito]

hi,baka may alam kayo na mura na mag fabricate ng arb bumper sa manila,lagay ko lang sa 93 land rover discovery.or any used arb from suv.bilin ko na lang kung mura.tnx a lot.pls tex 0917 929 1000

[RedHorse]

OT Lang:

street legal ba yong 4 na aux lights?

[OTEP]

Sa Pilipinas hindi. Pero ang nakalagay ata sa laws natin ang Fog Lamp. So kapag auxillary driving or flood lamp ang nilagay mo, baka makalusot pa.

[chorizo]

Originally posted by OTEP
Sa Pilipinas hindi. Pero ang nakalagay ata sa laws natin ang Fog Lamp. So kapag auxillary driving or flood lamp ang nilagay mo, baka makalusot pa.

Mainit pa ba ang mga pulis regarding this? Can they tell the difference between fog lights and aux lights. Eh kung dalawa lang and naka install, huhulihin pa ba ako?

[OTEP]

Yun ang problema, they don't know the difference. So they will still pull you over.

Pero hindi naman sila mainit diyan. Actually, fog lamps above the level of the headlamps are also prohibited. But we have a Raybrig roof lamp on our roorfrail.

[frt]

Originally posted by boybi
simpleng simple lang yan, kahit siguro welder namin kayang gawin yan, pero syempre hindi kasing pulido ng orig. pero makukuha naman sa masilya and pintura.

pwedeng gamitan yan ng channel bar, tiyak mas matibay pa kesa sa mga TJM or ARB

ok ok sige titingin ako sa pampanga...si kimpoy ba darating sa sat? tanungan ko

[nicoboy2]

FRT, sa pampanga may nakita na akong fabricated...gusto mo minsan pagtanong natin