Results 1 to 10 of 20
-
January 28th, 2004 05:48 PM #1
Anong ok na brand ? TJM? ARB? Other Brands? Price Range? Also if there are websites to view photos? Thanks in advance sa mga reply.
-
January 28th, 2004 06:06 PM #2
Try mo sa Armark.
Kits Aragon
Tel. (02) 727-7201 to 04
Fax (02) 727-7207
Email armark4wd*usa.com
172 Mabini St. San Juan, Metro Manila
1503 Philippines
Mabait yan!
-
January 28th, 2004 06:49 PM #3
There are a lot of after market bumpers, you may have to choose from alloy or steel, then winch bars or bullbars only.
Too bad Kits only carries TJM brand. While RATS distributes ARB. I've seen ECB, Barjo, Kaymar, Gitsham and other brands which I forgot. But these brands will have to be ordered them from Australia. Though, I think you can pre-order Kaybar bars with Kits.
Most of the prices have gone up already, probably ranging from 35K-50K a piece.
-
January 28th, 2004 07:00 PM #4
You can have one fabricated (like they do in the U.S.). The ones they are building weigh just about the same but are more heavy duty than the Oz bars. Ewan ko lang sa Pilipnas if quality will stay the same. But they are building theirs out of their own backyards using readily avialable materials.
I like TJM brand better esp. the T15 series because they look cleaner than the ARB ones which look similar to the T13 TJM's.
http://docotep.multiply.com/
Need an Ambulance? We sell Zic Brand Oils and Lubricants. Please PM me.
-
January 28th, 2004 09:34 PM #5
hmmm..medyo matagal palang ipunan to...meron bang mga pics? sorry di ako maka search eh :D
-
January 28th, 2004 09:54 PM #6
Eto po yung site ng TJM >> http://www.tjmproducts.com.au/master_frameset.asp
Eto naman sa ARB >> http://www.arb.com.au/
You have to navigate thru their site, di ko ma cut yung links.
-
January 28th, 2004 09:59 PM #7
Eto pala yung Pajero applications: http://www.tjmproducts.com.au/brochures/pajero.pdf
PDF file, Adobe reader required. 2.5MB 7 pages
-
January 29th, 2004 01:18 AM #8
frt,
may suggestion ako, why not go to surplus shops? malamang may mga bullbars sila for gen1.
for sure, mas mura yun kesa brand new. and i think, a second hand bullbar will not affect its use. hindi naman sya nalalaspag tulad ng winch.
tapos yung na-save mo, ipangdagdag mo na lang sa ibang accessory
-
January 29th, 2004 11:03 AM #9
TEBS,
Yung front bumper ko medyo kinalawang yung frame sa likod. Sa harap maganda pa (Chrome-Nice). So gusto ko lang bumili nang bumper, eh naisip ko yung medyo sporty looking na. Ayaw ko nga nung may bullbar eh.
May bullbar nga ako sa bahay na stainless nakatanga lang. kung may gusto bumili name your price :D
-
January 29th, 2004 01:06 PM #10
what i meant about the bullbars is yung mga pinagtanggalan ng mga surplusan. yung mga branded rin na TJM, ARBs. hindi yung mga stainless na di mo maintindihan ang design.
kita mo si kimpoy, galing sa surplus yung bumper nya for his strading.gwapo di ba?
planning to keep it for 15yrs just done 10,000 km already replaced the transfer case fluid w/...
Suzuki JIMNY [merged threads]