Help: Pajero steering conversion

**vsm712** · November 12th, 2003 11:08 PM

ic..thanks for the info....sige thanks a lot..

**vsm712** · November 12th, 2003 11:10 PM

actually..medyo magaspang ang steering nung i tried it..ano kaya deperensiya pag ganun?

**vsm712** · November 12th, 2003 11:25 PM

btw, do you know of any shops where i can get a orig lhd pajero gear box? contact info would be perfect! thanks...

**frt** · November 13th, 2003 12:54 AM

VSM...i have a GEN 1 paj na converted also....went thru the process of getting a gear box na Mitsu original pero surplus lang. Comes with a PITMAN arm already. Cost me about 20k parts plus labor pero after 6 months nagkaroon nang leak...so repair kit na mitsubishi and mahal! be ready for this things.

I had mine done at EKS Auto Clinic something in Cainta (Imelda Avenue almost in front of Sta. Lucia) Edmund is the shop owner and expert na sila sa ganitong trabaho. Medyo marami nagpapagawa kaya you need to sked in advance. Sya na rin naghanap nang gear box para sa akin...

Pero kung taga south ka why dont you try the shop mentioned in the other thread yung sa Multinational. Ako taga Paranaque eh wala akong alam na shop that time (Sept 2002)

Sa Banawe Millenium Star (near EROD) meron ata gear box na pajero. Pati shift knob na A/T for LHD may nakita ako don kaya lang brown eh gray ang interior ko.

Makita mo pag pinalitan na gear box it has a better feel than the ISUZU or toyota...besides yung pitman arm nyan welding so medyo delikado. Also the turning radius should improve.

**vsm712** · November 13th, 2003 11:17 AM

thanks frt sa lahat ng inputs mo...it will surely help a lot..

actually, yung unit ko nakuha ko mismong importer na meron na din shop...they stripped the unit once they do the conversion...so in sense, i can let them change it to orig gear box...problem ko lang is kung saan makakakuha nito...

sa tarlac po ako...and don't know much dito sa manila...so i do need specific contacts and directions in case others would have additional suggestions.

sir, frt...any other additional parts that i need to replace which will give a big importance para not to lose control of the steering?

**vsm712** · November 13th, 2003 11:56 AM

if anybody you know na nagbebenta ng gear box for pajero..kindly tell them to contact me 09155356826

i got an estimate price from others mga 10-12T daw ang pajero 2nd gearbox.

**jga22bo** · November 13th, 2003 12:33 PM

vsm712
tama yung price ng steering gearbox, pero nagbabago yan pag marami ang naghahanap, kung bag law of supply and demand. Yung presyo na yan pang mando gear box yan, nakuha mo naba oto mo? You also have to check the universal steering joint kc sigurado kung pang bighorn nilagay, they welded the joint n column, kc iba ang spline. Ill try to ask magkano dito sa importer ng surplus korean parts dito baka maka mura ka.

**nap123** · November 13th, 2003 04:34 PM

jga22bo,
tanong ko lang mas ok palang bumili ng bighorn converted kaysa pajero converted dahil original gearbox gamit ng bighorn? thanks

**vsm712** · November 13th, 2003 04:46 PM

probably yes mas ok siguro bumili ng bighorn that is if ok sayo ang bighorn in the first place....di ko pa nakuha unit ko..

btw, sabi nila..walang weldingan na ginawa...machine made daw pagkakagawa ng mga recent conversion at di na tulad ng dati na puto welding nga...just don't know if totoo that's why i'm still interested to replace it with orig gear box.

jga22bo, san makikita ung sinsabi mong universal joint para i can make sure ok siya...thanks nga pala sa inputs..

**nap123** · November 13th, 2003 05:23 PM

i got mine last july bighorn lotus edition 93. so far ok naman. Yung unit mo ba auction mo binili? yung 2.8 na ang engine? ok yan pajero yang nga ang first choice ko kaso d kaya ng budget kaya bighorn nakuha ko. punta ka ng banawe mag canvass ka don personally mas makakapili ka at makakatawad ka ng husto. tutal may shop ka ng gagawa ng conversion.