Pajero expert: jga22bo thread

[pajero freak]

Remember when I was looking for someone who could install a fiberglass top for the J-Top. I found one. Ang linis ng gawa - OK na OK ang bubong ko ngayon. Parang hindi open top dati. And no seams either to betray the original open top. I got that and more!

For more than a year that I've been driving my Paj I thought normal lang yung blinking front wheels sa dash. He fixed that as well - at ang tulin ng takbo ngayon! (I can actually jackrabbit now - you know the feeling when you suddenly step on the accellerator from stop and you are thrown back?) The actuators for the front hubs were the culprit. They were not disengaging (thus the blinking). And he showed me what those solenoids did and how they work for the front hubs. High tech pala ang paje. He saw where the turbo leaks - mga hose lang naman. But still he's one keen hawk when looking at your Paj.

He fixed my side mirror (converted kasi diba - mali ang angles) Mina-machine niya yung loob. You retain your motor and retraction capabilities of your mirror. Yung angles lang ang mababago.

He fixed my airconditioning. He did his own aircon job on their Paj's. (You know how the conversion guys do their sloppy work on the airconditioning. Minsan kita pa yung evaporator sa ilalim ng dash). He can retube that whole system. He vacuums the lines as well before recharging (which is important since when air mixes with freon you get a corrosive acid that eats through the aluminum lines). He knows what needs to be replaced and what doesn't. (Sa kanya ko nalaman that dryers need to be shaken to see if it needs replacement). That guy knows about refrigeration systems.

If you need any work done on your Paj, this is the guy to contact. His name is Joseph Atotubo. Cell no. is 09178405942. He lives at the Multinational Village sa may NAIA. He can do anything on your Paj. He even makes his own full hood with scoop for 7thou I think- fiberglass (And don't worry about the ruggedness of the hinges and the stability and sturdiness of the hood - they're all accounted for!) He practically has a machine shop of his own in his house and can fashion any mechanical gadget/devices for you. He used to be a robotics engineer sa Nissan Laguna which is way too far to be heading to and from work and the pay so low so he decided to work on projects na lang and dedicate his time to tweaking Pajs. One thing you should note about this guy is he takes care of details. He even solders wiring splices one by one kahit gano kaliit! Saang electrical shop ka makakakita ng ganun!

The guy is very accomodating. He is the fiberglass and mechanical expert if you're looking for one! And a Pajero enthusiast kaya you can trust your Pajero will be in good hands with him. He's the only guy I've met who can talk about the ins and outs of the Paj and it's mechaninicals the whole day and not run out of anything to say. He can tell you what's wrong with your Paj. He practically does everything - he even painted their pajs!

He visits Kotse.com and has never visited this site. I told him here is where all THE Paj enthusiasts and owners go. So I'd post his name here I told him.

[pajerokid]

Very nice feedback PF!!!

My cousin may be looking for a person like him!

[wreckless]

salamat sa info..

[benchph1]

Hmmm... pati kaya ibang makes gumagawa din sya? (e.g toyota, nissan, etc etc)

[5Speed]

uyyy....masabi nga dun sa kaibigan ko...

[marwen]

magkano naman talent fee..???

[OTEP]

Magkano paayos ng blinking lights? Mine are currently blinking like hell.

My speedometer is also not working at the moment.

[jga22bo]

this is joseph, the guy pajero freak is talking about. My prices are very affordable and reasonable plus I make sure that your getting your moneys worth.

[gfaleghorn]

hi joseph,

pare i have a j-top v6 3.5, may i consult the problem of my pajero. the engine creates a noise similar to a diesel, if you know what i mean. some mechanics suggested i change the oil to a fully synthetic type and so i did. for a few weeks, the noise was eliminated but come two months, the sound got back again. have you encountered fixing this problem to some pajeros before? also my front wheels are also blinking on the panel? may i know the exact address of your shop so i can bring my pajero for check up and some fixing?

john

[Bubbles]

Joseph,
malamon yung nissan TD42 engine ko. may magagawa ba doon?

[NightRock]

Welcome to Tsikot Mr. Joseph Atotubo (sounds like Auto Turbo )

For sure marami kang magiging coustomer dito.. Isa na ko don.. see you next month.. my pajero needs a consultant hehehe

[OTEP]

I hope to see you when I'm not busy. Could you post a sketch to your shop?

Maybe the Pajero guys can meet up there sometime.

[bogart]

Originally posted by OTEP
I hope to see you when I'm not busy. Could you post a sketch to your shop?

Maybe the Pajero guys can meet up there sometime.

OO nga, post a sketch. For sure madami kang magiging customer dito. (inulit ko lang yung sinabi ni NightRock ah) Dag-dag mo na ako.

O Pajero guys eb na dun!

[KCboy]

cge, set nyo, sbay tayo pnta. guso ko din pageneral check up pajero ko.

[jga22bo]

Madali lang puntahan, its very near NAIA lang. Gawa tayo kaya ng pajero club? what you think?

[bogart]

jga22bo,

i'm not familiar with multinational village, so directions would be helpful.

thanks.

[Jeepcruizerph]

Hehe mayroon ng PAJERO MASTER ang DC hehe :D :D :D

[pajero freak]

Ayaw makapasok yung attachment ko a. Pakitingnan if OK.

[vsm712]

Sir Joseph, just hoping to get your expert advice...I will be getting a pajero SWB na converted by end of this month...thing is, they use izuzu big horn gear box for the conversion kase ata mahal at mahirap makakuha nung pang pajero talaga...pero accdg to them hindi weldingan ginawa kundi pina machine shop talaga...so safe daw...but i still worry dahil biyahero ako..

now, do you know where to get orig pajero gear box and other stuff needed to make the conversion na parang orig? also, how much would it cost me kung sayo ko pagawa? and can you list down all the parts needed to be replaced so that i will have an idea?

thanks..

[pajerokid]

A Pajero club is long overdue....

vsm, having an Isuzu gearbox in a Mitsu just doesnt sound right...