New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 12 of 13 FirstFirst ... 28910111213 LastLast
Results 221 to 240 of 254
  1. Join Date
    Nov 2019
    Posts
    1,533
    #221
    Quote Originally Posted by Deestone View Post
    I ask the SA how much would it cost me if mineral and/or synthetic. She told me 3100 for the mineral and 5500 for the synthetic. So I go with the synthetic oil and she told me just to add the fuel injection cleaner which I agreed so total it cost me 5700.
    Quote Originally Posted by Deestone View Post
    I check the billing statement and here is the breakdown:

    Checkup - Php320
    Oil Filter - Php873.60
    Gasket - Php95.20
    Radiator Sticker - Php6.90
    Colored Rags - Php10.00
    Miscellaneous - Php500.00
    Engine Oil - Php4,588.00
    Fuel System Treatment - Php640.00
    Hindi nila inoffer yung antibac?
    Hanggang ngayon, tinatry pa rin i offer ng CASA antibac every PMS.

    Yung Fuel System treatment yung pwd dyan tanggalin.
    Malamang nandyan sa miscellaneous yung car wash.

    Yung Fuel injection cleaning, better if makita mo if inapplyan nila para masulit yung bayad.
    But this is not actually needed especially bago pa unit.
    Bat kaya nanghingi sila ng labor for checkup?
    Hindi ba free labor for first 1k PMS unit nyo?

  2. Join Date
    Feb 2019
    Posts
    4,291
    #222
    Quote Originally Posted by carxynogen View Post
    Hindi nila inoffer yung antibac?
    Hanggang ngayon, tinatry pa rin i offer ng CASA antibac every PMS.

    Yung Fuel System treatment yung pwd dyan tanggalin.
    Malamang nandyan sa miscellaneous yung car wash.

    Yung Fuel injection cleaning, better if makita mo if inapplyan nila para masulit yung bayad.
    But this is not actually needed especially bago pa unit.
    Bat kaya nanghingi sila ng labor for checkup?
    Hindi ba free labor for first 1k PMS unit nyo?
    Antibac could be the miscellaneous fee because the SA told me it should be included I recall it. Yes PMS labor should be free but the 320 could be the checkup fee and not the labor itself because labor cost is more than 1k afaik.

  3. Join Date
    Feb 2019
    Posts
    4,291
    #223
    Btw, I noticed that the doors you need to exert some force to close it properly. So I usually have to close the door twice and the mall security guard when they open the rear door to check they have to close it 2x too.

  4. Join Date
    Mar 2008
    Posts
    54,635
    #224
    Quote Originally Posted by Deestone View Post
    Btw, I noticed that the doors you need to exert some force to close it properly. So I usually have to close the door twice and the mall security guard when they open the rear door to check they have to close it 2x too.
    if you wish,
    try lowering your window glass a bit, when closing doors.
    the positive pressure generated by a good seal, might be hindering the door closing.

  5. Join Date
    Mar 2008
    Posts
    54,635
    #225
    Quote Originally Posted by Deestone View Post
    I check the billing statement and here is the breakdown:

    Checkup - Php320
    Oil Filter - Php873.60
    Gasket - Php95.20
    Radiator Sticker - Php6.90
    Colored Rags - Php10.00
    Miscellaneous - Php500.00
    Engine Oil - Php4,588.00
    Fuel System Treatment - Php640.00
    someone here once suggested,
    look at your owner's manual for the schedule of pms.
    anything on the casa's job sheet but is not mentioned there, is an optional only and may be removed, without fear of manhandling your car.

  6. Join Date
    Feb 2019
    Posts
    4,291
    #226
    Quote Originally Posted by dr. d View Post
    someone here once suggested,
    look at your owner's manual for the schedule of pms.
    anything on the casa's job sheet but is not mentioned there, is an optional only and may be removed, without fear of manhandling your car.
    Have you seen the mitusbishi manual? It is so tiny.... the letters on the pms are so tiny I cannot read it.

  7. Join Date
    Mar 2008
    Posts
    54,635
    #227
    Quote Originally Posted by Deestone View Post
    Have you seen the mitusbishi manual? It is so tiny.... the letters on the pms are so tiny I cannot read it.
    get a magnifying glass, po. i have one on my table, for instances like these.
    let it not be said, "hindi ninyo kasi binasa ang manual, eh."

  8. Join Date
    Feb 2024
    Posts
    1,289
    #228
    Quote Originally Posted by Deestone View Post
    Btw, I noticed that the doors you need to exert some force to close it properly. So I usually have to close the door twice and the mall security guard when they open the rear door to check they have to close it 2x too.
    Check door alignment.

  9. Join Date
    Mar 2008
    Posts
    54,635
    #229
    Quote Originally Posted by Motortrend View Post
    Check door alignment.
    if you see a mis-alignment, don't attempt to make the adjustments yourself.
    it will void the manufacturer's warranty.
    bring it to the casa.

  10. Join Date
    Jun 2011
    Posts
    1,378
    #230
    Quote Originally Posted by dr. d View Post
    if you wish,
    try lowering your window glass a bit, when closing doors.
    the positive pressure generated by a good seal, might be hindering the door closing.
    +1. Vaccum effect.

  11. Join Date
    Feb 2014
    Posts
    2,781
    #231
    Quote Originally Posted by dr. d View Post
    if you wish,
    try lowering your window glass a bit, when closing doors.
    the positive pressure generated by a good seal, might be hindering the door closing.

    ever wondered why you don't feel this positive pressure in your ear drums when you slam the door shut? coz there's no pressure

    there are these delicate little rubber flaps that open at the slightest overpressure

  12. Join Date
    Jun 2011
    Posts
    1,378
    #232
    Quote Originally Posted by Vodka View Post
    ever wondered why you don't feel this positive pressure in your ear drums when you slam the door shut? coz there's no pressure

    there are these delicate little rubber flaps that open at the slightest overpressure
    Malamang maliit ang flap opening nito, kaya hindi agad nag equalize ang pressure.

  13. Join Date
    Feb 2024
    Posts
    1,289
    #233
    Deestone, let us know once the Casa has checked the doors.

  14. Join Date
    Nov 2009
    Posts
    3,522
    #234
    Quote Originally Posted by bxr monkey View Post
    Malamang maliit ang flap opening nito, kaya hindi agad nag equalize ang pressure.
    These flaps hidden on the walls are also called Air Drafter.

  15. Join Date
    Feb 2019
    Posts
    4,291
    #235
    Quote Originally Posted by Motortrend View Post
    Deestone, let us know once the Casa has checked the doors.
    Yep will let CASA check it in my next PMS I forgot to tell them last weekend.

  16. Join Date
    Feb 2019
    Posts
    4,291
    #236
    Is it okay to use the existing conduction plate provided by CASA? as long as I have a copy of the CR and OR? because I will not get a a temporary plate and will wait for the official LTO plate.

  17. Join Date
    Nov 2019
    Posts
    1,533
    #237
    Share ko lang.
    4N15 din ba engine ng latest montero?

    Log into Facebook | Facebook

  18. Join Date
    Oct 2010
    Posts
    2,551
    #238
    Quote Originally Posted by Deestone View Post
    Is it okay to use the existing conduction plate provided by CASA? as long as I have a copy of the CR and OR? because I will not get a a temporary plate and will wait for the official LTO plate.
    Yes, no problem yan, mas maganda casa issued yung temporary plate. Kung may assigned plate number na sa OR CR mo, pagawa ka ng bago sa casa with the assiigned plate number. P200 lang ang singil.
    Last edited by glenn_duke; March 16th, 2024 at 08:27 PM.

  19. Join Date
    Feb 2019
    Posts
    4,291
    #239
    Quote Originally Posted by glenn_duke View Post
    Yes, no problem yan, mas maganda casa issued yung temporary plate. Kung may assigned plate number na sa OR CR mo, pagawa ka ng bago sa casa with the assiigned plate number. P200 lang ang singil.
    I ask my agent and she told me they cannot make me a temporary plate I should get one outside.

  20. Join Date
    Feb 2019
    Posts
    4,291
    #240
    Quote Originally Posted by carxynogen View Post
    Share ko lang.
    4N15 din ba engine ng latest montero?

    Log into Facebook | Facebook
    I didn't watch the whole video but probably just an isolated case? so the engine needs overhauling in this situation?

Page 12 of 13 FirstFirst ... 28910111213 LastLast
4th Gen Montero Sport (2023)