2012 Mitsubishi Adventure?

[mr_dynamiteph]

I was able to run PapaGo! X8 Philippines on my HU. 100% tested and working!!!

Car Model - Adventure GLS Sport SE 2012
HU Model - AVT IM-6307T

1) Download PapaGo! X8 Philippines.
PM me for the exact download links.

2) Extract RAR files to your SD card.

3) Insert SD card to HU.

4) Open HU.

5) Go to NAVI to enter navigation mode.

6) Go to settings > Browse files, set EXE file to X8_C3.EXE > Press Back > Save Settings
Note:
EXE file depends on your BAUD rate and COm port. Inisa-isa ko lang po yung EXE files from C1 to C9, I was able to get GPS signal sa C3 EXE. Kung pareho lang po tayo ng HU, malamang same din lang ng setting.

7) Open PapaGo X8 GPS Software by clicking NAVI.

To verify if GPS is activated:
- 'GPS activated!' voice prompt will be heard upon startup.
- Go to Advanced Setting > System Status. You must be able to see satellites available in blue and red color.

Note:
Nung nasa loob po ng garage na may bubong ang car, hindi ako makasagap ng GPS satellite signal, paglabas ko sa garage, in 1 minute meron na po mga 5 blue and 6 red spots. The red color indicates
that the signal is unstable and unlocked; the blue color indicates
that the satellite signal is locked. Status must be fixed.

8) Go back to Main Menu > Map Mode or Navigate mode > You must be able to see your current location.

9) Set your destination and press Go!

Enjoy!

Thanks to christerdom! Dahil sa iyo sir kaya namin nalaman na merong PapaGo for our HU.

sir pa pm naman link... thanks.

[mark_dhudz05]

sir pde po p pm ng link,, tnx po

[cardict]

sir pde po p pm ng link,, tnx po

sir,page 19 bye eminem6480,backthread

[sysop]

I was able to run PapaGo! X8 Philippines on my HU. 100% tested and working!!!

Car Model - Adventure GLS Sport SE 2012
HU Model - AVT IM-6307T

1) Download PapaGo! X8 Philippines.
PM me for the exact download links.

2) Extract RAR files to your SD card.

3) Insert SD card to HU.

4) Open HU.

5) Go to NAVI to enter navigation mode.

6) Go to settings > Browse files, set EXE file to X8_C3.EXE > Press Back > Save Settings
Note:
EXE file depends on your BAUD rate and COm port. Inisa-isa ko lang po yung EXE files from C1 to C9, I was able to get GPS signal sa C3 EXE. Kung pareho lang po tayo ng HU, malamang same din lang ng setting.

7) Open PapaGo X8 GPS Software by clicking NAVI.

To verify if GPS is activated:
- 'GPS activated!' voice prompt will be heard upon startup.
- Go to Advanced Setting > System Status. You must be able to see satellites available in blue and red color.

Note:
Nung nasa loob po ng garage na may bubong ang car, hindi ako makasagap ng GPS satellite signal, paglabas ko sa garage, in 1 minute meron na po mga 5 blue and 6 red spots. The red color indicates
that the signal is unstable and unlocked; the blue color indicates
that the satellite signal is locked. Status must be fixed.

8) Go back to Main Menu > Map Mode or Navigate mode > You must be able to see your current location.

9) Set your destination and press Go!

Enjoy!

Thanks to christerdom! Dahil sa iyo sir kaya namin nalaman na merong PapaGo for our HU.

Nasubukan ko na po yung X8_C1 to X8_C9 pero walang nag activate.. Yung COM1 po ba gagalawin din sa settings?

[Mac40]

Sir subukan nyo po yung X8_C2 yun ang gumana sakin tapos lumabas po kayo ng garahe nyo para makasagap ng satellite signal.

[sysop]

anong COM number po gamit nyo?

[jhun_1027]

sir eminem6480,

Good day, makisuyo po sana ako ng pa share ng link RE: papago x8 philippines

thank you very much sir

[skybison]

sir eminem6480,

Good day, makisuyo po sana ako ng pa share ng link RE: papago x8 philippines

thank you very much sir

page 19.

[kiensign]

I was able to run PapaGo! X8 Philippines on my HU. 100% tested and working!!!

Car Model - Adventure GLS Sport SE 2012
HU Model - AVT IM-6307T

1) Download PapaGo! X8 Philippines.
PM me for the exact download links.

2) Extract RAR files to your SD card.

3) Insert SD card to HU.

4) Open HU.

5) Go to NAVI to enter navigation mode.

6) Go to settings > Browse files, set EXE file to X8_C3.EXE > Press Back > Save Settings
Note:
EXE file depends on your BAUD rate and COm port. Inisa-isa ko lang po yung EXE files from C1 to C9, I was able to get GPS signal sa C3 EXE. Kung pareho lang po tayo ng HU, malamang same din lang ng setting.

7) Open PapaGo X8 GPS Software by clicking NAVI.

To verify if GPS is activated:
- 'GPS activated!' voice prompt will be heard upon startup.
- Go to Advanced Setting > System Status. You must be able to see satellites available in blue and red color.

Note:
Nung nasa loob po ng garage na may bubong ang car, hindi ako makasagap ng GPS satellite signal, paglabas ko sa garage, in 1 minute meron na po mga 5 blue and 6 red spots. The red color indicates
that the signal is unstable and unlocked; the blue color indicates
that the satellite signal is locked. Status must be fixed.

8) Go back to Main Menu > Map Mode or Navigate mode > You must be able to see your current location.

9) Set your destination and press Go!

Enjoy!

Thanks to christerdom! Dahil sa iyo sir kaya namin nalaman na merong PapaGo for our HU.

Maraming salamat boss eminem. Mine's done without any problem aside dun sa Nasa NCR ako. Kelangan ko lang pala magpunta sa open para malocate ako ng accurate :P

One simple question po pala, pano po iturn-off sa HU yung radio. autoplay kasi lagi basta bukas ang HU e

[kiensign]

Hello.. Nagdrive ako along SLEX kahapon pero nasa makati NCR pa rin location ko. hindi pa rin ako malocate ng GPS. anything I'm missing?
Salamat po

[kiensign]

Ok napagana ko na. mali lang pala COM port nya. I got mine at COM2 using X8_C2 and is perfectly working now.
Ganun lang pala magdisable ng radio, select lan ng ibang input
Maraming salamat po dito thread and to mr eminem ^^ nakatipid pa ng 5k

[remfpage]

I was able to run PapaGo! X8 Philippines on my HU. 100% tested and working!!!

Car Model - Adventure GLS Sport SE 2012
HU Model - AVT IM-6307T

1) Download PapaGo! X8 Philippines.
PM me for the exact download links.

2) Extract RAR files to your SD card.

3) Insert SD card to HU.

4) Open HU.

5) Go to NAVI to enter navigation mode.

6) Go to settings > Browse files, set EXE file to X8_C3.EXE > Press Back > Save Settings
Note:
EXE file depends on your BAUD rate and COm port. Inisa-isa ko lang po yung EXE files from C1 to C9, I was able to get GPS signal sa C3 EXE. Kung pareho lang po tayo ng HU, malamang same din lang ng setting.

7) Open PapaGo X8 GPS Software by clicking NAVI.

To verify if GPS is activated:
- 'GPS activated!' voice prompt will be heard upon startup.
- Go to Advanced Setting > System Status. You must be able to see satellites available in blue and red color.

Note:
Nung nasa loob po ng garage na may bubong ang car, hindi ako makasagap ng GPS satellite signal, paglabas ko sa garage, in 1 minute meron na po mga 5 blue and 6 red spots. The red color indicates
that the signal is unstable and unlocked; the blue color indicates
that the satellite signal is locked. Status must be fixed.

8) Go back to Main Menu > Map Mode or Navigate mode > You must be able to see your current location.

9) Set your destination and press Go!

Enjoy!

Thanks to christerdom! Dahil sa iyo sir kaya namin nalaman na merong PapaGo for our HU.

can someone send me the link...

thanks in advance!

[eminem6480]

Here's the latest link:
http://www.*******.com/rar/2OkL6Ig9/Navipart1.html
http://www.*******.com/rar/ujeFb80o/Navipart2.html
http://www.*******.com/rar/mWFcRXDP/Navipart3.html

[eminem6480]

Here's the latest link:
http://www.*******.com/rar/2OkL6Ig9/Navipart1.html
http://www.*******.com/rar/ujeFb80o/Navipart2.html
http://www.*******.com/rar/mWFcRXDP/Navipart3.html

4 s h a r e d

[gerald_g]

Malambot ba ang clutch ng Mitsubishi Adventure? Let's say for a 60 year old lady, that's relatively healthy. Thanks

[Retz]

Malambot ba ang clutch ng Mitsubishi Adventure? Let's say for a 60 year old lady, that's relatively healthy. Thanks

hindi naman sir tama lang tska hindi malalim pag apak mo ng clutch.

[samalibiranjr]

I was able to run PapaGo! X8 Philippines on my HU. 100% tested and working!!!

Car Model - Adventure GLS Sport SE 2012
HU Model - AVT IM-6307T

1) Download PapaGo! X8 Philippines.
PM me for the exact download links.

2) Extract RAR files to your SD card.

3) Insert SD card to HU.

4) Open HU.

5) Go to NAVI to enter navigation mode.

6) Go to settings > Browse files, set EXE file to X8_C3.EXE > Press Back > Save Settings
Note:
EXE file depends on your BAUD rate and COm port. Inisa-isa ko lang po yung EXE files from C1 to C9, I was able to get GPS signal sa C3 EXE. Kung pareho lang po tayo ng HU, malamang same din lang ng setting.

7) Open PapaGo X8 GPS Software by clicking NAVI.

To verify if GPS is activated:
- 'GPS activated!' voice prompt will be heard upon startup.
- Go to Advanced Setting > System Status. You must be able to see satellites available in blue and red color.

Note:
Nung nasa loob po ng garage na may bubong ang car, hindi ako makasagap ng GPS satellite signal, paglabas ko sa garage, in 1 minute meron na po mga 5 blue and 6 red spots. The red color indicates
that the signal is unstable and unlocked; the blue color indicates
that the satellite signal is locked. Status must be fixed.

8) Go back to Main Menu > Map Mode or Navigate mode > You must be able to see your current location.

9) Set your destination and press Go!

Enjoy!

Thanks to christerdom! Dahil sa iyo sir kaya namin nalaman na merong PapaGo for our HU.

Good day Mga Paps!

May update map na kaya itong Papago Software nato? Thanks sa sasagot. God Bless!

[vinyl]

mga sir need help. this is regarding my HU. Touch screen error kahit pindutin koyng reset button. ayaw gumana ng screen. thanks in advance.

[cardict]

Winterpine is the answer,palit touchscreen and sensor which will cost you 6.25k,

mga sir need help. this is regarding my HU. Touch screen error kahit pindutin koyng reset button. ayaw gumana ng screen. thanks in advance.

[jkatzify]

mga sir need help. this is regarding my HU. Touch screen error kahit pindutin koyng reset button. ayaw gumana ng screen. thanks in advance.

Ganyan din sa Lancer ko- tangal negative terminal sa battery wait 1 minute kabit ulit. Reset na ang HU mo.