2012 Mitsubishi Adventure?

[christerdom]

distorted po.. kailangan ata talaga ng pang adventure ng software

[yapoy86]

mukhang kailangan nga talaga ng OS update... pero yung OS naman eh dated august 2011... research pa tayo hehe mahuhuli din natin yan...

[christerdom]

you guyz wont believe me if I tell you that garmin xt is working sa head unit natin, the map is working fine.. the only thing i am battling is the chinese character! :D

[yapoy86]

WHAT??? san nakukuha yan?? hindi distorted yung map??

[christerdom]

yun garmin nakuha ko dun sa gps navigator ko with philippine map my Roadmap.PH. Totally workable sya sa HU natin at very accurate as I test drive it yesterday.

Yun OS ng headunit natin ay Win CE 6.0 (AVT). Problema ay chinese ang character yun default ng OS, kaya naka-open ang navigator ko habang nag tweek-tweek ako ng config nya. at pag nagsalita na like "turn right" eh russian naman hahaha :D

research pa ako sa internet kung paano alisin ang pag ka chinese at russian nito

[drachx]

Thanks for the tip.

It works on my Adv. GLS SE..how about yung sensor baka may tips kayo ..
paano or saan mura buy/install na rin...

TIA

[yapoy86]

sensor ng ano???

[drachx]

pag atras makikta mo sa camera..yung likuran..

[yapoy86]

pag atras makikta mo sa camera..yung likuran..

+

ah.. back up camera yan.. bukod pa yung reverse sensor... pwede ka bumili ng back up camera ng with license plate mounting...

bro christerdom... share na lang po ng steps.. hehehe

damot talaga ng mitsu eh...

[christerdom]

As I have previously posted, I managed to install Garmin XT and now Papago! X8 to our Headunit.

For Garmin XT, managed to resolve the Chinese characters and Bulgarian voice instruction. But you must be familiar using Garmin product in order for you to navigate up to the settings option to change it to English. Only problem is you won't be able to save the settings, can't save user POI's and other customization you've done. Whenever you open the application, settings goes back to original setup.

And here comes Papago! X8. I am familiar using this navigation tool as I am using it thru my iPhone. I have managed to download the application from the gpsunderground forum. Just enter this from your google search "papago x8 download philippines", the very first thread will contain the link for the application. It's working very fine and as accurate as my iPhone application.

Now in 1 SDcard, I can select 3 navigation software of your choice (or 2 as iNav.PH software map need some calibration). Nice ey?

Btw, iNav software from iNav.ph is important to activate your HU. Without it, you can't run Garmin or Papago! application.

I will post next time perhaps the steps incase you are interest how to make it work

[drachx]

*christerdom any how to do it tips...

TIA

[eminem6480]

*christerdom
Sir, nagtry po ako magdownload ng PapaGo X8. Working naman siya sa HU ng GLS SPort SE 2012. Ito po problems na naencounter ko:
1) Nasa Makati area lang palagi ang current location ko.
2) Walang GPS signal na makita kaya kahit magset ako ng destination, yung simulation lang ang working. Yung actual navigation ayaw, nakastay lang sa current position.

Painform po kami sir how to setup PapaGo X8 correctly. Thanks!

[eminem6480]

I was able to run PapaGo! X8 Philippines on my HU. 100% tested and working!!!

Car Model - Adventure GLS Sport SE 2012
HU Model - AVT IM-6307T

1) Download PapaGo! X8 Philippines.
PM me for the exact download links.

2) Extract RAR files to your SD card.

3) Insert SD card to HU.

4) Open HU.

5) Go to NAVI to enter navigation mode.

6) Go to settings > Browse files, set EXE file to X8_C3.EXE > Press Back > Save Settings
Note:
EXE file depends on your BAUD rate and COm port. Inisa-isa ko lang po yung EXE files from C1 to C9, I was able to get GPS signal sa C3 EXE. Kung pareho lang po tayo ng HU, malamang same din lang ng setting.

7) Open PapaGo X8 GPS Software by clicking NAVI.

To verify if GPS is activated:
- 'GPS activated!' voice prompt will be heard upon startup.
- Go to Advanced Setting > System Status. You must be able to see satellites available in blue and red color.

Note:
Nung nasa loob po ng garage na may bubong ang car, hindi ako makasagap ng GPS satellite signal, paglabas ko sa garage, in 1 minute meron na po mga 5 blue and 6 red spots. The red color indicates
that the signal is unstable and unlocked; the blue color indicates
that the satellite signal is locked. Status must be fixed.

8) Go back to Main Menu > Map Mode or Navigate mode > You must be able to see your current location.

9) Set your destination and press Go!

Enjoy!

Thanks to christerdom! Dahil sa iyo sir kaya namin nalaman na merong PapaGo for our HU.

[yapoy86]

care to share the link please... thanks,

[christerdom]

Ang galing na-post na yun steps, thanks emimem!

Maganda yun interface ng Papago! at most of its POI's are supplied by roadmap.ph at me 3D landmark pa sya esp kung nasa commercial districts ka. Important din yun Junction view kung saan ramp ka sasampa. I find its interface better than Garmin.

Sana nga lang makakuha tayo ng latest map kasi ang alam ko every 6mos nag uupdate ang papago ng map.

Enjoyed its navigating a lot kasi pumunta kami ng Camarines Norte, a voice keep reminding me "please stay within the speed limit", nakakatanggal ng antok.... this is without paying 6k mga tol for the SD Card

Pansin ko lang tumataas ang FC pag long drive. Went as high as 12 l/km yun FC going baguio at bicol and vice versa. Pag within city kahit minsan hindi traffic at ok ang takbo, nasa 10.5 l/km lang ako.

[Mac40]

Enjoyed its navigating a lot kasi pumunta kami ng Camarines Norte, a voice keep reminding me "please stay within the speed limit", nakakatanggal ng antok.... this is without paying 6k mga tol for the SD Card

Pansin ko lang tumataas ang FC pag long drive. Went as high as 12 l/km yun FC going baguio at bicol and vice versa. Pag within city kahit minsan hindi traffic at ok ang takbo, nasa 10.5 l/km lang ako.

Sir pano po pag-activate ng voice warning kasi yung sakin hindi ko mapagana, all other features ok naman.

Thanks.

[Mac40]

Sir pano po pag-activate ng voice warning kasi yung sakin hindi ko mapagana, all other features ok naman.

Thanks.

He he nandun lang pala to sa advance setting dapat pala in english language lang, wag yung female or male voice na naka-enclose. Okey na yung GPS ko 100% working na. Thanks uli.

[Mac40]

HU Model - AVT IM-6307T

1) Download PapaGo! X8 Philippines.
PM me for the exact download links.

2) Extract RAR files to your SD card.

3) Insert SD card to HU.

4) Open HU.

5) Go to NAVI to enter navigation mode.

6) Go to settings > Browse files, set EXE file to X8_C3.EXE > Press Back > Save Settings
Note:
EXE file depends on your BAUD rate and COm port. Inisa-isa ko lang po yung EXE files from C1 to C9, I was able to get GPS signal sa C3 EXE. Kung pareho lang po tayo ng HU, malamang same din lang ng setting.

7) Open PapaGo X8 GPS Software by clicking NAVI.

To verify if GPS is activated:
- 'GPS activated!' voice prompt will be heard upon startup.
- Go to Advanced Setting > System Status. You must be able to see satellites available in blue and red color.

Note:
Nung nasa loob po ng garage na may bubong ang car, hindi ako makasagap ng GPS satellite signal, paglabas ko sa garage, in 1 minute meron na po mga 5 blue and 6 red spots. The red color indicates
that the signal is unstable and unlocked; the blue color indicates
that the satellite signal is locked. Status must be fixed.

8) Go back to Main Menu > Map Mode or Navigate mode > You must be able to see your current location.

9) Set your destination and press Go!

Successfully downloaded and extracted the files on my sd card and followed the detailed steps, however, the current location is always at NCR, Makati and could not change to my current location which is in Bicol area. Any advice which I think I've missed?

Thank you sir eminem6480.

[eminem6480]

*Mac40
Sir kailangan si Advie nakaposition sa clear area. Yung walang bubong at nakaharang sa satellite communication. Punta ka sir sa system status, dapat mat blue dots na madetect at fixed ang position. Kapag success na lahat yan sir, iauto point ka ni Papago sa current location mo.

[Mac40]

Sir inisa-isa ko rin yung mga exe files and BINGO! Yung X8_C2.EXE pala ang applicable sa unit ko. Try nyo mga rin mga bros/sis na hindi pa gumagana ang GPS dapat i-try lahat ng exe files kung alin ang compatible sa HU ninyo.

Many thanks to all specially to eminem6480, christerdom and yapoy86.