Fiber home technologies HG180 Ang brand and model, it is issued by globe
Sent from my Mi A1 using Tapatalk
Fiber home technologies HG180 Ang brand and model, it is issued by globe
Sent from my Mi A1 using Tapatalk
no definitive power draw. but as per specs, its runs on 12V with peak current draw of 1.5A
if only one user is using the wifi band then at most it will only draw around 30% of pp as the tx/rx circuit isn't really loaded by users. then there are power losses at the power brick.. 1w or so.
all in all it 6w-9w range.
you can switch off some bands to lower the power consumption(very marginally).
newer modems can operate with lower power because of the newer chipsets.
Thanks sir, if I take the highest figure from your table, I'll be spending only 100 kesos/month lang pala even if I keep it on 24 hrs/day
Sent from my Mi A1 using Tapatalk
Do you guys leave your modem on 24/7? I never switch mine off kasi.
should i reconsider?
do what you gotta do so you can do what you wanna do
I switch mine between waking to sleeping time
Sent from my Mi A1 using Tapatalk
Yes parents are liable to their minor children for civil damages, subsidiarily kapag may pagkukulang ang school pwede din siya isama sa kaso. Yung criminal side ang hindi, dun papasok yung above 15 to below 18 (with discernment na isyu) at yung 15 and below na wala talaga criminal liability.
^ Yun yata advantage ng Lithium hindi nagtatae di tulad nun carbon at cadmium based. Never pa ako naka encounter na nag t*e na Lithium. Sayang andami ko dinispose some 3yrs ago na laptop batt kasabay ng mga UPS batteries hindi ko akalain ilang cells lang ang nag ffail akala ko noon tapon na talagaNsa P500+ sa Elfoh yung orig 18650 Panasonic at P380 yung China eh.
Pag powered on ang electronic device, it heats up. When you power it off, it cools down. Then you power it up and it heats up again... and so on and so forth.
The solder joints (i. e., connection ng electronic components to the circuit board) expand when hot and contract when cold. This cycle of hot and cold eventually takes its toll on the solder joints and eventually the components.
Sent from my ASUS_T00J using Tapatalk