What Do You Want Now?

**Vodka** · March 20th, 2018 11:49 AM

Originally Posted by ninjababez

yun mga nag dedetail bro blue yun kulay. may mga nakita nako sa olx, di nga lang sumasagot sa txt or tawag

dumating today. blue. via lazada

**Wh1stl3r** · March 20th, 2018 02:44 PM

Originally Posted by cast_no_shadow

Deepdish! Natumbok mo bro! Kanina ko pa iniisip how will I express it, downside nga ni Nomad pag may basa na sasakay (payong, footwear etc) chances gagapang yung tubig.

Sent from my iPhone using Tapatalk

Yan ang perfect na mats bro. Weathertech deepdish waterproof base with 3M vinyl surface. Bakit kaya walang nakaisip gumawa nun?

Originally Posted by carwhacko

How do you clean the dirt na natrap? Vacuum?

Sent from my iPhone using Tapatalk

Actually pagpag mabuti and then wash with soap and water. Mahirap matanggal yung ibang dirt pag vacuum lang e.

**AllenR** · March 20th, 2018 02:56 PM

Originally Posted by Wh1stl3r

Yan ang perfect na mats bro. Weathertech deepdish waterproof base with 3M vinyl surface. Bakit kaya walang nakaisip gumawa nun?

I actually tried doing this with deep-dish Huskies topped with the Honda OEM mats.

Results: driver's mat slid around, since the floor anchor is too short and couldn't take both the deep-dish and OEM mats. Passenger and rear mats fared little better, since the surface of the deep-dish mats were smooth.

I guess I could use some velcro tapes under the OEM mats to prevent them from sliding around. I'll try it out when I have a bit of time to mess around.

**Wh1stl3r** · March 28th, 2018 09:17 PM

Originally Posted by AllenR

I actually tried doing this with deep-dish Huskies topped with the Honda OEM mats.

Results: driver's mat slid around, since the floor anchor is too short and couldn't take both the deep-dish and OEM mats. Passenger and rear mats fared little better, since the surface of the deep-dish mats were smooth.

I guess I could use some velcro tapes under the OEM mats to prevent them from sliding around. I'll try it out when I have a bit of time to mess around.

Bro, I don't recommend using adhesives on mats. Tried it (3M velcro IIRC) and after a week of parking in the sun the adhesive melted and it slid when stepped on. Took a long time before it washed off.

**AllenR** · March 28th, 2018 09:29 PM

Originally Posted by Wh1stl3r

Bro, I don't recommend using adhesives on mats. Tried it (3M velcro IIRC) and after a week of parking in the sun the adhesive melted and it slid when stepped on. Took a long time before it washed off.

Thanks for the advice. I was planning on doing it this weekend (I bought 3M velcro strips as well), but not anymore. You just saved me a lot of hassle, thanks again!

**dr. d** · March 28th, 2018 11:04 PM

Originally Posted by Wh1stl3r

Bro, I don't recommend using adhesives on mats. Tried it (3M velcro IIRC) and after a week of parking in the sun the adhesive melted and it slid when stepped on. Took a long time before it washed off.

i tried them all. glue.. tahi..
nothing lasts long enough.

the factory twist locks... i like!

**travajante** · March 29th, 2018 12:12 AM

Originally Posted by AllenR

I actually tried doing this with deep-dish Huskies topped with the Honda OEM mats.

Results: driver's mat slid around, since the floor anchor is too short and couldn't take both the deep-dish and OEM mats. Passenger and rear mats fared little better, since the surface of the deep-dish mats were smooth.

I guess I could use some velcro tapes under the OEM mats to prevent them from sliding around. I'll try it out when I have a bit of time to mess around.

On my Husky liners, I like to top em w/ Nomad. To keep em still, I clamp em down w/ binder clips nearest the seats & away from the feet.

I remove the wings. They're black & stealth. On cheaper liners, I'd slice thru the mat on ridges & the Nomad to let 1 side of the binder clip thru both. Way cleaner.

Sent from my SM-G950F using Tapatalk

**Wh1stl3r** · March 29th, 2018 11:00 AM

Originally Posted by AllenR

Thanks for the advice. I was planning on doing it this weekend (I bought 3M velcro strips as well), but not anymore. You just saved me a lot of hassle, thanks again!

No prob bro. Am trying to think of a better, cheaper solution. For now while it's sunny I'll make do with the free mats.

Originally Posted by dr. d

i tried them all. glue.. tahi..
nothing lasts long enough.

the factory twist locks... i like!

I'm thinking maybe I can have the vinyl loop mat sewn on the deep dish mat and then seal the stitching with silicone sealant. Kaso pangit na, mukhang franken mat hehe. It would also be very heavy.

**AllenR** · March 29th, 2018 11:06 AM

Originally Posted by travajante

On my Husky liners, I like to top em w/ Nomad. To keep em still, I clamp em down w/ binder clips nearest the seats & away from the feet.

I remove the wings. They're black & stealth. On cheaper liners, I'd slice thru the mat on ridges & the Nomad to let 1 side of the binder clip thru both. Way cleaner.

Sent from my SM-G950F using Tapatalk

Interesting, this looks like a great solution!

**dr. d** · March 29th, 2018 11:11 AM

Originally Posted by Wh1stl3r

No prob bro. Am trying to think of a better, cheaper solution. For now while it's sunny I'll make do with the free mats.

I'm thinking maybe I can have the vinyl loop mat sewn on the deep dish mat and then seal the stitching with silicone sealant. Kaso pangit na, mukhang franken mat hehe. It would also be very heavy.

i-tali around the seat mounting frame.