ung mga genset ni sir manikis mga malalaki ata tipong mga pang malls.
Sale ata sa ace hardware ngayon ng genset less 30%, nakita ko kanina lang sa festival mall. IMHO, 2kva is ok kahit naka 1hp AC plus ref and other stuff like ilaw and electric fan.
1400W (bitin ito para sa akin is around 13,999, 2kVA powermate brand is around 15,999.
3kVa for me is a bit large and 2kVa is very handy na din, so if you feel like lending it with your parents and in-laws better you can do so at the back of a small sub compact car like vios.
But if you have bigger car like Fort, Montero and the like transportation of 3kVa mabigat lang talga sya comparecd sa 2kVa.
HTH
Minimum 3kva believe me. Bitin na nga sa akin 3kva eh
Sent from my iPhone using Tapatalk 2
What additive do you pour in on seldom-used generators to prevent gasoline from going stale?
Before i tried using the additive that you can buy at ace and handyman, only to find out that it was also expired. Now rhey erased the expiration dates and still sell the product.
I use blaze on my china genny and it does not go stale even a year of storage. Every year i clean,changeoil and drain my genset.
^
required na lagyan ng additives ang fuel? sa mga diesel gensets, i don't remember putting any additives.
All types of fuel go stale (yes, even diesel) with or with out additives. On seldom used gensets, the best way is to drain and or run the genset once in awhile. Or you can premix the old fuel with fresh fuel, but be ready to encounter misfires (palya) as the engine tries to burn the (mixed) contaminated fuel. As mentioned above, also try to use good fuel, and refrain using E10.
Yung genset ko, more than 2 years ko na hindi napatakbo. Ayaw na magstart kahit ilang hila.
Any idea what to do? I'm looking for a service guy. Kahit more than 3 yrs na cya, only used it once
during a typhoon brownout and also some warm ups when it was still brand new.
Park plug cleaning & change gas will do?
Whenever warming up the genset monthly, make sure na di lang basta papatayin ang kill switch, turn off the fuel cock and let the engine burn thru the remaining gas inside the carb.
Yung siguro naging problem mo, the remaining gas, dried and coked up the carb and the fuel system. Kung small genset lang yan, Pabaklas mo and palinis mo sa mekaniko ng oto.
^
usually ang voltage ang kinoconvert meron kasi minsan mali ang delivery ang requirements ay 230V pero 400V ang na ship. Mabilis lang convert pag voltage nagagawa nila half day lang, phasing I think should be the same.
Need ko 3ph to single phase conversion. 3phase kasi usually mga gensets. Single phase lang kami dito.
Signature
^
Sir boybi, ano ba voltage nung 3phase? pwede mo naman kunin ung 2 hot wires lang kung single phase lang load mo.