any r/c enthusiast post here

[backbone]

any tsikoter na mahilig s r/c?? baka pwede pakita nyo naman para masaya

so, i'll start: the boat is 24", nitro powered marine engine .15 size, can go 40-50kph,,

the hummer, electric powered by nikko, di ko alam speed but pretty quick though, malakas nga lang sa batt. hummer talaga.

sensya medyo blurred taken from foncam...

[knight23]

wow, my dad also has r/c boats. 2 are lying around on his workbench, unfinished. i'll post pics later.

anong makina gamit mo picco or os max?

[schnitzerz4]

rc rin me mine is serpent 1/10 and 1/8 GAS powered and TC3 electric

Im using .10 and .15 novarossi engine

[knight23]

got 4 boats, 2 unfinished. two monoplanes(one unfinished), and two hydroplanes: one catamaran(unfinished) and one tunnelhull.
got two picco engines (0.40 and .67) and 2 os max engines.
all plywood and handmade.

[bleed]

heres mine:



the supra is a Traxxas Nitro 4-tec, too many modifications to list.
the BMW is electric, but its kinda old, so I just use it for showing off :p.
both are controlled by a JR XS3 Controller

[Psylocke]

Buhayin ko kaya yung Clod Buster!

[backbone]

knight23,
pls post pics :kodak: , ang dami nyo palang boat, what's the boat lenght? is it built kit or own built?....i used .15 nitro marine aquacraft engine..planning to upgrade bigger and faster with catamaran body..

schnitzerz4,
pics pls. :kodak: lalo n un gas powered engine.

bleed,
nice cars choice, how fast it go?

[backbone]

Buhayin ko kaya yung Clod Buster!

psyclocke, what type of r/c un clod buster? and the specification?

[bleed]

the 4-Tec tops at around 60mph+, but I never really clocked it. pero ngayon, pinalitan ko yung gears nya, its got crazy acceleration, on 1st gear, its like a bat out of hell

[Psylocke]

psyclocke, what type of r/c un clod buster? and the specification?

[backbone]

thanks for the pic. psylocke..looks that the rear wheel can be steer?,,pretty sure lots of fun during tight turn...i never tried playing this such kind...wala ba sa condition ngayon, sige buhayin mo sayang naman...

bleed,
hilig mo yata drag racing haa, that's cool,,musta naman un nitro engine mo di ba problematic to run??

[kapitan88]

been thinking to get hooked in this hobby for a while, neways, are those cheapo china made planes any good? Those are electrice powered. Anyone tried those? sulit kaya.

[backbone]

been thinking to get hooked in this hobby for a while, neways, are those cheapo china made planes any good? Those are electrice powered. Anyone tried those? sulit kaya.

kapitan88,

kung hilig mo r/c plane marami nang lumalabas na RTR or RTF-ready to run or fly medyo mura, electric powered is preferrable to newbie kasi easy to maintain/use and cheaper compare to gas powered engine..i'm not really sure sa sabi mong china made as long as hinde chinese un instruction maybe its ok try to get atleast 30-36" wingspan kasi the bigger the easy to control, check for the availability of the materials for replacement, lam mo n kasama n dyan un crashes..get the average one don't get the cheapest coz madisappoint k lang...then medyo mahaba un pasensya while learning kasi dami error dito but lots of fun..gudlak...

[empy]

here's a bad pic of my HPI RS4 nitro kit. it has the "student driver" body on it (lamborghini murcielago) kaya barag-barag yung harapan :bwahaha:

also just for fun here are my son's chipipay Tamiya electrics - CLK DTM and Makkinen Evo!!

[backbone]

here's a bad pic of my HPI RS4 nitro kit. it has the "student driver" body on it (lamborghini murcielago) kaya barag-barag yung harapan :bwahaha:

also just for fun here are my son's chipipay Tamiya electrics - CLK DTM and Makkinen Evo!!

M54 powered,
what's the engine size for lambo?,btw, u can replace the body,,,tamiya electric cars are pretty quick thou...

[bleed]

bleed,
hilig mo yata drag racing haa, that's cool,,musta naman un nitro engine mo di ba problematic to run??

man, PITA to tune!!! its very temperamental. I have to fine tune it everytime I go out.

[empy]

M54 powered,
what's the engine size for lambo?,btw, u can replace the body,,,tamiya electric cars are pretty quick thou...

sir, i could be wrong but i believe it is 2.5 cc. i do know that it puts out about half a horsepower. it's the stock HPI 15FE engine.

papalitan ko yung body when i learn to drive better. i was thinking about getting the carrera gt and cadillac escalade bodies. buti na lang cheap ang bodies dito (USD 25) because i have a feeling i might be replacing often, hehehe

[knight23]

picco marine engines (.67 and .40 respectively)


catamaran which has a 0.46 os max engine, this hasnt run yet.
http://www.geocities.com/ralf_knight23/Picture97.jpg
http://www.geocities.com/ralf_knight23/Picture98.jpg

tunnelhull which had the .67 picco in it, this already ran but is currently for repainting.
http://www.geocities.com/ralf_knight23/Picture102.jpg
http://www.geocities.com/ralf_knight23/Picture99.jpg

all are 3ft long. the hulls are plywood and built by my dad and his friend, who is a professional at building these machines.

kyosho mini-z f1 toyota tf103, won it in a raffle from toyota.
http://www.geocities.com/ralf_knight23/Picture104.jpg


sorry for the blurry pics, used my phone

[backbone]

knight23, the boats are great, thanks for posting,,ur dad is not just an enthusiast he's seriously expert with this stuff,,they do business for this? just curious...have u tried playing?..the picco engine is beefy for the boat size, it's gonna be real fast..

[knight23]

backbone, enthusiast lang ang dad ko, yung friend nya is the professional. hehe

i played with the tunnel hull during its brake-in, i was just running it slow, that's the only time i've played w/ it. i think it only ran a couple of times, hindi rin pwede sa open sea kasi unstable. i'll try to find some old pics...

i dont think its beefy, kasi wood na man yung hull and its 3ft long. wala ng time yung dad ko. busy na sa kanyang fishing. hehe