mazda familia 323 rayban bigbody

[Kikomaching]

Good evening mga Sir..newbie lang po sa dito sa forum. Planning to buy po sana matic na Mazda 323 or 626. Para sana sa wife ko and kase pag may lakad lang family. May motor naman ako kaya yun gamit ko daily. Ok pa po ba bumili ngaun ng mga used cars such as 323,626 or familia? Thanks in advance po.

[travajante]

Good evening mga Sir..newbie lang po sa dito sa forum. Planning to buy po sana matic na Mazda 323 or 626. Para sana sa wife ko and kase pag may lakad lang family. May motor naman ako kaya yun gamit ko daily. Ok pa po ba bumili ngaun ng mga used cars such as 323,626 or familia? Thanks in advance po.

In buying old cars, always factor in cost of repairs/restoration, parts cost/availability + the variables like labor....on top of the attractively cheap sticker price, I presume.
Knowing the owner & the car's service & accident history will help dictate.
Try your luck finding a pristine 1 from an OCD owner/wrench. Chances are high you won't regret the purchase.
I can't say go or no go w/ just the make & model as given. Like a math formula w/ too many variables....objective finite answers might not be arrived at.
Good luck in your hunt....find that OCD enthusiast/owner/seller.

[Yatta]

Good evening mga Sir..newbie lang po sa dito sa forum. Planning to buy po sana matic na Mazda 323 or 626. Para sana sa wife ko and kase pag may lakad lang family. May motor naman ako kaya yun gamit ko daily. Ok pa po ba bumili ngaun ng mga used cars such as 323,626 or familia? Thanks in advance po.

How much is your budget? These cars are old. In my experience set aside an extra 1/3 additional budget for initial repairs.

[jodski]

Availability of parts magiging problem mo dyan... speaking from experience

[Jaytamz30]

Mga sir anu kaya problema ng mazda familia 98 model ko pag po nasa traffic at nag bukas ng aircon namamatay ung makina at parang humihina bumatak? Distributor kaya un mga sir? Patulong po

[akosidab]

Mga sir anu kaya problema ng mazda familia 98 model ko pag po nasa traffic at nag bukas ng aircon namamatay ung makina at parang humihina bumatak? Distributor kaya un mga sir? Patulong po

Sa tingin ko u need to tune up your 323. Likinisin ng carb cleaner lahat ng daanan ng air then itatama yung timing belt mo. Baka wala na sa timing at madumi na.

[Marivic Eugenio]

Just new here. May i just also ask kung magkano po price ng mazda 323 bushing? San po makakabili at magpapakabit ng mura lang. Tnx.

[jodski]

Just new here. May i just also ask kung magkano po price ng mazda 323 bushing? San po makakabili at magpapakabit ng mura lang. Tnx.

Depende sa brand na kukunin mo at kung anong bushing. Usually starts at 200 and up.

Kapag wala ka makita na specific sa 323, halos pareho rin sila ng fit ng Ford Lynx.

Happy hunting medyo mahirap na maghanap ng parts nyan

Sent via Tapatalk

[abel291988]

mga sir.. need advise lng po.. kung ok pa ba bumili ng mazda familia 323 ngaun? or choose nlng ibang brand? thanks in advance

[albert.lacson1]

Good day po sa Lahat, kaka register ko lng po now. I Need ur Help po sa Mazda Familia 323 manual ko po.
Nagpalit nko ng spur plag, nag change oil na rin w Purtua additives , Selicon Tension wire , fuel filter & oil filter pero Palyado pa rin po! Pero if rev ko nAMAN WALANG USOK NA PUTI OR BLACK na lumalabas sa muffler?
At saka minsan namamatay engine at Sobrang init ng engine room. Paki Help po Pls at ano po kaya prob nito????
Maraming Salamat po sa mga magbabasa nito at Lalo na sa mkaka Help sakin!