Mazda CX-5

[travajante]

A good brother's KF is going thru this stage of hazing....PADDLES![emoji16]

Sent from my SM-G970F using Tapatalk

Ironically, the hazing was painless & rewarding.[emoji4]

Sent from my SM-G970F using Tapatalk

[3ple4]

OT:

Fyi, I was informed by my SA from Mazda Otis that they will change to Ssangyong & Changan starting October if I'm not mistaken. Also under Berjaya.

Service of Mazda vehicles is available until end of the year

Sad day for us Mazda owners

[vinrem]

Ironically, the hazing was painless & rewarding.[emoji4]

Sent from my SM-G970F using Tapatalk

Is it hard to DIY the steering wheel sir Travs? I was itching to change my streeing wheel but I want it to do it myself but I'm having 2nd thoughts especially when I think about the airbags.

Sent from my ONEPLUS A6003 using Tapatalk

[travajante]

Is it hard to DIY the steering wheel sir Travs? I was itching to change my streeing wheel but I want it to do it myself but I'm having 2nd thoughts especially when I think about the airbags.

Sent from my ONEPLUS A6003 using Tapatalk

Not really, vinrem sir. There are a handful of how-to vids. Good thing w/ kodo, they're all similar. To be safety-sure, unhook your batt's negative terminal.
MAZDA 3 PADDLE SHIFT INSTALLATION FOR I-TOURING?!?!?! VLOG#3 - YouTube

Sent from my SM-G970F using Tapatalk

[Bravoexo]

Php 19.6K ... yeesh

[Nelson de Leon]

Php 19.6K ... yeesh

Double...

Sent from my ASUS_X00QD using Tapatalk

[StockEngine]

mazda recall..

seems like there is carbon buildup from the egr to the intake valves...



Mazda 3, Mazda 6 และ Mazda CX-5 ดีเซล ในออสเตรเลีย ถูก recall เหตุอาจหยุดทำงานระหว่างขับขี่ - HeadLight Magazine

[ray_noel]

Question.

For 2-3 passengers, the manual says i have to put 46psi on my 19s wheel.... pero nilalagay ko lang 40... is it fine? Parang bouncy kasi if 46 and mag iincrease pa yung psi ng mga +2 when the air is hot, right?


Sent from my iPhone using Tapatalk

[travajante]

Question.

For 2-3 passengers, the manual says i have to put 46psi on my 19s wheel.... pero nilalagay ko lang 40... is it fine? Parang bouncy kasi if 46 and mag iincrease pa yung psi ng mga +2 when the air is hot, right?


Sent from my iPhone using Tapatalk

Those pressures are to give optimum efficiency & tread life. Go low-mid 30s, ray bai. More comfort, better grip.[emoji4]

Sent from my SM-G970F using Tapatalk

[Egan101]

Question.

For 2-3 passengers, the manual says i have to put 46psi on my 19s wheel.... pero nilalagay ko lang 40... is it fine? Parang bouncy kasi if 46 and mag iincrease pa yung psi ng mga +2 when the air is hot, right?


Sent from my iPhone using Tapatalk

Grabe naman na tire pressure yan. Subaru suggests 32 psi on the stock 18s of the Forester.

[Archerfish]

Grabe naman na tire pressure yan. Subaru suggests 32 psi on the stock 18s of the Forester.

Same recommendations for the Mazda 6, 36+ psi.

[Egan101]

Same recommendations for the Mazda 6, 36+ psi.

Understandable pa yung 36 psi on 19" tires for the Mazda6. I did remember that the Fiesta requires a 42 psi tire pressure if you are carrying 5 people on board.

[StockEngine]

Question.

For 2-3 passengers, the manual says i have to put 46psi on my 19s wheel.... pero nilalagay ko lang 40... is it fine? Parang bouncy kasi if 46 and mag iincrease pa yung psi ng mga +2 when the air is hot, right?


Sent from my iPhone using Tapatalk

its to prevent sidewall damage. lower pressures will make the sidewall flex abit much when encountering potholes.

[travajante]

its to prevent sidewall damage. lower pressures will make the sidewall flex abit much when encountering potholes.

Potholes...they are best respected & memorized.[emoji4]
One must choose which preservation he should find worthier....
a. tire sidewall & tread
b. suspension components & the human back

Tires are consumables w/ expiry....easy to replace, a periodic must. Not so w/ those in option b.....not to mention painful & punishing.[emoji37]


Sent from my SM-G970F using Tapatalk

[StockEngine]

Question.

For 2-3 passengers, the manual says i have to put 46psi on my 19s wheel.... pero nilalagay ko lang 40... is it fine? Parang bouncy kasi if 46 and mag iincrease pa yung psi ng mga +2 when the air is hot, right?


Sent from my iPhone using Tapatalk

Here's why tire inflation matters | Driving ca - YouTube

more sidewall..talk..

[Nelson de Leon]

mazda recall..

seems like there is carbon buildup from the egr to the intake valves...



Mazda 3, Mazda 6 และ Mazda CX-5 ดีเซล ในออสเตรเลีย ถูก recall เหตุอาจหยุดทำงานระหว่างขับขี่ - HeadLight Magazine

Carbon built-up sa valves... As expected from direct injection.. [emoji3525]

Sent from my ASUS_X00QD using Tapatalk

[travajante]

Carbon built-up sa valves... As expected from direct injection.. [emoji3525]

Sent from my ASUS_X00QD using Tapatalk

If it's just carbon on the valves, they're expected to be serviced. Blasting won't take a day.

Sent from my SM-G970F using Tapatalk

[ray_noel]

Question.

For 2-3 passengers, the manual says i have to put 46psi on my 19s wheel.... pero nilalagay ko lang 40... is it fine? Parang bouncy kasi if 46 and mag iincrease pa yung psi ng mga +2 when the air is hot, right?


Sent from my iPhone using Tapatalk

Sorry my bad. 36 is the standard, i put 34 just yeaterday because i think 36 is too bouncy for 1-3 passengers...

Pero previously, it’s 32 only...


Sorry guys! Thanks for the reply. So i’m on the safe side then....


Sent from my iPhone using Tapatalk

[kisshmet]

^46 psi is for the spare tire

Sent from my SM-A520W using Tapatalk

[hardwang]

If it's just carbon on the valves, they're expected to be serviced. Blasting won't take a day.

Sent from my SM-G970F using Tapatalk

The problem is how much would that cost? Because in the US, it would cost as much as $700 according to some youtube videos. And where can we avail of such services here? Wala pa rin awareness ang mga tao dito sa issue with DI.