Results 1 to 7 of 7
-
April 11th, 2007 02:59 AM #1
Mga Sirs! If you have spare heads for a 97 mazda familia or atleast you can help me in acquiring one, please PM me. I badly need it for my mazda kasi nagoverheat sya and thus causing the timing belt to break. Ayun nagtukuran mga valves and I think nagwarp ang head. You may PM me or txt me thru 09173255414. Thank you very much!
-
-
April 11th, 2007 12:58 PM #3
Gosh sorry to hear about that bro. Nagtataka lang ako bro bakit nagkalat na ang sludges? Ang dami kasi. Tsaka nasira ba ang temp meter mo kaya di mo napansin na overheat ka na? Hindi kasi basta basta masisira ang cylinder head ng ganun. Unless di mo pansin ang init ng makina. Ang B6 engine kasi mainit talaga compared mo sa iba. Cast iron yan kaya baka kala mo normal lang yun init.
Tukod you mean deformed na ang valves or misaligned? Kung warped na ang cylinder head check mo na din ang block kung ok pa. Ang nabasa ko puwede ang 4age na pistons sa B6 engine. Kung stock lang may alam ako sa banawe na puwede mo tanungan... marlon_exceed ng protegetech ang handle niya. Check mo nalang sa site namin kung ano contact niya nawala kasi ang akin.
Maayos din yan bro. Tanong ka na din sa protegetech. Madaming tutulong sayo doon. www.protegetech.org
-
April 12th, 2007 12:06 AM #4
Actually it was my mom who was using it kaya d nya napansin na naputulan na pala sya fanbelt until nagoverheat na sya matagal. The sludges you saw are burnt oil on the head na kinutkut namin kaya mukhang ganon ang itsura. Sir where in banawe can I find this shop for mazdas? Would you kkow how much it would cost for a surplus head? Thanks so much for your help!
-
Verified Tsikot Member
- Join Date
- May 2006
- Posts
- 138
-
April 12th, 2007 09:16 AM #6
Oh ok... kala ko timing belt ang naputulan. Once kasi naputulan or misaligned ang timing belt di mo na mapapaandar ang engine. Exceed banawe ang shop and marlon_exceed ang owner ng shop if i'm not mistaken. Check mo dito sa link, third page ata ang contact info niya:
http://www.protegetech.org/forums/vi...er=asc&start=0
May iba din source ng parts sa banawe like karmelcom, autorama, and goldenisuzu sa pasay pero I have no idea how much would a cylinder head cost. Check mo nalang sa link para may guide ka. Post ka nadin ng help doon baka may nagbebenta ng cylinder head doon. Good luck!
-
April 12th, 2007 12:46 PM #7
exceed surplus parts can help you. look for marlon. he is a member of protegetech.
old banawe location. from quezon ave, pasok ng old banawe, take the first left then nasa left.
Burberry Men Leather Jacket oskarjacket
Verifpro - paypal, ebay, banks, crypto, docs and...