2019 Mazda 3 BP

[JohnM]

CMIIW but 2.5 and 2.5T 3s are made in the US or Mexico. I won't expect to see them here until one of the factories in Asia start building them.

Sent from my SM-A605G using Tapatalk

[travajante]

CMIIW but 2.5 and 2.5T 3s are made in the US or Mexico. I won't expect to see them here until one of the factories in Asia start building them.

Sent from my SM-A605G using Tapatalk

Though USDM, Japan serves em. The 4000strong MazdaToyota Huntsville is yet to be operational.

Sent from my SM-G970F using Tapatalk

[hardwang]

2020 Mazda3 Skyactiv-X 0-100km/h & engine sound - YouTube

With all the hype surrounding skyactiv x, it performs terribly.

[Red_Fred_Said]

Hi.

Not really a problem (not yet, anyway) but this happened twice today. When I did quick presses of the start button, the car started (electricals came on, etc.) then quickly died. I had to press the start button much longer than usual for the car to start and remain started.

Any idea what might be going on? (I don’t think the length of the press of the start button matter, not if the car starts before quickly dying.)

Could it be the car battery? Maybe, the battery in the key fob? Both batteries are a year, 2 moths old. Car is the 2L with I-Stop, purchased Jan. 2020.

Something else?

Insights appreciated.

Thanks.

[jojopad]

The 2021 Mazda3 Turbo Hatchback is the real deal! That white body paint job with the non-chrome trims looks awesome. The rear spoiler looks great too!

Is the 2021 Mazda 3 Turbo Hatchback the GO-TO over the Sedan version? - YouTube

[tigerdoods]

Hatchback of the year

Sent from my Nokia 3210

[jojopad]

Nice and thorough review

Mazda 3 Sportback Elite 2020, an owner's review - YouTube

[Mr Kamote]

Nice and thorough review

Mazda 3 Sportback Elite 2020, an owner's review - YouTube

Sir levi! I follow his yt channel. Very old school approach with his car.

By the way i went yesterday for periodic maintenance and i asked the service person about the extension of PMS for additional of 2 yrs. She said it would cost me 38,500. Just want to ask if its worth it to avail?

[Papajamba]

Sir levi! I follow his yt channel. Very old school approach with his car.

By the way i went yesterday for periodic maintenance and i asked the service person about the extension of PMS for additional of 2 yrs. She said it would cost me 38,500. Just want to ask if its worth it to avail?

Best to ask what’s included in the package.
Lumalabas na 18.5k for the 1st year then 20k for the 2nd year. If 2x/yr ang PMS, around 9k each.
If basic PMS lang like change oil, oil filter fuel/cabin filter, brake cleaning, hindi sulit.


Sent from my iPhone using Tapatalk

[Mr Kamote]

Best to ask what’s included in the package.
Lumalabas na 18.5k for the 1st year then 20k for the 2nd year. If 2x/yr ang PMS, around 9k each.
If basic PMS lang like change oil, oil filter fuel/cabin filter, brake cleaning, hindi sulit.


Sent from my iPhone using Tapatalk

As far as i know susundin lang din kung ano na sa manual. I did not ask much about it in detail kse muntik nako mahulog sa pagkakaupo ko. Im thinking about it since wala ako masyado alam pa sa kotse. Interestingly i saw sa article na hindi covered ng warranty ung 2yr extension. Wth?

[travajante]

As far as i know susundin lang din kung ano na sa manual. I did not ask much about it in detail kse muntik nako mahulog sa pagkakaupo ko. Im thinking about it since wala ako masyado alam pa sa kotse. Interestingly i saw sa article na hindi covered ng warranty ung 2yr extension. Wth?

It's 2years or 4visits worth of PMS MazdaPh is selling, not warranty extension.

Sent from my SM-G970F using Tapatalk

[jojopad]

This dude just bought a 2nd hand Linea Corse for his brand new Mazda3 BP.

Mag specs
19x10 rear +38 offset
19x8.5 front +30 offset

Fit seems ok, no rubbing. The rear seems to be tight though.

Stance looks good imho. No need for lowering springs.

I wonder if the same specs are compatible with the Mazda3 BM/BN

Finally got new set of wheels for Mazda3 BP 2020 - YouTube

[Egan101]

This dude just bought a 2nd hand Linea Corse for his brand new Mazda3 BP.

Mag specs
19x10 rear +38 offset
19x8.5 front +30 offset

Fit seems ok, no rubbing. The rear seems to be tight though.

Stance looks good imho. No need for lowering springs.

I wonder if the same specs are compatible with the Mazda3 BM/BN

Finally got new set of wheels for Mazda3 BP 2020 - YouTube

Bakit hindi pantay? Paano rotation nyan?

Di ba FWD yung Mazda3? Sa mga RWD lang naman usually ginagamit yung wider ang tires sa rear. Some Euro AWD vehicles do have wider tires at the rear.


Sent from my iPhone using Tapatalk

[travajante]

Bakit hindi pantay? Paano rotation nyan?

Di ba FWD yung Mazda3? Sa mga RWD lang naman usually ginagamit yung wider ang tires sa rear. Some Euro AWD vehicles do have wider tires at the rear.


Sent from my iPhone using Tapatalk

Deal may have been too tempting to pass up on, bai.[emoji4]

Sent from my SM-G970F using Tapatalk

[Egan101]

Deal may have been too tempting to pass up on, bai.[emoji4]

Sent from my SM-G970F using Tapatalk

Common sense still beats any good deal, bai.


Sent from my iPhone using Tapatalk

[travajante]

Common sense still beats any good deal, bai.


Sent from my iPhone using Tapatalk

But it's not our car, bai. What rocks for us may not for them.[emoji4]

Sent from my SM-G970F using Tapatalk

[jojopad]

Deal may have been too tempting to pass up on, bai.[emoji4]

Sent from my SM-G970F using Tapatalk

The dude was able to find a rare good deal, and he is only after for that "masculine" rear stance [emoji12]

[Dr.Kamiya]

Bakit hindi pantay? Paano rotation nyan?

Di ba FWD yung Mazda3? Sa mga RWD lang naman usually ginagamit yung wider ang tires sa rear. Some Euro AWD vehicles do have wider tires at the rear.


Sent from my iPhone using Tapatalk

Ang napapansin kong setup for performance/track-driven FWD is the wider tires actually go in front. One of the fastest FWD cars tested on Hot Version's touge series, the Seeker FD2 was running 285 width tires up front! (paired with 225 rear).

[travajante]

This dude just bought a 2nd hand Linea Corse for his brand new Mazda3 BP.

Mag specs
19x10 rear +38 offset
19x8.5 front +30 offset

Fit seems ok, no rubbing. The rear seems to be tight though.

Stance looks good imho. No need for lowering springs.

I wonder if the same specs are compatible with the Mazda3 BM/BN

Finally got new set of wheels for Mazda3 BP 2020 - YouTube

BM/BN can only take 8.5 et45 upwards & no wider than 225s without tweaking rear camber or rolling rear fenders.The gen3 advantage, fronts you can have camber bolts. Rears can take camber arms. None of those 2 are possible options for the gen4....BPs will require front camber plates(pricey) & rear camber shims(complicated to DIY).

Sent from my SM-G970F using Tapatalk

[jojopad]

BM/BN can only take 8.5 et45 upwards & no wider than 225s without tweaking rear camber or rolling rear fenders.The gen3 advantage, fronts you can have camber bolts. Rears can take camber arms. None of those 2 are possible options for the gen4....BPs will require front camber plates(pricey) & rear camber shims(complicated to DIY).

Sent from my SM-G970F using Tapatalk

Damn! So looks like I'll try my luck at the FB marketplace and chance upon a 2nd hand Rota Flow Forged FF01.

Btw, I just realized that your wheels are similar to Konig Ampliform Ampliform - Konig Wheels