2015 Mazda 2

[Archerfish]

I wish I could still improve my NVH..

pictures as promised

Beautiful!!!

However, I don't think I'll have the guts to do this modification... I guess I'll stick with what I have.

[Archerfish]

Had I the tick, I'd probably leave it alone, too. I've had cars that came w/ all sortsa noises, I should have some acquired immunity.[emoji4]
RPF1s....you gotta share some pics, sir![emoji106]

Sent from my SM-G950F using Tapatalk

I remember back then with my CR-V 98, I just can't find the source of this noise whenever I turn sharply. One day as I was cleaning it, I decided to remove the plastics underneath the seats out of curiosity. There I found a socket wrench!

So the noise went away.

[Archerfish]

Noise immunity? I think I also developed the skill... I couldn't find the bushings so I asked them to at least minimize the noise.

[travajante]

Noise immunity? I think I also developed the skill... I couldn't find the bushings so I asked them to at least minimize the noise.

Which bushes of which car?

Sent from my SM-G950F using Tapatalk

[Archerfish]

CR-V 98, the three bushings for the exhaust pipe. Well, the said vehicle is now with my younger brother. I gave it to him and he is now selling it. I just hope that he will try to enjoy it for a while, the cosmetic customizations I made. Unfortunately, I don't think that's the case

[travajante]

CR-V 98, the three bushings for the exhaust pipe. Well, the said vehicle is now with my younger brother. I gave it to him and he is now selling it. I just hope that he will try to enjoy it for a while, the cosmetic customizations I made. Unfortunately, I don't think that's the case

Ahhh...the rubber hangers...very minor issue.[emoji4]

Sent from my SM-G950F using Tapatalk

[Archerfish]

Yes, I didn't know it is called that way. It's a minor thing, but I find it annoying.

[travajante]

Yes, I didn't know it is called that way. It's a minor thing, but I find it annoying.

OE ones shouldn't be pricey.[emoji4]

Sent from my SM-G950F using Tapatalk

[Archerfish]

Unfortunately, I couldn't find those things... well, I haven't been searching that much.

May I know the fuel consumption and cost to maintain an entry level Mazda? My brother isn't interested to keep this CR-V and I understand. He is not the one who made the customizations and the original decision is really sell it and use it to buy another car for him.

[travajante]

Unfortunately, I couldn't find those things... well, I haven't been searching that much.

May I know the fuel consumption and cost to maintain an entry level Mazda? My brother isn't interested to keep this CR-V and I understand. He is not the one who made the customizations and the original decision is really sell it and use it to buy another car for him.

Yojin PMS for first 3years, like your 6.... free. Basics are like any other car. Petrol, tires, batt, fluids. Surprisingly & consistently, the 1.5M3 gives better FC against the M2. Credit the 3's slightly higher compression ratio & 4-2-1 header. City traffic should average 8upwards....Then, you have car care & tempting mods.[emoji4]

Sent from my SM-G950F using Tapatalk

[Archerfish]

Yojin PMS for first 3years, like your 6.... free. Basics are like any other car. Petrol, tires, batt, fluids. Surprisingly & consistently, the 1.5M3 gives better FC against the M2. Credit the 3's slightly higher compression ratio & 4-2-1 header. City traffic should average 8upwards....Then, you have car care & tempting mods.[emoji4]

Sent from my SM-G950F using Tapatalk

I thought Yojin is model specific, thank you for that information. I better inform my father about this. I don't know what my father and brother have agreed upon but I want them to consider first Mazda.

I'm not a brand loyalist, I buy what I want and what is useful for me. But for me not to recommend considering Yojin... I think​ I'll be loyal to Mazda. Suddenly, I remembered 626... how I liked that car back then.

[fuzzylog1c]

Hey guys my mazda2 is up for its first 6mos pms on saturday. Anything to watch out for? My dealer is Mazda Alabang

[travajante]

Hey guys my mazda2 is up for its first 6mos pms on saturday. Anything to watch out for? My dealer is Mazda Alabang

Nothing really outside the basics. But these are what I always remind the service guys....
In the absence of proper fluuds, top up H2O solutions w/ pure distilled water, not
tap. Mazda coolant is FL22. Grab a bottle or 2. Make sure oil isn't overfilled. Have batt health & solution level checked. Stock isn't maintenance-free.

Sent from my SM-G950F using Tapatalk

[travajante]

OVT just released an add on to their custom tunes. Throttle Map. Linear response!!!! The cherry on top sweetens it further![emoji106][emoji106][emoji106][emoji106][emoji106]
Call OVTph +639174726847 for details.


Sent from my SM-G950F using Tapatalk

[mcxiand]

OVT just released an add on to their custom tunes. Throttle Map. Linear response!!!! The cherry on top sweetens it further![emoji106][emoji106][emoji106][emoji106][emoji106]
Call OVTph +639174726847 for details.


Sent from my SM-G950F using Tapatalk

Sir Travs, pwede ba yang OVT for manual transmission?

[travajante]

Sir Travs, pwede ba yang OVT for manual transmission?

Yup.[emoji4]

Sent from my SM-G950F using Tapatalk

[travajante]

A buddy's...really doesn't need much![emoji106]


Sent from my SM-G950F using Tapatalk

[tyr0]

A buddy's...really doesn't need much![emoji106]


Sent from my SM-G950F using Tapatalk

[emoji7][emoji7][emoji7]

Sent from my ONEPLUS A3000 using Tapatalk

[mcxiand]

A buddy's...really doesn't need much![emoji106]


Sent from my SM-G950F using Tapatalk

Sir Travs, di kana gumagamit ng plate relocator? Ano din po specs ng Rim and Tire mo sir?

[travajante]

Sir Travs, di kana gumagamit ng plate relocator? Ano din po specs ng Rim and Tire mo sir?

That's a buddy's car, sir. He'll relocate. Wheels are 17x7.5 et45 w/ 5mm spacers, so et40. Tires are 205/50/17 Aeolus AU04.

Mine is same old...
Relocated

& on 18x7.5 et35, 225/40s...


Sent from my SM-G950F using Tapatalk