DIY rim paint

**sabawballs** · November 28th, 2012 02:54 PM

Originally Posted by tsinelas30

sir kuskos power nalang ng tide at brush yan lilitaw na ulit pagkablack.
salamat

1.hindi po ganun katibay compare sa anzhal.
pede siguro tumibay to kapag ng topcoar ako ng k92 or anzhal.
pag bosny po pansamantagal lang.hehe
2.sobra pa sir. yung liha kahir 2pcs lang.
yung 1spraycan good for 2rims. may konting sobra.
stripsoll konti lang din sobra.
3.hindi naman po nakaapekto yung stripsoll sa gulong. una nilagyan ko ng stripsoll yung mismong gulong then observe.
since ok naman tinuloy ko na.
4.kintab sir. hindi mahahalatang DIY at bosny spray can lang ginamit.
5.naging candy tone.haha lumandi yung kulay parang ang tamis. ginawa ko pinatungan ko ule ng 2coats ng metalic brown

ayos to! thanks for answering my questions... gandang alternative kung nagtitipid and parang pwedeng gawin every week palit kulay. hahaha!
+rep for you boss!

now to find cheap rims na pwedeng palitan ng malanding kulay :P

**tsinelas30** · November 28th, 2012 03:14 PM

Originally Posted by sabawballs

ayos to! thanks for answering my questions... gandang alternative kung nagtitipid and parang pwedeng gawin every week palit kulay. hahaha!
+rep for you boss!

now to find cheap rims na pwedeng palitan ng malanding kulay :P

Hahaha uu nga sir. pedeng palitan lage kase hindi masyadong mabigat sa bulsa.

Goodluck sa project mo..

**greatauror28** · November 28th, 2012 03:33 PM

PlastiDip is the way to go for temporary colouring for the mag wheels.
Kapag sawa kana, just peel it off then coat another color again.

**Bin Diesel** · November 28th, 2012 05:17 PM

Originally Posted by greatauror28

PlastiDip is the way to go for temporary colouring for the mag wheels.
Kapag sawa kana, just peel it off then coat another color again.

ano yung plastidip?

TS, ingat ka lang na wag ka ma flatan ng gulong yari sa vulcanizing shop yang ginawa mo kapag nagkataon.

**tsinelas30** · November 28th, 2012 05:42 PM

Originally Posted by Bin Diesel

ano yung plastidip?

TS, ingat ka lang na wag ka ma flatan ng gulong yari sa vulcanizing shop yang ginawa mo kapag nagkataon.

Yes sir, handa naman na ako dun.. may natira akong konti pang retouch if ever.ehehe

**threx666** · November 28th, 2012 06:53 PM

Very nice DIY sir,

Did you use High temp paint po ba sir? Mas maganda po kasi pag high temp kasi the rims are subjected to high temp

Just my 2 kusing hehehe

Maganda din yun gun metal na color hehehe

**renzo_d10** · November 28th, 2012 06:56 PM

Sir next time try mo puti. Maganda ang white on white

Pero nice job. Ang tyaga hehe

Sent from my GT-P7310 using Tapatalk 2

**tsinelas30** · November 28th, 2012 07:05 PM

Originally Posted by threx666

Very nice DIY sir,

Did you use High temp paint po ba sir? Mas maganda po kasi pag high temp kasi the rims are subjected to high temp

Just my 2 kusing hehehe

Maganda din yun gun metal na color hehehe

Regular paint lang po ginamit ko. wala sigurong hi-temp paint na metalic brown.

Originally Posted by renzo_d10

Sir next time try mo puti. Maganda ang white on white

Pero nice job. Ang tyaga hehe

Sent from my GT-P7310 using Tapatalk 2

Salamat
Sir sa susunod na plano ko baka DIY Buffing naman parang chrome finish..