The Kia Sedona/Carnival Thread [ARCHIVE]

**Trendy08** · September 12th, 2005 01:08 PM

i recently replaced my headlights with h7 super white. pag kakabit ko nga biglang nakita ko sa isang thread, wala daw kwenta yung mga ganung bulbs! hehe pero solve naman ako sa illuminition, cguro depende sa klase ng bulb. not comparable to HID pero white sya..bka lagyan lang ng relay ay lumakas pa.

re adjustment:
meron adjustment ng up and down sa gitna ng high at low na bulbs. mine has a hole sa body pero wala yung screw to adjust...not sure why (there is supposed to be a screw that you can turn para u don't have to take off the assembly. so in my case, tinaggal ko yung assembly (tatlong size 10 na bolt lang naman) then andun sa sa bottom middle nung assembly , there is just this black round thing that you can turn. yung left and right naman near the upper portion of the low beam. may hole din sa body pero wala yung adjustment screw....not sure if Im making sense...

let me know if you need pix. (wala rin bang adjustment screw yung sa inyo?)

**ericmm** · September 12th, 2005 01:49 PM

meron screw na puwedeng sundutin pero ang hirap so tinanggal ko na nga rin yung assembly and then i turned it clockwise - placed the assembly back tapos parang no change. I removed the assembly again and turned it counter clockwise parang wala ring nangyari. Sa inis ko pinabayaan ko na lang yun nga lang naiinis naman ang mga kasalubong ko sa kalye. hay naku.... Try ko na lang ulit.

Any suggestions on how to increase illumination of the fog lights?

**bisoy** · September 12th, 2005 04:56 PM

question re aircon..... front aircon mahina ang blower. pero malamig naman. yung sa rear mukhang ok naman. ano kaya problem? my ride is a local 2000 model carnival. thanks

**mikey177** · September 12th, 2005 07:41 PM

Mga sir, saan po ba sa Banawe yung Fronte? It seems like a lot of you guys get spare parts from there, so I am planning to stock up on stuff like filters and belts when I visit QC in the future.

bisoy:: Di kaya mahina na yung motor ng blower mo sa harap kaya mahina yung buga nya? Does your aircon unit have the microfilter thingy that was discussed a few pages back? If it does, is it still in good condition?

**e_chen** · September 13th, 2005 11:06 AM

Originally Posted by mikey177

Mga sir, saan po ba sa Banawe yung Fronte? It seems like a lot of you guys get spare parts from there, so I am planning to stock up on stuff like filters and belts when I visit QC in the future.

.... fronte is at Kabignayan street near cor. Banaue St. (Banaue st na in between q. ave. and e. rod) tel # 712-0919 / 712-0919

.... you can try also asking from "karmelcon" at 414-3989 look for ivan (just mention my name---edzel)...

**mikey177** · September 13th, 2005 04:09 PM

Thanks, edzel. Will look them up when I'm in QC.

**bisoy** · September 13th, 2005 08:42 AM

mikey, i dnt know kung humina na ang motor ng aircon blower ko. wala kasi akong ma compare na carnival 1st gen. tinitingnan ko nga yung microfilter pero i cnt find it nung nakababa ang compartment. actually, i had the aircon cleaned (general cleaning) jst last week. mas malamig na ang aircon but the blower is a little mahina (i think)....

**benchph1** · September 13th, 2005 05:48 PM

hmmm baka ganyan din problema ng carnival namin rodski. occasionally umaabot below 1/4 ang fuel gauge ko eh :D tapos kakapalit ko lang ng fuel filter. dapat bng i-pump before o after magpalit ng fuel filter? o di na kailangan. tanda ko ginawa lang ng mechanic nilagyan lang niya ng diesel yung filter para nga daw hindi na i-pump..

**altec** · September 14th, 2005 05:01 PM

guys, had my tank drained and cleaned. Ang daming black colored sandy stuff nakuha, both from the filter and the fuel tank. My mechanic then noticed that may bumubula na lumalabas from the priming pump. When they dismantled it, they found out gasgas na, kaya may lumalabas na fuel, and that means may leak at may hangin, that's why kulang ang pressure. It may be the cause of my fuel knock. I really hope so. Still doesn't explain though why the fuel knock went away when I loaded with shell without biodiesel and it came back when I reloaded from a non shell station and with biodiesel again. But I did notice when I pumped it, supposedly to bleed it of any excess air and water, that its supposed to harden o maging hirap ipump once it has been thoroughly bled, pero di nangyari. Doon palang may konting duda na ako, but since Kia didn't say anything, nor did some of my mechanics previously, di na rin ako nag comment tungkol doon. Bumili na lang ako ng bagong priming pump assembly (whole set including new fuel filter) because they do not sell just the priming pump, and I left it at my in house motorpool. Will get the car either end of the day or tomorrow. (fingers crossed)

Diesoline, I tried to fit the vic fuel filter of an L300, di siya kasya sa priming pump, iba ang fit. This is in preparation of the next time I will change my filter, Racor na ang ikakabit ko! Ano kaya ang spin on filter ng racor na kasya sa sedona?