newbie isuzu fuego pics?and help??

[hac]

hi!!! newbie lang po dito! thing is my friend recently acquired a isuzu fuego 96 ata? gusto na namin i modify, he got a go already for some lifts pero all the other stuffs kami na bahala! yun nga lang sanay ako sa mga gamit nang cars pati shops kaya may ma sasuggest ba kayong stores? and pls may mga pics ba kayo na pwedeng i post para sample lang para makita naman namin yung full potential nya?both engine and aesthetics! lam ko sobrang dami dito eh! thanks!

[Ungas]

What kind of lift are you pertaining to? Body lift or suspension lift? Is it a 4x4 or a 4x2 double cab Fuego?

[Ungas]

If it does not have canopy for the rear bed, it would be wise to invest protecting it with rubberized paint that doesn't chip off easily with heavy cargo.

[ARB]

or this one



hmmm that blue pick-up looks familiar.

[hac]

kala ko i wont get any replys w my post! ill have my friend log in here too para he can tell you guys all the details he want. i was there nga kanina sobrang excited na kami tom 1st time namin labas fo the car para mag hanap nang fog lights and the bed. its the model na nipost ni ARB na fuego! where makakabili nang murang functional snorks?
its double cab and i think di naman ganun ka taas pa yung lift nya like round 4-5in lang ata? thanks talaga coz i dont know much about trucks! and ill be posting here for help most of the time til we get everything done! ano ba mga interior mods available for fuegos? like kits and gauge faces? thanks! oh last saan and how much mo nakuha yang bullbar mo ARB?ganda sobra!

[hac]

suspension lift yung habol nya eh!

[hac]

oh and i forgot to ask nga pala san kaya kami makakakita nang fender flares parang sa frontier? yung may lalagyan nang bolts and mas malaki than the usual?

[hac]

parang ganito..kahit sana magpafabricate kami ok lang eh may ma sasuggest kayo?thanks

http://www.cardomain.com/memberpage/418161

[Ungas]

Ngerks! Di ganun kataas kamo ang gusto nyong lift but you indicated 4-5 inch lift?! Minor suspension lifts are only 20-50mm lift. And I think thats about it for torsion bar cranking. A 70-90mm lift kit might need more budget of about Php30,000-50,000 if I'm not mistaken. There are only two brand of snorkels available in the market, Safari brand whish is locally distributed by RATS and Airtec brand sold by Armark International.

The Nissan truck link you posted had body lift to achieve the lift and accomodate bigger tires.

[kimpOy]

Ngerks nga!
3" calmini suspension lift plus 3" body lift yun my friend.
100K yun dito
31 inch tires lang hirap na ang stock frontiers eh

the easiest way and less expensive is this:

crank the t-bar (do not exceed 2 inches)
fabraicated long shackles (do not exceed 2")
and 31 " tires

instant 2.5 suspension lift dre.

[hac]

well about the lift kakakausap ko lang sa kanya and sabi nya sakin yung gagawin daw is 2in suspension lift and 3in body lift, well at least yun sabi nang dad nya sa apari! anyway, thanks for the replys! may masasuggest ba kayo na magaling mag paint over stainless parts? he wants his bumper kasi na puti din i told him minsan nagchichip off yung paint sa stainles but he really wants to try. any suggestions?

[hac]

oh and the pic provided was for the fender flares not for the lift! di namin kaya maaford nang ganun ang mahal nun! hehe!

[Ungas]

Bumper stainless steel? Baka naman chrome finish lang yan? Bakbakin ang chromed parts, lihain ng pino, primer para di agad kapitan ng kalawang, then paint.

2 inch for suspension and 2 inch for body lift is definitely your direction. Pero kung sa 3 inch body lift, baka mahirapan kayo sa pag extend ng parts involved. Steering, shifter, fuel line, raiator hose and others.

[OTEP]

Yung bumper ng LC70 namin na chrome pina-repaint ng gun metal. Nasa surface prep lang yan.

3" body lift? Hindi kaya maputol ang lift blocks mo nun?

Sa Mitsubishi madami nang mods when you go above 2" sa body lift. Kaya nag-suspension lift na lang muna ako.

[hac]

ahhh sorry sanay kasi sya dun sa luma nyang car na forrunner na gas eh (kaya binenta) stainless yung bumper, so pwedeng tuklapin na lnag yung sa bumper natin? pwede pala thanks for the respnse!

[OTEP]

Hindi na kailangan tuklapin yun. Kakapit naman ang primer dun.

Basta linisin niyo ng todo. Xylene ang ginagamit na panglinis para kumapit ang primer. Once kumapit ng maayos ang primer, para ka na lang nagpipintura ng standard metal sheet nun.

[hac]

thanks otep, UST ka pa din ba?tiga dun din ako eh

[hac]

ahhh..nga pala pasensya na kayo sa mga questions ko yung iba di nag mimixup nang tama kasi sanay talga ako sa car di sa mga trucks, sakin pababa eh sya pataas eh! im just asking for him sa mga naririnig ko kaya kulang masyado details!

[OTEP]

Oo, nandito ko sa UST ngayon. Nagpapaka-henyo.

Saan ka sa USTe?

[hac]

o?wala nang pasok ah! hehe! sobrang sipag! educ HRM ako eh. dati legma AB nag shift!