Isuzu Anti Theft System (IATS)

[jigen_III24]

[SIZE=3]Happy New Year to all the members. I owned an Isuzu Crosswind xuv 2005 model, last January 1, 2010, sakto new year nagloko ung alarm ko, i don’t know if lowbat lang yung remote or sira na talaga. Alarm siya ng alarm & i can't start the engine. So what I did is is to turn off the alarm using the emergency reset button, I just followy ung nakalagay sa manual, so nawala na ung alarm at napa-start ko na. The following day bumili ako ng battery the problem is i don’t know how to turn on the alarm, wala nakalgay sa manual..Pano po ba i-turn on yung IATS. Do I need to bring it to Isuzu service center to re-program? Thanks in advance sa help...[/SIZE]

[Benzmizer]

[SIZE=3]Happy New Year to all the members. I owned an Isuzu Crosswind xuv 2005 model, last January 1, 2010, sakto new year nagloko ung alarm ko, i don’t know if lowbat lang yung remote or sira na talaga. Alarm siya ng alarm & i can't start the engine. So what I did is is to turn off the alarm using the emergency reset button, I just followy ung nakalagay sa manual, so nawala na ung alarm at napa-start ko na. The following day bumili ako ng battery the problem is i don’t know how to turn on the alarm, wala nakalgay sa manual..Pano po ba i-turn on yung IATS. Do I need to bring it to Isuzu service center to re-program? Thanks in advance sa help...[/SIZE]

Partner, follow these steps:

1) Enter your vehicle and close all doors
2) Switch your ignition to "ON" position (all gauge lights should light up)
3) Continuously press (HOLD) the "lock" button of your transmitter until you hear 2 chirps. Release hold on "LOCK" button.

That should do the trick. Good Luck!

[jigen_III24]

Thanks Benzmizer but I tried it na, ayaw pa din mag-work. Sira na kaya yung remote ng alarm? Pinalitan k na din kasi ng battery gnon p din..Nakakabili ba ng remote nun sa ISUZU no need to bring the car or kailangang dalin for re-program?

[Benzmizer]

Thanks Benzmizer but I tried it na, ayaw pa din mag-work. Sira na kaya yung remote ng alarm? Pinalitan k na din kasi ng battery gnon p din..Nakakabili ba ng remote nun sa ISUZU no need to bring the car or kailangang dalin for re-program?

Hmmm, that's odd.

But to be on the safeside, bring it to an authorized ISUZU dealer. They may be able to reprogram your alarm system if not recommend a replacement (if existing alarm is already shot).

If you so decide to have the existing alarm replaced with an aftermarket, best to bring it instead to a shop like Winterpine. You'd likely get nice alarm for a reasonable price.

[RajiBoy]

Saan ba makikita yung reset button?

[Benzmizer]

Saan ba makikita yung reset button?

The Crosswind's reset button is in the interior fuses box located at the left side (driver's side) of the dashboard. (see pic below)

[RajiBoy]

The Crosswind's reset button is in the interior fuses box located at the left side (driver's side) of the dashboard. (see pic below)

Wow sir Benzmizer, may kasama pang jpeg! Nagkanda-stiff neck stiff neck na ata ako endlessly craning and rotating my neck (ala Linda Blair from The Exorcist) trying to look for that device under the dash, pero wala pa rin. The truth is, I actually discovered it, pero natakot ako pindutin at pakialaman kasi baka sumabog at mag-end yung world.

Thank you bossing!!! Can I also use that thingy to temporarily disarm the IATS and then re-arm it later when necessary (parang master on/off switch)? Nakakaasar kasi minsan. Parang mahingahan at mag-fart lang yung doggy namin, mag-aalarm na agad (minsan pa madaling araw ... bwiset).

Thanks again!!!

[janalla]

[quote=jigen_III24;1394973]Thanks Benzmizer but I tried it na, ayaw pa din mag-work. Sira na kaya yung remote ng alarm? Pinalitan k na din kasi ng battery gnon p din..quote]

I am now having the same problem... Also tried doing the advise of Sir Benzmizer, but it wont work (with both of my 2 remote transmitters with new batteries), similar to the experience of Jigen III24 almost a year ago na.

Tip naman Sir Jigen (or anyone, please), what should i do to solve this problem?

Could it be the car battery even if malakas pa naman yata - one-click starting pa naman at any time?

[Benzmizer]

[quote=janalla;1630147]

Thanks Benzmizer but I tried it na, ayaw pa din mag-work. Sira na kaya yung remote ng alarm? Pinalitan k na din kasi ng battery gnon p din..quote]

I am now having the same problem... Also tried doing the advise of Sir Benzmizer, but it wont work (with both of my 2 remote transmitters with new batteries), similar to the experience of Jigen III24 almost a year ago na.

Tip naman Sir Jigen (or anyone, please), what should i do to solve this problem?

Could it be the car battery even if malakas pa naman yata - one-click starting pa naman at any time?

It's never the car battery if the car starts easy.

If it's not the transmitter battery, it could be the module (due to age). Best to let a seasoned electrician take a look at it. They would easily determine if there is something wrong with the alarm module, wiring, etc.

[janalla]

Thanks Sir Benz. But before going to an expert, i hope you can post here a diagram of the IATS' wiring connections? San po ba makikita yung mga sensors for the remote transmitter?